Kent · TR19 inspections and grease testing
TR19 inspections in Newenden
TR19 inspection for Newenden and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Kitchens taken over with no cleaning records
- Systems that need surveying before cleaning
- Checking the result of a recent clean
Your questions about TR19 inspection in Newenden
Who is the fire and rescue service for Newenden?
Fire safety enforcement in Newenden is handled by Kent Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Can you work in Newenden outside opening hours?
Yes, nights and weekends are routine for us. It means the site in Newenden keeps running as normal. When you call 0345 646 2711, or send details by email, mention when the site is quiet.
How do you protect the area?
We start with protection: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.
Do you check other contractors’ cleans?
We visit after a clean, take readings at set points and photograph the system. The report flags anything missed.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line, for problems that cannot wait. Call us any time and explain what’s happened.
What is a WFTT or DTT grease test?
Readings are taken using the Wet Film Thickness Test or the Deposit Thickness Test, then compare them with the TR19® Grease figures.
What does TR19 mean?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Do you look at the system first?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
How we handle TR19 inspection in Newenden
Grease thickness testing tells you how much grease is sitting in the canopy, ducts and fan. Readings are taken at set points using the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT). The results show whether the system needs cleaning and how soon. Common call-outs are for kitchens taken over with no cleaning records and uncertainty over how often to clean, across insurer audits, deposit thickness tests and pre-clean surveys.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. We agree access and timings in advance.
The paperwork matters as much as the work. Each visit is written up with photos, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Place
- Newenden (TN18)
- Wider area
- Kent
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Honest limits
TR19 inspection cannot fix everything, and we’d rather say so up front. It won’t put right:
- Mechanical faults in the extract
- The grease itself, which needs a full or spot clean
- Ductwork that was designed or installed badly
If in doubt, ring 0345 646 2711 or email us and we will say what we think.
Parts of the system we cover
- Pre-clean surveys
- Deposit thickness tests
- Insurer audits
- Wet film thickness tests
- Post-clean checks
- Access surveys
Staff cleaning versus specialist work
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Multi-site and managed buildings
Keeping records across a portfolio is half the battle. Each visit produces a dated report with photos, ready to show insurers, fire officers or EHOs.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
What affects the quote in Newenden
You’ll get a fixed price before we start. It’s based on:
- What state the system is in
- The times the site is available
- Whether several sites go on one quote
- Site rules, permits and inductions
Putting the work off seldom saves money. Problems in a system tend to grow, and a neglected system can mean more work. If you are unsure, phone us on 0345 646 2711 or send us an email for straight advice and a fixed quote.
What we need to know
When you call or email, these details help:
- A few general shots of the system
- Close-ups of filters, grilles, hatches or access panels
- Where the site is and what kind of site it is
- Your opening hours and when the area is out of use
For TR19 inspection in Newenden, ring 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. We normally send a fixed quote within one working day.
Common problems we fix in Newenden
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. A cleaning interval set years ago may no longer fit.
Keep an eye out for any of the following:
- Surveys needed before quoting a full clean
- Sites with gaps in their extract records
- Extracts that may be over the 200 micron mean
- An insurer’s request for a TR19 audit
Where a hall near Parish Church of St Peter, or anywhere in Newenden, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
What to look for in a quote
- If the quote is a fixed price or an estimate
- When they can work, and whether that is outside your opening hours
- What insurance they carry
- Which accreditations they hold, and whether you can check them
How the job changes from site to site
Extract fan and discharge
Grease on the fan adds to wear. The inspection shows whether it needs cleaning now.
Horizontal duct runs
Grease can gather thickly at bends and along long runs, out of sight of the kitchen.
How it works
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. On site, the work takes an hour or two for a single kitchen, longer for a large or complex system. Somewhere like Newenden, lanes, gates and parking are worth mentioning in advance.
- We go through any past certificates and reports.
- We follow the extract from canopy to discharge.
- We note where access panels are and where more are needed.
- We measure the grease and photograph each point.
- You get a report and a fixed quote for the clean.
Getting ready for the visit
- Let us know how we reach the system, including roofs, risers and plant rooms
- Dig out any earlier paperwork for the system
- Mention any sign-in, permit or induction we need
Ask for a quote
Want a quote for TR19 inspection? Please phone us on 0345 646 2711 or use the quote form and tell us about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
Read more
Kitchen extracts in Newenden
At about 45 miles from central London, Newenden sits well inside the area we cover. The visit is fixed around your opening hours, not ours. In Newenden, food businesses are inspected by environmental health officers from Ashford council. Extraction counts as kitchen equipment, so its condition can come up on the day. A dated certificate in the maintenance file answers the question before it’s asked.
Historic houses near Newenden, such as Great Dixter about 1.7 miles south-west, are a reminder that older buildings with event kitchens can have long, awkward duct routes. If you run catering at a healthcare site, such as a hospital like Benenden Hospital about 4.9 miles north, the extract may need cleaning more often than a part-time kitchen.
Newenden is about 10 miles north of Hastings, in Kent. From the centre of Newenden to the outskirts, TR19 inspection is available to all kinds of commercial premises, from small sites to large estates. Newenden is one of 922 places in Kent where we work for TR19 inspection. Our Maidstone page covers sites nearby, about 18 miles away.
All of TN18 is within our area for TR19 inspection, from busy streets to back roads. We also cover the places around Newenden: Rolvenden Layne (2 miles north-east), Rolvenden (3 miles north), West Cross (3 miles north), Strood (3 miles north-east) and Small Hythe (4 miles north-east). Within a short drive, we also cover Ashford (14 miles north-east), Paddock Wood (15 miles north-west), Tenterden (5 miles north-east), New Romney (14 miles east), Staplehurst (11 miles north) and Stanhope (13 miles north-east).
Around Newenden
Typical jobs here are in premises near The White Hart Inn and the streets around them. Nearby you’ll also find Benenden Hospital (4.9 miles north) and The C.M Booth Collection (2.6 miles north). Open spaces near Newenden include Flatropers Wood.