Slough · TR19 inspections and grease testing
Fulmer TR19 inspection
Looking for TR19 inspection in Fulmer? We diagnose first, fix the price and book the work around your hours, finishing with a written report and photos.
- Systems that need surveying before cleaning
- Extracts that have never been grease tested
- Sites with gaps in their extract records
TR19 inspection in Fulmer
A pre-clean survey looks at the whole system, from canopy to discharge. We check where the access panels are and whether every section can be reached, and record grease readings at set points. The work covers access surveys, post-clean checks and wet film thickness tests, and common reasons people get in touch are extracts that may be over the 200 micron mean and missing access panels found on survey.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. We agree access and timings in advance.
Good records are part of the job. Each visit is written up with photos, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Location
- Fulmer (SL3)
- Wider area
- Slough
- Reporting
- TR19® certificate and photo report
- Price
- Fixed quote, normally within a working day
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
TR19 inspection around Fulmer
The FSA’s data shows about 5 pubs, bars and clubs registered in Fulmer and the streets around it, up to about 1.5 miles out. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. Royal Berkshire Fire and Rescue Service covers Fulmer. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. In Fulmer, food businesses are inspected by environmental health officers from Buckinghamshire council. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Wexham Park Hospital is the nearest hospital to Fulmer, about 2.2 miles south. Where a hall near Church of St James, or anywhere in Fulmer, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Fulmer is about 4 miles north-east of Slough, in Slough. Whatever kind of site you run in Fulmer, we can take on TR19 inspection. Visits can be booked for evenings, overnight or weekends so the site keeps running. Across Slough, we cover 31 places, Fulmer among them. There’s also a page for London, about 20 miles away.
TR19 inspection in SL3 follows the same survey, fixed quote and written report as everywhere else we cover. You will find streets such as Fulmer Road, Alderbourne Lane and Hay Lane, and we cover them all for TR19 inspection. We also cover Tatling End (1 mile north-east), Wexham Street (1 mile south-west), Gerrards Cross (1 mile north), Stoke Poges (2 miles south-west) and Rush Green (2 miles east). Further out, we also cover Slough (4 miles south-west), Cippenham (5 miles south-west), Chalvey (4 miles south-west), Britwell (3 miles south-west), Langley (4 miles south) and Upton (4 miles south).
Near you in Fulmer
In Fulmer, that means kitchens and buildings near Bulstrode Park, The Black Horse Public House and Khalsa Secondary Academy, among other places. The nearest railway station is Gerrards Cross station, about 1.9 miles north. Nearby you’ll also find British Airways Heritage Collection (3.5 miles south-east) and Wexham Park Hospital (2.2 miles south). For a walk, there’s Horse Shoe Bay and Stoke Common.
What else we do in Fulmer
Fulmer questions
Which fire and rescue service is responsible for Fulmer?
Royal Berkshire Fire and Rescue Service is the fire and rescue service for Fulmer. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Can you clean school kitchen extracts in Fulmer during the holidays?
Yes. Half-terms and the summer break are the natural time for school work. The FSA’s register shows about 7 schools and colleges with food registrations within roughly a mile and a half of Fulmer. You can give us a ring on 0345 646 2711, or send details by email with the dates the site is empty.
How often should a kitchen extract be inspected?
Often enough to know the mean stays under 200 microns between cleans. If readings rise, the interval should shorten.
What’s TR19?
A BESA specification in two main parts: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t law, but it’s the benchmark.
Is Fulmer in your area?
Yes. We cover Fulmer and across Slough, as part of our work across South East England and London. To book, phone us on 0345 646 2711 or send us an email.
What do you do to protect the area?
With sheeting and covers, before anything else happens. We keep the work contained and leave the area clean.
Can you price the work without visiting?
Yes, if we can see what we need. If not, a site survey comes first, then a fixed quote.
How much does TR19 inspection cost in Fulmer?
Size, condition, access and working hours all affect the cost. Call for a fixed quote, typically ready within one working day.
Why it’s worth doing now in Fulmer
Don’t wait for an EHO visit or insurance renewal to find gaps in your extract records. A recent inspection report means you are ready when asked. A fault that closes a site in a village like Fulmer affects everyone who depends on it.
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before we start.
What you get with us
- Accredited under CHAS and SafeContractor, with ISO 9001
- Survey first, then a fixed quote
- Full insurance on every job
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at what affects the cost or our accreditations.
Common problems we fix in Fulmer
Grease is fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Knowing how much there is lets you act before it becomes a hazard.
The symptoms we’re asked about most include:
- Kitchens whose menu or hours have changed
- Sections of duct that can’t be reached
- Systems cleaned on a calendar with no measurements
- Sites with gaps in their extract records
School kitchens, at schools like Fulmer Infant School for example, are normally cleaned in the holidays so no lunches are lost.
What to look for in a quote
- If they look at the system before pricing
- Proof of insurance
- Whether the price is fixed
- How VAT is shown on the quote
How the visit works
When we arrive, we check the system against the survey or the pictures you sent. If anything is different, we talk it through with the person on site before carrying on. From there, it takes around an hour or two per canopy and duct system. We agree a date with you, plan the drive to Fulmer and turn up when the site is quiet.
- Post-clean verification is booked once the clean is done.
- We open the access points used on the clean.
- Grease readings are taken again at set points.
- Photos are taken to show the condition after the clean.
- We report the findings and flag any areas that need more work.
Getting ready for the visit
- Dig out any earlier paperwork for the system
- Tell us the best time to work, such as after service or at a weekend
- Move anything stored near the system
Getting a quote
Getting a quote doesn’t take long. Send a few details and photos, and we normally reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Related advice
Part by part
Extract fan and discharge
The discharge at the end of the system is checked as well, since grease reaches the very end of the system.
Vertical risers
In buildings with several floors, the riser may pass through other tenants’ space, so we arrange access ahead of time.
Honest limits
Some problems need a different service or another trade:
- Ductwork that was designed or installed badly
- Heavy deposits found on test, which still need cleaning
- Mechanical faults in the extract
If in doubt, phone us on 0345 646 2711, or send details by email and we’ll say what we think.
Where we work
- Pre-clean surveys
- Post-clean checks
- Access surveys
- Wet film thickness tests
- Deposit thickness tests
- Insurer audits
What affects the quote in Fulmer
The diagnosis comes before the price. We look at:
- How big the system is
- Whether several sites go on one quote
- A single visit or a regular plan
- Where the site is and how we reach it
We don’t list prices on the website, because the cost depends on the site in front of us. Call for a fixed quote, and we’ll talk you through it.
Helping us quote
You don’t need the technical terms. Just send:
- Any access panels or hatches you can see
- When the site is open and when it’s quiet
- A few general shots of the system
- How we’d reach plant on a roof or in a plant room
If you need TR19 inspection in Fulmer, give us a ring on 0345 646 2711, or email photos. Let us know the site type and the opening hours, and send photos or your last report if you can. A fixed quote typically follows within one working day.
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.