Oxfordshire · TR19 inspections and grease testing

Hinton Waldrist TR19 inspection

Specialist TR19 inspection for Hinton Waldrist: diagnosis first, then a fixed quote, the work and a report with pictures. Call for a fixed quote.

  • Cleaning intervals that may not suit the kitchen
  • Ductwork where grease may be over the TR19 limits
  • Insurance renewals needing proof of TR19 cleaning

TR19 inspection in Hinton Waldrist

TR19 inspection in Hinton Waldrist, done properly

TR19® Grease says grease should not exceed a mean of 200 microns between cleans, and 500 microns or more at any point needs immediate spot cleaning. Testing is how you know where your system stands. If you are dealing with cleaning intervals that may not suit the kitchen and missing access panels found on survey, we can help.

In a small place like Hinton Waldrist, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. Access, parking and timings are agreed before the day.

Duct Doctor has been trading since 2009, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.

Location
Hinton Waldrist (SN7)
Wider area
Oxfordshire
Reporting
Certificate plus before-and-after photos
Quotes
A fixed price before any work starts
When we work
Out of hours as standard, 24/7 emergency line
Phone
0345 646 2711
Reviewed
30 October 2026
Five Duct Doctor technicians in navy uniforms with the company vans

Different parts, different methods

Schools, hospitals and care homes

School and college kitchens still need their extract checked. Readings show if the interval is right.

Restaurants, pubs and hotels

We test between services, early in the morning or after close so the kitchen keeps cooking.

What affects the quote in Hinton Waldrist

There’s no set price list, because sites vary so much. The quote depends on:

  • The times the site is available
  • Site rules, permits and inductions
  • Parking and loading at the site
  • The size of the system

Working hours, access and the scale of the site can all change the price. We take each of them into account, and the price is fixed before any work starts.

What we need to know

What to send for a quote:

  • The times we could work without disrupting the site
  • Where the plant sits or the system leaves the building, such as a roof or outside wall
  • Anything you’ve noticed, such as smells, noise, drips or poor airflow
  • Where the site is and what kind of site it is

There’s no standard price list, because no two systems are the same. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, call us on 0345 646 2711 or use the quote form.

Hinton Waldrist: your questions answered

Do you work at weekends in Hinton Waldrist?

Yes, we can come after you close and finish before you open. The work in Hinton Waldrist can fit around your hours. Let us know the hours you are closed and we’ll book within them.

Do you cover smaller places like Hinton Waldrist?

Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.

How do you keep the site clean during the work?

Floors and surfaces near the work are sheeted before we start, and anything we remove is contained. Before we leave, we tidy up and clean down.

How much does TR19 inspection cost in Hinton Waldrist?

Every site is different, so each gets its own fixed quote. To get one, call 0345 646 2711 or email us with the site type, opening hours and a few pictures.

Do you carry out TR19 audits for insurers?

Yes. Many insurers ask for proof of TR19 cleaning and inspection, and an audit report gives you that, along with any actions needed.

What should I send you?

Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and any previous paperwork make it quicker. Then call 0345 646 2711 or send us an email.

What is TR19?

TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.

How do you measure grease in a kitchen extract?

We measure the grease at set points with a WFTT or DTT test, then compare them with the TR19® Grease figures.

Aftercare tips

Here’s the after-treatment advice, in brief:

  • Keep grease filters clean and fitted properly
  • Keep access panels clear and unpainted
  • Look out for grease drips round the canopy edge
  • Share inspection reports with your insurer or broker when asked

The audit report is set out to pass straight to your insurer or broker, including readings, pictures and any inaccessible sections.

Keep filters clean and in place. Missing or damaged filters let grease straight into the plenum.

The process

We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes a morning or less for one kitchen, more where there are several systems. A quick note on how to find the site and where to park makes a visit to Hinton Waldrist run smoothly.

  1. Post-clean verification is booked once the clean is done.
  2. We open the access points used on the clean.
  3. We repeat the WFTT or DTT readings.
  4. We photograph each area to record how it was left.
  5. We report the findings and flag any areas that need more work.

Before we arrive

  • Agree a time when the area can be out of use
  • Dig out any earlier paperwork for the system
  • Make sure equipment near the work can be switched off and left to cool

Getting a quote

To help us quote: where the site is, what it is and its opening hours, photos of the system and the last certificate or report, if there is one. Then call us on 0345 646 2711, or send details by email.

Ask for a quote

Advice

Hinton Waldrist kitchens: local notes

Food Standards Agency data counts about 3 cafés, restaurants and staff canteens within about 1.5 miles of central Hinton Waldrist. A WFTT or DTT reading tells each of those kitchens whether its grease is staying under the 200-micron mean. Food hygiene inspections in Hinton Waldrist are the job of Vale of White Horse council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after photos from each clean are a simple way to show the extract is in hand. Hinton Waldrist sits within the area of Oxfordshire Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.

If you run a church or community hall kitchen, near Church of St Margaret or elsewhere in Hinton Waldrist, its extract still collects grease from every lunch and event. Longworth House, about 0.4 miles north-east, is one of the historic houses near Hinton Waldrist; if you run event catering at a venue like that, cleans can be booked between functions. If you run catering at a healthcare site, such as a hospital like Longworth Hospital about 5.9 miles west, the extract may need cleaning more often than a part-time kitchen.

Hinton Waldrist is about 7 miles north of Wantage, in Oxfordshire. Hinton Waldrist gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. Hinton Waldrist is one of 443 places in Oxfordshire where we work for commercial clients. We also work in Oxford, about 10 miles from Hinton Waldrist.

We work across the SN7 postcode area for TR19 inspection and the streets around it. Whether your site is on High Street, Church Road and Priors Lane or a nearby road, our technicians can take on the work. Other places close to Hinton Waldrist include Longworth (1 mile east), Kingston Bagpuize (2 miles east), Pusey (2 miles south-west), Charney Bassett (3 miles south) and Lyford (3 miles south). Within a short drive, we also cover Oxford (10 miles north-east), Didcot (10 miles south-east), Abingdon-on-Thames (7 miles east), Witney (7 miles north), Carterton (8 miles north-west) and Wantage (7 miles south).

Near you in Hinton Waldrist

Around Hinton Waldrist, our work takes us to kitchens and buildings near Lamb And Flag Public House. A little further out are Longworth Hospital (5.9 miles west) and Hinton Waldrist Castle (less than half a mile north-west). Green spaces nearby include Hitchcopse Pit.

Map of Hinton Waldrist © OpenStreetMap contributors

When something else is needed

Some problems need a different service or another trade:

  • Ductwork that was designed or installed badly
  • Sections with no access, until panels are fitted
  • The legal duty, which stays with the responsible person

If in doubt, phone us on 0345 646 2711 or email us and we’ll say what we think before you book.

What the work covers

  • Pre-clean surveys
  • Wet film thickness tests
  • Deposit thickness tests
  • Insurer audits
  • Post-clean checks
  • Access surveys

Why it’s worth doing now in Hinton Waldrist

A pre-clean survey avoids surprises on the night. Missing access panels, hidden duct runs and awkward fans are found before the cleaners arrive, so the clean covers the whole system. Somewhere as small as Hinton Waldrist, losing a kitchen or building to a fault is felt by everyone who uses it.

Combining work into one visit or one programme often makes better use of the time. Tell us about everything you’d like looked at and we will price it together.

Why us?

  • CHAS and SafeContractor accredited, with ISO 9001
  • Every visit written up, with photos
  • Full insurance on every job
  • A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease

Take a look at what affects the cost and how to check a contractor.

Staff cleaning versus specialist work

If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.

In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London