Hertfordshire · TR19 inspections and grease testing
TR19 inspections in Bennetts End
TR19 inspection for Bennetts End, with a survey first and a report with pictures at the end. Call for a fixed quote.
- Parts of the system left out of past cleans
- Kitchens taken over with no cleaning records
- Checking the result of a recent clean
What affects the cost of TR19 inspection
There’s no set price list, because sites vary so much. The quote depends on:
- Working hours and out-of-hours timing
- How big the system is
- One-off work versus a regular cycle
- The number of sites or systems
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will go through it with you.
Helping us quote
You do not need the technical terms. Just send:
- The site address and the type of premises
- Your opening hours and when the area is out of use
- Any access panels or hatches you can see
- A few general shots of the system
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
TR19 inspection in Bennetts End, done properly
A pre-clean survey is the diagnosis, and the clean is the treatment. Readings, pictures and notes on access are gathered from end to end, so the clean can be planned properly. The work covers deposit thickness tests, wet film thickness tests and access surveys, and people most often call us about sites with gaps in their extract records and confirming a clean reached the whole system.
Size does not change the work: a kitchen in a place like Bennetts End gets the whole system cleaned, canopy to discharge. We plan the visit around your hours, with the journey sorted in advance.
We have been trading since 2009, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Where
- Bennetts End (HP3, HP2)
- Region
- Hertfordshire
- Reporting
- Certificate and photo report
- Quotes
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Grease, kitchens and Bennetts End
The Food Standards Agency lists about 29 pubs, bars and clubs and about 4 hotels and guest houses as registered food businesses within 1.5 miles or so of the middle of Bennetts End. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Food hygiene inspections in Bennetts End are the job of Dacorum council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. A dated certificate in the maintenance file answers the question before it’s asked. Hertfordshire Fire and Rescue Service covers Bennetts End. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Healthcare kitchens, like those at hospitals such as Hemel Hempstead Hospital (about 1.1 miles north-west), often cook for long hours, which puts them in BESA’s heavier-use bands. A hall kitchen that only cooks for events, whether near Saint Benedict or elsewhere in Bennetts End, still needs its extract cleaned, just less often. A kitchen near Apsley station that serves breakfast and dinner can run its extract twelve hours or more, which shortens the cleaning interval.
Bennetts End is about 1 mile south-east of Hemel Hempstead, in Hertfordshire. We provide TR19 inspection for businesses, landlords and public buildings in Bennetts End and the rest of Hertfordshire. Bennetts End is one of 381 places in Hertfordshire where we work for TR19 inspection. You can also see our page for London, roughly 23 miles from Bennetts End.
Postcode districts we cover here for TR19 inspection: HP3 and HP2. We cover sites on Leys Road, Caro Lane and Howe Road and nearby roads. Nearby, we also carry out TR19 inspection in Nash Mills (1 mile south), Leverstock Green (1 mile north-east), Hemel Hempstead (1 mile north-west), Apsley (1 mile west) and Adeyfield (1 mile north). We also work in nearby towns such as Watford (6 miles south), St Albans (5 miles east), Welwyn Garden City (12 miles east), Harpenden (7 miles north-east), Hatfield (9 miles east) and Borehamwood (9 miles south-east).
Landmarks near Bennetts End
In Bennetts End, that means kitchens and buildings near Longdean School, Gadebridge Park and The Paper Mill pub and the streets around them. Bennetts End’s nearest station is Apsley station, roughly 0.9 miles south-west. Other landmarks nearby include Hemel Hempstead Hospital (1.1 miles north-west). The countryside around Bennetts End includes Long Deans and Verulamium Lake.
When something else is needed
We’d rather tell you now than book work that won’t help, so here are the limits:
- Ductwork that was designed or installed badly
- Fan breakdowns, which need a repair visit
- Heavy deposits found on test, which still need cleaning
Not sure which it is? You can phone us on 0345 646 2711 or drop us a line and we’ll tell you honestly.
Where we work
- Post-clean checks
- Access surveys
- Wet film thickness tests
- Deposit thickness tests
- Insurer audits
- Pre-clean surveys
Also near Bennetts End
Other services in Bennetts End
Why it’s worth doing now in Bennetts End
Surveying first means the clean goes to plan. Access problems are spotted in advance rather than on the night, so the clean covers the whole system. It’s better to plan the work at a site near Bennetts End than wait for a failure.
A single site or a whole portfolio, we price it on the same basis: the work involved, the access and the timing. The price is fixed before work begins.
Why us?
- We diagnose before we treat
- CHAS and SafeContractor accredited, with ISO 9001
- One number for every site across the South East and London
- A written report with photos after every visit
Read our cost guide and how to check a contractor.
Multi-site and managed buildings
If you look after several sites, we can schedule visits across all of them on one quote. Each site gets its own report and pictures, so records stay tidy.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
How it works
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes an hour or two for a single kitchen, longer for a large or complex system. Because the survey comes first, a visit to Bennetts End can usually be finished without a second trip.
- We agree a time when the kitchen is closed or quiet.
- The system is checked from canopy to discharge.
- Grease readings are taken at set points using WFTT or DTT.
- We photograph the test points and record any sections we can’t reach.
- You get a report with readings, pictures and recommendations.
Before we arrive
- Mention any sign-in, permit or induction we need
- Dig out any earlier paperwork for the system
- Let us know about parking and loading
Getting a quote
Want a quote for TR19 inspection? Please phone us on 0345 646 2711 or use the quote form with a few details about the site. We will talk you through the work and give you a fixed quote before anything is booked.
Read more
Part by part
Extract fan and discharge
The extract fan and its housing collect grease too. They’re included in the readings and photos.
Schools, hospitals and care homes
School and college kitchens still need their extract checked. Readings show if the interval is right.
Keeping the system healthy
After the visit, a few habits help the work last:
- Book the next test on the date in the report
- Keep TR19 certificates, readings and reports together
- Do not box in or cover duct access panels
- Never cook with filters missing
Keep the verification report next to the certificate it relates to. The pair gives a clear record of the clean and the check.
Regular grease readings keep the cleaning interval honest. It shows if build-up is speeding up.
FAQs for Bennetts End
Do you work overnight in Bennetts End?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Bennetts End needn’t be disturbed. Tell us your opening hours when you ask for a quote.
Is Bennetts End within the area you cover?
Yes. Bennetts End is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
What is a WFTT or DTT grease test?
The Wet Film Thickness Test (WFTT) and Deposit Thickness Test (DTT) measure how thick the grease is at a given point. Readings are taken at set points through the system.
What does a pre-clean survey involve?
It’s a look at the whole extract before it’s cleaned, with readings and photos. We can work from photos and details, or visit, as suits the job.
How much does TR19 inspection cost?
Every site is different, so each gets its own fixed quote. For a quote, ring 0345 646 2711, or send details by email with the site type, opening hours and a few photos.
Can you price the work without visiting?
Usually, yes. Send a few wide pictures plus close-ups of panels, filters or grilles, and a fixed quote typically follows within one working day. Some sites still need a visit, and we will say so.
What is TR19?
A BESA specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.
How much notice should we give?
That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.