Kent · TR19 inspections and grease testing
TR19 Inspection in Bogle
One call covers TR19 inspections and grease testing in Bogle: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Pre-clean surveys before a first TR19 clean
- Uncertainty over how often to clean
- Parts of the system left out of past cleans
Leave it or put it right?
Sites in Bogle that have never measured grease can’t tell whether their cleaning interval suits the kitchen. Measured readings let a competent person set the interval. Planning a trip to Bogle ahead is easier for everyone than a rushed one.
Putting the work off seldom saves money. Problems in a system tend to grow, and a neglected system can mean more work. If you are unsure, phone us on 0345 646 2711, or send details by email for straight advice and a fixed quote.
What you get with us
- Survey first, then a fixed quote
- Fully insured
- Work around your opening hours, with 24/7 emergency cover
- One contact for all your sites in London and the South East
TR19 inspection in Bogle
Post-clean verification is a check carried out once the cleaning is done, with new readings and pictures of the cleaned areas. It gives you evidence of how the system was actually left. If you have checking the result of a recent clean and uncertainty over how often to clean, we can put it right.
In a small place like Bogle, kitchens are often in older or extended buildings, with long single-storey duct runs, where grease settles in the flat sections. We agree access and timings in advance.
Each visit ends with a written report and photos, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Location
- Bogle (ME9)
- Region
- Kent
- Records
- Certificate and photo report
- Quotes
- Fixed quote, normally within a working day
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Staff cleaning versus specialist work
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
FAQs for Bogle
Do you cover smaller places like Bogle?
Yes. Bogle is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
Which council inspects kitchens in Bogle?
In Bogle, it’s Swale council that carries out food hygiene inspections. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Do you carry out TR19 audits for insurers?
Yes. Our TR19 audits cover readings, photos, access and a recommended cleaning interval. You can pass it straight to your insurer or broker.
Do you offer emergency callouts?
Yes. Our emergency line runs 24/7, for problems that cannot wait. Ring any time and tell us what’s happened.
What if parts of the system can’t be reached?
They’re marked on the report. Often the fix is extra access, such as new panels in ductwork, and we can fit those.
How do you measure grease in a kitchen extract?
WFTT and DTT are the two methods for measuring grease thickness, in microns. We take readings at set points from canopy to fan.
What do the grease readings need to be?
The TR19® Grease figures are a mean of 200 microns or less between cleans, and immediate spot cleaning wherever a reading hits 500 microns. Our report sets your readings against both.
Do you survey before quoting?
Yes. We always survey first, from your photos and details, or with a visit where needed. Then you get a fixed quote.
What we are called out for in Bogle
Grease is fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Measuring it is the first step to keeping it under control.
Any of these means the system needs a check-up:
- Surveys needed before quoting a full clean
- Insurers asking for TR19 evidence
- Uncertainty over how often to clean
- Missing access panels found on survey
Term dates shape school work: for a school like Lynsted and Norton Primary School, an extract clean fits neatly into a half-term or summer break.
Comparing quotes
- How they set the interval to the next visit
- If they look at the system before pricing
- Proof of accreditation you can verify
- Whether the quote shows VAT
TR19 inspection in Bogle: the local picture
At about 3 miles from the coast, Bogle is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. Food Standards Agency records include about 4 pubs and bars within 1.5 miles or so of the middle of Bogle. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. The fire and rescue service for Bogle is Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
If your kitchen is in a listed or historic building, like the houses around Bogle (Belmont House and Gardens is about 4 miles south-east), fitting access panels needs care. Volunteers running a hall kitchen near Church of St Peter and St Paul, or anywhere in Bogle, may not know when the extract was last cleaned, and a grease test settles it.
Bogle is about 3 miles south-east of Sittingbourne, in Kent. Bogle gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where needed and a written report with photos. Bogle is one of 922 towns, villages and districts in Kent we cover for commercial clients. There’s also a page for Maidstone, roughly 12 miles from Bogle.
Work in ME9 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on Lynsted Lane and Bogle Road or a nearby road, our technicians can take on the work. We also cover the places around Bogle: Lynsted (1 mile south-west), Radfield (1 mile north-west), Bapchild (1 mile west), Rodmersham (1 mile west) and Erriottwood (1 mile south). We also work in nearby towns such as Maidstone (12 miles west), Ashford (13 miles south), Canterbury (13 miles east), Sittingbourne (3 miles north-west), Whitstable (11 miles east) and Faversham (4 miles east).
What’s near Bogle
Locally, jobs take us to businesses close to Sittingbourne Community College and Black Lion Public House, among other places. For rail, the closest station is Teynham station, roughly 1.1 miles north-east. Nearby you will also find Newnham Castle (2.3 miles south) and Sittingbourne Heritage Museum (2.6 miles north-west).
When something else is needed
Not every problem is solved by TR19 inspection, and we’d rather say so up front. It doesn’t solve:
- Design faults in the extract system
- Removing the grease, which is a separate clean
- Fan breakdowns, which need a repair visit
If you are not sure, just call 0345 646 2711 or email us and we’ll give you a straight answer.
What we work on in Bogle
- Pre-clean surveys
- Post-clean checks
- Deposit thickness tests
- Access surveys
- Insurer audits
- Wet film thickness tests
Nearby places to Bogle
More services for Bogle
What affects the cost of TR19 inspection
Before we fix a price, we need to know a few things. We check:
- The scale of the work
- When the work can happen, such as evenings, overnight or weekends
- Whether several sites go on one quote
- The condition we find in the survey
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.
What we need to know
What to send for a quote:
- Any previous report or certificate
- The roof, plant room or outside wall the system runs to
- The times we could work without disrupting the site
- Wide photos of the system and the area around it
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, call us on 0345 646 2711, or email photos.
What happens on the day
Every visit runs to the same pattern: sheeting and protection first, isolate whatever needs isolating, do the work, tidy up and hand over the paperwork. On site, the work takes around an hour or two per canopy and duct system. A few photos of the system help us make the most of a visit to a place like Bogle.
- First we look at the system’s cleaning history, if there is one.
- We follow the extract from canopy to discharge.
- We note where access panels are and where more are needed.
- We measure the grease and photograph each point.
- You get a report and a fixed quote for the clean.
How to prepare
- Let us know how we reach the system, including roofs, risers and plant rooms
- Tell us the best time to work, such as after service or at a weekend
- Make sure equipment near the work can be switched off and left to cool
Getting a quote
Need a price for TR19 inspection? Please call 0345 646 2711 or use the quote form with a few details about the site. We’ll explain what we’d do and send a fixed quote before anything is booked.
Related advice
Aftercare tips
Looking after the system between visits is straightforward, and it helps at the next visit:
- Keep TR19 certificates, readings and reports together
- Wipe the canopy surfaces regularly
- Clean or swap grease filters as often as the kitchen needs
- Send TR19 audit reports to your insurer on request
Each report suggests the next clean and the next test, from the measured grease and the kitchen’s hours.
Keep all TR19 records together so the history is easy to show.