Hertfordshire · Grease filter exchange
Grease filter exchange in Shillington, Hertfordshire
We cover Shillington for grease filter exchange. Fixed quotes, work around your opening hours and photo reports on every job.
- Gaps where filters have been removed
- Grease collecting in the filter channels
- Hand-washed filters that still look greasy
Questions from Shillington
Which fire service covers Shillington?
It’s Hertfordshire Fire and Rescue Service, which covers Shillington. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Who carries out food hygiene inspections in Shillington?
Kitchens in Shillington are inspected by Central Bedfordshire council’s environmental health officers. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
How regularly do grease filters need exchanging?
The right interval depends on the kitchen. If filters clog early, the interval needs shortening, and we can change it.
Can you give a price for filter changes?
We price it on the number of filters and the visit frequency. Send us details or photos and we will quote, usually within one working day.
What accreditations do you have?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We have been trading since 2009 and we’re fully insured.
Can we book visits on a schedule?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
Will I get paperwork for my records?
Yes. You get a written report with photos after every visit, covering the work, any areas we couldn’t access and the recommended next date. Kitchen extract cleans to TR19® Grease also get a certificate through the BESCA Vent Hygiene Elite portal.
Does the report say when we need you again?
Yes. Every report includes a recommended date for the next visit, based on use and what we found.
How we handle grease filter exchange in Shillington
A filter service works alongside TR19® cleaning, not instead of it. Fresh filters help limit what gets into the ductwork though vapour still carries some grease past them. So the canopy, plenum and ducts still need their full TR19 clean. The work covers restaurants and pubs, school and hospital kitchens and baffle filters, and common reasons people get in touch are filters left unwashed on busy weeks and smoke and heat lingering under the hood.
Somewhere as small as Shillington, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease.
A written report with photos follows each visit, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.

- Location
- Shillington (SG5)
- Wider area
- Hertfordshire
- Paperwork
- Report and photos after the visit
- Quote
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
What grease filter exchange looks like in Shillington
Environmental health officers from Central Bedfordshire council inspect food businesses in Shillington. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Hertfordshire Fire and Rescue Service covers Shillington. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Church and community hall kitchens, near Church of All Saints or anywhere around Shillington, are easy to forget, but their extracts collect grease like any other. A hospital like Fairfield Hospital, about 4.9 miles east, is the kind of site where a kitchen may cook for patients, staff and visitors all day. Term dates shape school work: for a school like Shillington Lower School, an extract clean fits neatly into a half-term or summer break.
Shillington is about 5 miles north-west of Hitchin, in Hertfordshire. Shillington gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. Shillington is one of 381 places in Hertfordshire we cover for commercial clients. You can also see our page for Milton Keynes, about 17 miles away.
Work in SG5 follows the same survey, fixed quote and written report as everywhere else we cover. If you need grease filter exchange at premises on Hillfoot Road, New Walk and Church View Avenue or anywhere close by, we can help. Neighbouring places we cover for grease filter exchange include Hanscombe End (1 mile west), Apsley End (1 mile south-west), Pirton (2 miles south-east), Hexton (3 miles south-west) and Pegsdon (3 miles south). We also work in nearby towns such as Stevenage (10 miles south-east), Welwyn Garden City (15 miles south-east), Harpenden (12 miles south), Hitchin (5 miles south-east), Letchworth (6 miles east) and Letchworth Garden City (6 miles east).
Around Shillington
Around Shillington, our work takes us to kitchens and buildings near The Five Bells Public House. The nearest railway station is Arlesey station, about 4.6 miles north-east of the centre. A little further out are Fairfield Hospital (4.9 miles east) and Stondon Motor Museum (2.1 miles east). Open spaces near Shillington include Cain Hill and Pegsdon Hills.
When something else is needed
We’d rather tell you now than book work that won’t help, so here are the limits:
- A canopy that needs a proper clean
- Extraction problems caused by the fan rather than the filters
- A canopy that doesn’t capture the vapour properly
If you are not sure, just call 0345 646 2711, or email photos and we’ll give you a straight answer.
Parts of the system we cover
- Island canopies
- Restaurants and pubs
- Wall canopies
- School and hospital kitchens
- Mesh filters
- Baffle filters
What happens on the day
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. The visit takes a few minutes per canopy, longer for a large kitchen with several canopies. Pictures of the system and its access let us plan the work in Shillington before we set off.
- We record the number, size and type of your filters.
- We set the interval with you.
- The dirty set is lifted out.
- A clean set is fitted and checked for gaps.
- We take the greasy set away and confirm the next date.
How to prepare
- Have your last certificate or report to hand
- Arrange a key holder or contact on site
- Let us know when the site is closed or quiet
How to get a quote
Quotes are quick. Send a few details and photos, and we normally reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Related advice
What happens if it’s left?
Once filters are saturated, more grease gets past them. That makes the next full clean a bigger job, and grease may build up faster than the cleaning interval allows. Planning a trip to Shillington ahead is easier for everyone than a rushed one.
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
What you get with us
- Accredited under CHAS and SafeContractor, with ISO 9001
- Survey first, then a fixed quote
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Every visit written up, with pictures
Read what affects the cost and our accreditations and certificates.
How we price grease filter exchange
A fixed price needs a few facts first. We check:
- What state the system is in
- The size of the system
- The number of sites or systems
- Site rules, permits and inductions
When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account, and the price is fixed before we start.
Helping us quote
What to send for a quote:
- The site address and the type of premises
- Any previous report or certificate
- Any symptoms, from odd noises to smells or leaks
- When the site is open and when it’s quiet
There’s no standard price list, because every site is different. We look at your system first, from pictures or on a visit, then send a fixed quote. To start, phone us on 0345 646 2711 or use the quote form.
Nearby places to Shillington
Other services in Shillington
What the work involves, part by part
Canopy filter housings
Filters sit in a housing or channel in the canopy. A damaged housing leaves gaps.
Busy restaurant and pub kitchens
Kitchens that fry and grill all day load their filters fast. Their exchange schedule is normally the tightest.
Managing agents and facilities teams in Shillington
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Keeping the system healthy
Here’s the after-treatment advice, in brief:
- Never leave gaps in the filter bank
- Make sure we can reach the canopy on exchange day
- Never cook with the extract switched off
- Keep filter exchange and TR19 cleaning on the same plan
We tell you if we spot anything in the canopy that needs attention. That might mean bringing a TR19® clean forward, and we can arrange it.
A kitchen that is getting busier needs its filters changed more often. Changing the interval early stops grease building up unseen in the ducts.