Kent · TR19 inspections and grease testing

TR19 Inspection in Bexon

Need TR19 inspection in Bexon? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and photos.

  • Heavy grease suspected in the plenum or ducts
  • Parts of the system left out of past cleans
  • Confirming a clean reached the whole system

Book TR19 inspection in Bexon

How we handle TR19 inspection in Bexon

Grease thickness testing tells you how much grease is sitting in the canopy, ducts and fan. Readings are taken at set points using the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT). The results show whether the system needs cleaning and how soon. The work covers access surveys, insurer audits and deposit thickness tests, and common reasons people get in touch are cleaning intervals that may not suit the kitchen and extracts that may be over the 200 micron mean.

For a kitchen in or near Bexon, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.

Good records are part of the job. Each visit is written up with photos, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.

Extract duct interior shown dirty and then cleaned back to bare metal
Location
Bexon (ME9)
Wider area
Kent
Records
TR19® certificate and photo report
Quotes
A fixed price before work begins
Working hours
Evenings, overnight and weekends; 24/7 emergencies
Telephone
0345 646 2711
Updated
30 October 2026

For landlords and multi-site operators

Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side, and the report can go to both.

We regularly work with managing agents. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.

How the job changes from site to site

Extract fan and discharge

The extract fan and its housing collect grease too. They’re included in the readings and photos.

Schools, hospitals and care homes

We fit testing around service times and school holidays so meals are not affected.

Kitchen extracts in Bexon

Food Standards Agency data counts about 4 cafés, restaurants and staff canteens within 1.5 miles or so of the middle of Bexon. Each kitchen extract among them can be measured for grease to set the right cleaning interval. It’s Swale council that sends environmental health officers to food businesses in Bexon. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. A dated certificate in the maintenance file answers the question before it’s asked. The fire and rescue service for Bexon is Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.

Bursars and site managers at schools such as Bredgar Church of England Primary School tend to book extract cleaning for when the kitchen is empty.

Bexon is about 3 miles south of Sittingbourne, in Kent. Whatever kind of site you run in Bexon, TR19 inspection is something we can help with. We can work out of hours so the site keeps running. Bexon is one of 922 places in Kent where we work for TR19 inspection. There’s also a page for Maidstone, about 8 miles away.

All of ME9 is within our area for TR19 inspection, from busy streets to back roads. We also cover Tunstall (1 mile north), Dungate (2 miles east), Highsted (2 miles north-east), Heart's Delight (2 miles north) and Rodmersham Green (2 miles north-east). Larger places within reach include Maidstone (8 miles west), Ashford (13 miles south-east), Sittingbourne (3 miles north), Whitstable (14 miles east), Faversham (8 miles east) and Minster (9 miles north-east).

Around Bexon

Typical jobs here are in premises near Cromers Wood and Fulston Manor School. For rail, the closest station is Sittingbourne station, roughly 2.9 miles north. Other landmarks nearby include Sittingbourne Heritage Museum (2.8 miles north-east) and Bayford Court (3.1 miles north-east).

Map of Bexon © OpenStreetMap contributors

In-house cleaning or a specialist?

Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.

Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.

Common problems we fix in Bexon

Some parts of a system are hard to reach, so those sections can be skipped time and again. An inspection of a system in Bexon shows where access panels are missing, so the gaps can be closed.

Look out for any of the following:

  • Missing access panels found on survey
  • Kitchens whose menu or hours have changed
  • Systems cleaned on a calendar with no measurements
  • Heavy grease suspected in the plenum or ducts

Church and community hall kitchens, near Church of St John the Baptist or anywhere around Bexon, are easy to forget, but their extracts collect grease like any other.

What your quote should include

  • When they can work, and whether that’s outside your opening hours
  • Whether the figure could change on the day
  • Which accreditations they hold, and whether you can check them
  • Whether a survey comes first

Our hiring checklist

What we do, step by step

A visit follows the same order every time: protect the area, isolate whatever needs isolating, carry out the TR19 inspection, tidy up and hand over the paperwork. On site, the work takes an hour or two for a single kitchen, longer for a large or complex system. If you can send photos, we can arrive in Bexon knowing what to expect.

  1. We agree a time when the kitchen is closed or quiet.
  2. Every part of the system is examined, end to end.
  3. Grease readings are taken at set points using WFTT or DTT.
  4. Each test point and any access problems are photographed.
  5. You get a report with readings, pictures and recommendations.

How to prepare

  • Mention any parking or loading restrictions
  • Arrange a key holder or contact on site
  • Let us know about permits to work or site inductions

Ask for a quote

Here’s what helps us quote: where the site is, what it is and its opening hours, a few photos and the last certificate or report, if there is one. Then phone us on 0345 646 2711, or send details by email.

Get a quick quote

Advice

Keeping the system healthy

A little care between visits keeps the system in better shape. We recommend:

  • File every inspection report with your certificates
  • Flag oily drips near the extract
  • Book the next test on the date in the report
  • Never cook with filters missing

Where sections couldn’t be reached, the report says where access panels would help. Fitting them before the next clean means the whole system gets done.

Test grease regularly instead of relying on the calendar. It shows if build-up is speeding up.

FAQs for Bexon

Who enforces fire safety at workplaces in Bexon?

It’s Kent Fire and Rescue Service, which covers Bexon. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.

Can the work in Bexon be done at night or at weekends?

Yes, out-of-hours work is a big part of what we do. The work in Bexon can fit around your hours. Tell us your opening hours when you ask for a quote.

Do you work with multi-site operators?

Yes. One number covers all your sites across London and the South East, with visits on a regular schedule.

What should I send you?

Only a few details: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. After that, simply call 0345 646 2711 or email us.

How often should grease be tested?

Each report recommends when to test and clean next, taking the readings and the kitchen’s hours into account. The interval should come from a competent person’s risk assessment backed by grease measurement.

What does a pre-clean survey involve?

The survey covers the whole system, grease readings and access to each section. It lets us plan the clean and give you a fixed quote.

How much notice do you need?

The more notice, the better, particularly for night and weekend visits. We typically quote within one working day, and emergencies are covered by our 24/7 line.

Can you price the work without visiting?

Yes, if we can see what we need. If not, a site survey comes first, and the quote follows that.

Leave it or put it right?

An EHO visit, an insurance renewal or a fire risk assessment is a bad time to find your extract records are thin. An inspection now gives a site in Bexon a current picture. Out of sight is the usual reason a rural system goes too long without attention.

Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll explain each part.

Why book with us

  • Out-of-hours work and a 24/7 emergency line
  • Survey first, then a fixed quote
  • Full insurance on every job
  • BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease

See what affects the cost and our accreditations.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London