Kent · Extract fan cleaning
Bogle extract fan cleaning
Professional extract fan cleaning in and around Bogle, timed so the site keeps working and signed off in writing with pictures.
- Thick grease on the impeller and casing
- Hot, greasy smells near the fan
- Grease escaping from the fan outlet
Extract fan cleaning in Bogle
In Bogle, as everywhere we work, the fan follows a set routine: isolated first, then opened, scraped and degreased. The result is photographed for your records. If you have less air being pulled from the kitchen and an extract fan that vibrates or rattles, we can help.
Work in a small place like Bogle starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
The report is your system’s health record: dated, with photos, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Place
- Bogle (ME9)
- Wider area
- Kent
- Reporting
- TR19® certificate and photo report
- Quote
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Do you need extract fan cleaning in Bogle?
Each blade collects a slightly different amount. The difference throws the impeller off balance and puts strain on the bearings. Left too long, grease turns into wear.
Signs it’s time to call us include:
- A fan that no longer moves enough air
- A fan coated in grease inside its housing
- A fan left out of previous cleans
- A fan that hums, whines or rumbles
Belmont House and Gardens, about 4 miles south-east, is one of the historic houses near Bogle; if you run event catering at a venue like that, cleans can be booked between functions.
What to look for in a quote
- Whether a survey comes first
- Exactly which parts of the system are covered
- If the quote is a fixed price or an estimate
- What hours they’ll be on site
Between visits
Good habits slow the build-up between visits. A few tips:
- Make sure the fan is included each time
- Watch for grease marks around the outlet
- Note any drop in extraction at the canopy
- Listen for new noises or vibration from the fan
When we have finished, the fan is reassembled and run. Anything we notice, like noise, vibration or a worn part, goes on the report, so you can plan any repair.
A change in how the fan sounds is worth noting. Rattles, hums or shaking can be early signs of build-up or wear, and catching it early keeps it a cleaning job.
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
For landlords and multi-site operators
Whether it’s one building or many, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we are happy to quote for all of it.
Extract fan cleaning around Bogle
Sea air reaches Bogle, which sits within about 3 miles of the coast. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. The Food Standards Agency lists about 4 pubs and bars as registered food businesses across Bogle and its immediate surroundings (about a mile and a half). Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Food hygiene inspections in Bogle are the job of Swale council’s environmental health team. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready.
Bursars and site managers at schools such as Lynsted and Norton Primary School tend to book extract cleaning for when the kitchen is empty. Volunteers running a hall kitchen near Church of St Peter and St Paul, or anywhere in Bogle, may not know when the extract was last cleaned, and a grease test settles it.
Bogle is about 3 miles south-east of Sittingbourne, in Kent. Bogle gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. We cover 922 places across Kent, large and small. We also work in Maidstone, about 12 miles from Bogle.
Extract fan cleaning in ME9 is surveyed, quoted and booked the same way as anywhere else. Streets in the area include Lynsted Lane and Bogle Road, and we cover them all for extract fan cleaning. Other places close to Bogle include Lynsted (1 mile south-west), Radfield (1 mile north-west), Bapchild (1 mile west), Rodmersham (1 mile west) and Erriottwood (1 mile south). Larger places within reach include Maidstone (12 miles west), Ashford (13 miles south), Canterbury (13 miles east), Sittingbourne (3 miles north-west), Whitstable (11 miles east) and Faversham (4 miles east).
Around Bogle
In Bogle, that means kitchens and buildings near Sittingbourne Community College and Black Lion Public House, among other places. The nearest railway station is Teynham station, roughly 1.1 miles north-east of the centre. Well-known places in the area include Newnham Castle (2.3 miles south) and Sittingbourne Heritage Museum (2.6 miles north-west).
Towns and villages near Bogle
Also in Bogle
The process
We are used to working while the site is closed. A lot of visits happen overnight or at weekends, so a kitchen or building can carry on as usual the next day. On site, the work takes a couple of hours per fan, depending on its size and the build-up. Somewhere like Bogle, lanes, gates and parking are worth mentioning in advance.
- We start by checking where the fan sits and how to isolate it.
- With the fan isolated, the housing is opened.
- Grease is scraped from the impeller blades and the inside of the housing.
- Blades, housing and the area around the motor are degreased with care.
- We reassemble, run the fan and photograph the result.
Before we arrive
- Make sure someone can let us in and lock up afterwards
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Agree a time when the area can be out of use
Get a fixed quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Advice
When something else is needed
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- A fan that is too small for the system (a design question)
- A motor that has burnt out
- Wiring faults to the fan
If in doubt, ring 0345 646 2711 or use the quote form and we’ll say what we think before you book.
Where we work
- Discharge points
- Centrifugal fans
- Fan housings
- Axial fans
- Roof-mounted fans
- In-line fans
Bogle: your questions answered
Who enforces fire safety at workplaces in Bogle?
Fire safety enforcement in Bogle is handled by Kent Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Does the sea air around Bogle make a difference to extract fan cleaning?
It can. Bogle is within about 3 miles of the coast, and salt air speeds up corrosion. Outdoor metalwork near the sea is worth inspecting at each visit.
Is it safe to clean the fan while the kitchen is open?
We isolate the fan, so the kitchen cannot cook while we work. We work evenings, overnight or weekends, and the kitchen is ready when we leave.
How long is a fan clean?
Size, access and build-up all affect it. As a guide, it takes a couple of hours per fan, depending on its size and the build-up.
Which kinds of sites do you work on?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
What paperwork do I get after a fan clean?
A photo report shows the fan before and after. Full system cleans come with a TR19 certificate as well.
Is TR19 cleaning required by law?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
What happens to the waste?
It’s contained and taken away. We collect grease, debris and waste water as we go rather than letting it spread.
Why it’s worth doing now in Bogle
Vibration from an unbalanced impeller doesn’t stay small. It can wear the bearings and lead to failure, which may leave the kitchen without extraction. Cleaning it early is far less disruptive. With notice, the visit to Bogle can be fitted around your bookings and events.
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re unsure, phone us on 0345 646 2711 or drop us a line and we’ll give you an honest view and a fixed quote.
Why us?
- Every visit written up, with photos
- Every job surveyed first
- Fixed quotes from a survey or pictures
- Work around your opening hours, with 24/7 emergency cover
Take a look at our cost guide or our accreditations and certificates.