Oxfordshire · TR19 inspections and grease testing
TR19 inspections in Lyford
TR19 inspection for Lyford and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Pre-clean surveys before a first TR19 clean
- Post-clean verification after another contractor’s clean
- Ductwork where grease may be over the TR19 limits
Lyford kitchens: local notes
Lyford sits within the area of Oxfordshire Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Food hygiene inspections in Lyford are the job of Vale of White Horse council’s environmental health team. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked.
If you run catering at a historic house or estate in the area (Longworth House is about 3.2 miles north), event kitchens in older buildings often have awkward duct runs that need planning. Volunteers running a hall kitchen near Church of St Mary, or anywhere in Lyford, may not know when the extract was last cleaned, and a grease test settles it.
Lyford is about 4 miles north of Wantage, in Oxfordshire. Every kind of commercial site in Lyford, we can take on TR19 inspection. We can work out of hours so the site keeps running. Across Oxfordshire, we cover 443 places, Lyford among them. We also work in Oxford, about 11 miles from Lyford.
We cover every part of the OX12 postcode area for TR19 inspection and the streets around it. Close by, we work in Charney Bassett (1 mile west), West Hanney (1 mile south-east), Denchworth (2 miles south), Kingston Bagpuize (3 miles north) and Pusey (3 miles north-west). Further out, we also cover Oxford (11 miles north-east), Didcot (8 miles east), Abingdon-on-Thames (7 miles east), Witney (10 miles north), Carterton (11 miles north-west) and Wantage (4 miles south).
Landmarks near Lyford
In Lyford, that means kitchens and buildings near The Chequers pub and the streets around them. Nearby you will also find Abingdon Community Hospital (6 miles east) and Hinton Waldrist Castle (3.1 miles north). For a walk, there’s Hitchcopse Pit and Chain Hill.
How we handle TR19 inspection in Lyford
A pre-clean survey is the diagnosis, and the clean is the treatment. Readings, pictures and notes on access are gathered from end to end, so the quote and the clean fit the real system. The work covers post-clean checks, pre-clean surveys and wet film thickness tests, and the jobs we see most are systems cleaned on a calendar with no measurements and cleaning intervals that may not suit the kitchen.
Somewhere as small as Lyford, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease.
Every visit ends with a written report and photos, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Lyford (OX12)
- Wider area
- Oxfordshire
- Paperwork
- Certificate plus before-and-after photos
- Quote
- Fixed quote, normally within a working day
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
How the job changes from site to site
Canopy and plenum
The plenum behind the filters can carry a lot of grease. Readings and pictures are taken in the plenum as part of every survey.
Vertical risers
Risers in multi-storey buildings can pass through other areas, so we arrange access ahead of time.
What happens if it’s left?
Post-clean verification shows whether the system was left the way the certificate says, before the next clean is due. If the system at a site near Lyford fails, there may be nowhere nearby to move to.
Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered, and you’ll get one fixed quote.
Why book with us
- Fully insured
- Every job surveyed first
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- A single point of contact for sites across the South East and London
Signs you need TR19 inspection in Lyford
You can’t judge grease thickness by eye. Clean filters can hide a heavy layer behind them, so readings are the reliable guide.
Look out for these warning signs:
- Kitchens whose menu or hours have changed
- Kitchen extract systems with no recent grease readings
- Systems that need surveying before cleaning
- Insurance renewals needing proof of TR19 cleaning
Healthcare kitchens, like those at hospitals such as Abingdon Community Hospital (about 6 miles east), often cook for long hours, which puts them in BESA’s heavier-use bands.
What to look for in a quote
- Whether inaccessible sections are listed on the report
- If the quote is a fixed price or an estimate
- What’s included in the scope, part by part
- Whether the work can be done while the site is closed
How the visit works
Your staff don’t need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. Visits to a village like Lyford are booked in advance, at a time that suits whoever runs the site.
- First we look at the system’s cleaning history, if there is one.
- We follow the extract from canopy to discharge.
- We note where access panels are and where more are needed.
- We measure the grease and photograph each point.
- You get a report and a fixed quote for the clean.
Preparing for the visit
- Clear loose items from the work area
- Mention any locked doors, roof access or ceiling voids
- Tell us about site rules, permits or sign-in
Get a fixed quote
Want a quote for TR19 inspection? Please give us a ring on 0345 646 2711 or drop us a line with a few details about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Related advice
What affects the quote in Lyford
Some jobs are bigger than they look, and some smaller. The main factors:
- One-off work versus a regular cycle
- The number of sites or systems
- When the work can happen, such as evenings, overnight or weekends
- Site rules, permits and inductions
Working hours, access and the scale of the site all affect the cost. Each of those is built into the quote and give you a fixed price before we start.
Helping us quote
We can often survey from pictures. Try to include:
- A few general shots of the system
- The postcode and the type of business
- Problems your staff have spotted
- The paperwork from the last visit, if you have it
Getting a quote does not take long. Call or email with a few details and you will normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Honest limits
TR19 inspection can’t fix everything, and we’d rather say so up front. It will not put right:
- Hidden runs that need access panels first
- The grease itself, which needs a full or spot clean
- Fan breakdowns, which need a repair visit
If you’re not sure, just ring 0345 646 2711 or email us and we will give you a straight answer before booking.
Parts of the system we cover
- Pre-clean surveys
- Wet film thickness tests
- Post-clean checks
- Access surveys
- Insurer audits
- Deposit thickness tests
Towns and villages near Lyford
Also in Lyford
FAQs for Lyford
Can you come to Lyford after we close?
Yes, nights and weekends are routine for us. It means the site in Lyford keeps running as normal. Tell us your opening hours when you ask for a quote.
Do you work in villages like Lyford?
Yes. Lyford is within the area we cover across London and the South East. A survey first, from pictures or a visit, means we arrive with the right kit.
Is a quote from pictures possible?
Yes, for many jobs. Send wide shots, close-ups of any access panels and anything that worries you, and a fixed quote typically follows within one working day. If photos aren’t enough, we will survey first.
What grease levels does TR19 allow?
TR19® Grease says grease should not go over a mean of 200 microns between cleans. 500 microns or more at any point calls for immediate spot cleaning.
What does TR19 inspection cost?
It depends on the site, so we quote each one individually. For a quote, give us a ring on 0345 646 2711 or send us an email and tell us about the site and its opening hours.
What do you do to protect the area?
Floors and surfaces near the work are sheeted before work begins, and anything we remove is contained. At the end, the area is cleaned down.
Do you check other contractors’ cleans?
A post-clean check records grease readings and photos after the work, for our cleans and other firms’ alike.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Multi-site and managed buildings
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.