Kent · Grease trap cleaning
Grease Trap Cleaning in Bilting
One call covers grease trap cleaning in Bilting, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- An inline trap or interceptor due for cleaning
- A full, neglected grease trap
- A routine grease trap service
Grease trap cleaning in Bilting
Once a trap is full, grease passes straight through. Further down the pipe, the grease cools and hardens, leading to slow drains, blockages and smells. A trap that is cleaned regularly keeps grease where it belongs. If you have a larger grease trap that needs emptying and foul odours from the grease trap, we can help.
In a village or hamlet like Bilting, commercial kitchens are few, perhaps a pub, a school or a care home. Wherever there is one, it needs its grease trap and hard-to-reach areas kept clean.
Think of the report as the system’s health record: a dated account with pictures of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Where
- Bilting (TN25)
- Wider area
- Kent
- Records
- Written report with photos
- Quotes
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Questions from Bilting
Who carries out food hygiene inspections in Bilting?
Kitchens in Bilting are inspected by Ashford council’s environmental health officers. Inspection results feed into the food hygiene rating published by the Food Standards Agency.
Can you work in Bilting outside opening hours?
Yes. We work evenings, overnight and at weekends. That way a site in Bilting does not have to lose a day’s trading. Just ring 0345 646 2711, or send details by email with your opening times and we’ll plan around them.
What problems does a full grease trap cause?
An overfull trap stops separating grease. Slow drains, bad smells and blockages follow.
What types of grease trap do you clean?
Under-sink units, inline traps and interceptors are all covered. Tell us what you have and we’ll plan the visit.
Do you offer emergency callouts?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
Is TR19 a legal requirement?
Not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurance policies ask for proof of TR19® cleaning. The law behind it is the Fire Safety Order 2005 in England and Wales.
What do you do with what you remove?
We take it away when we go. While we work, it’s kept contained so the area stays clean.
Do you cover Bilting?
Yes. Bilting is part of the area we cover, as part of our area across London and the South East.
What happens if it’s left?
Smells from a neglected trap are hard to ignore. Decomposing waste in the trap smells bad that can reach the kitchen and beyond. Cleaning it removes the cause. Our emergency line runs 24/7, but a planned visit to Bilting is calmer for everyone.
We don’t list prices on the website, because each job is priced on what it involves. For a fixed quote, call 0345 646 2711 or drop us a line, and we’ll explain what it covers.
What you get with us
- Every job surveyed first
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Ventilation hygiene specialists since 2009
- Fully insured
See how cleaning jobs are priced and how to check a contractor.
How we price grease trap cleaning
There’s no set price list, because no two systems are the same. What we look at:
- The scale of the work
- Whether it’s a one-off visit or part of a schedule
- How many systems or sites are involved
- Any permits to work or inductions
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote and give you a fixed price before work begins.
What to send for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Any previous report or certificate
- When the site is open and when it’s quiet
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Close-ups of filters, grilles, hatches or access panels
For a fixed quote, phone us on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. We usually come back within one working day.
Managing agents and facilities teams in Bilting
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we’ll come back with a fixed quote.
Records are where multi-site compliance often slips. Every visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
Nearby places to Bilting
What else we do in Bilting
Honest limits
We won’t sell you work that does not address the problem, so here are the limits:
- A leaking sink waste or trap connection
- Blockages further down the drainage network
- Drains that need jetting rather than trap cleaning
If in doubt, phone us on 0345 646 2711, or email photos and we will say what we think.
Parts of the system we cover
- School and care home kitchens
- Restaurants and takeaways
- Under-sink grease traps
- Kitchen waste pipes
- Inline grease traps
- Pot wash sinks
Different parts, different methods
School, care home and staff kitchens
Drains in care settings need to keep flowing. Visits are planned between meals.
Under-sink grease traps
Under-sink traps are compact units fitted below the kitchen sink. Their small size means they fill fast and need regular cleaning.
How the visit works
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. From there, it takes less than an hour for many under-sink units. We agree a date with you, plan the drive to Bilting and turn up when the site is quiet.
- First, we find the trap and look at its connections.
- Sinks feeding the trap are taken out of use.
- Grease and solids are removed from the trap.
- We clean every part of the inside.
- The trap is refitted, tested with water and the waste taken away.
Preparing for the visit
- Mention any sign-in, permit or induction we need
- Let us know about parking and loading
- Move anything stored near the system
Ask for a quote
For grease trap cleaning in Bilting, call us on 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. We typically send a fixed quote within one working day.
Read more
Staff cleaning versus specialist work
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
What grease trap cleaning looks like in Bilting
Kitchens in Bilting get their food hygiene inspections from Ashford council. They look at the cleanliness of the whole kitchen: walls, floors, ceilings and equipment. A record of each deep clean helps show the kitchen is kept in order. Bilting, about 49 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you.
If you run a church or community hall kitchen, near Church of St Lawrence or elsewhere in Bilting, a deep clean and an emptied grease trap before a busy season of events are worth booking. A summer deep clean suits schools such as Wye School, as the kitchen can be stripped back with no lunches to serve. William Harvey Hospital, about 4.8 miles south, is the nearest hospital to Bilting; healthcare kitchens can’t stop cooking, so deep cleans are worked around meal times.
Bilting is about 6 miles north-east of Ashford, in Kent. Wherever you are in the TN25 postcode area, we can take on grease trap cleaning. We cover 922 places across Kent, from busy centres to quieter spots. You can also see our page for Maidstone, about 18 miles away.
Work in TN25 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on Canterbury Road and Bilting Lane or anywhere close by, our technicians can take on the work. Neighbouring places we cover for grease trap cleaning include Godmersham (1 mile north-east), Mountain Street (2 miles north), Molash (2 miles north-west), Chilham (3 miles north-east) and Shottenden (3 miles north). We also work in nearby towns such as Ashford (6 miles south-west), Canterbury (8 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (11 miles north) and Faversham (8 miles north).
Near you in Bilting
Locally, jobs take us to businesses close to Godmersham Park. The closest station to Bilting is Wye station, about 1.7 miles south. Well-known places in the area include Tower keep castle at Chilham (2.5 miles north) and William Harvey Hospital (4.8 miles south).