Kent · Grease filter exchange
Grease filter exchange in Breach, Kent
Grease filter exchange for Breach, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Filters left unwashed on busy weeks
- Smoke and heat lingering under the hood
- A canopy running with filters missing
Grease filter exchange in Breach
The filters in the canopy are the first thing cooking vapour meets. They catch grease before it reaches the plenum and ductwork and they do it best when they’re clean. With grease filter exchange, clean filters replace greasy ones at regular intervals. The work covers school and hospital kitchens, mesh filters and island canopies, and people most often call us about grease collecting in the filter channels and filters that leave gaps in the canopy.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
It’s worth checking any contractor’s accreditations. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Breach (CT4)
- Wider area
- Kent
- Paperwork
- Written report with photos
- Quote
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Questions from Breach
Do you work overnight in Breach?
Yes, nights and weekends are routine for us. The work in Breach can fit around your hours. Let us know the hours you are closed and we’ll book within them.
Which council inspects kitchens in Breach?
In Breach, it’s Canterbury City council that carries out food hygiene inspections. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t law, but it’s the benchmark.
How much notice should we give?
The more notice, the better, particularly for night and weekend visits. Quotes typically come back within one working day, and emergencies are covered by our 24/7 line.
Do you look at the system first?
Yes. Every job is surveyed first, either from photos and details you send or on a site visit. Then you get a fixed quote.
How often should grease filters be changed?
It varies from kitchen to kitchen. The schedule is based on how heavily you cook and can change if your kitchen gets busier.
Do you deal with bent or broken filters?
We check every filter at each visit. We tell you about any that are damaged, because gaps let grease into the plenum.
Do you take the used filters away?
We do. The dirty filters are taken away for cleaning while a clean set goes in.
Looking after it afterwards
How long the results last depends on use and care. We suggest:
- Keep filter exchange and TR19 cleaning on the same plan
- Watch for grease drips between visits
- Mention it if the kitchen gets busier
- Keep canopy surfaces wiped down
Fresh filters improve airflow at the canopy from the moment they’re fitted. Always run the extract during cooking so they catch grease as intended.
If cooking has stepped up, the filter schedule should too. Adjusting the schedule now prevents a build-up in the ducts.
Honest limits
We will always give you a straight diagnosis, so here’s what this work cannot put right:
- Grease deep in the extract system
- A noisy or failed extract fan
- Cooking smells reaching neighbours, which need odour control
If you’re not sure, just call us on 0345 646 2711 or drop us a line and we’ll give you a straight answer.
What we work on in Breach
- School and hospital kitchens
- Wall canopies
- Baffle filters
- Island canopies
- Restaurants and pubs
- Mesh filters
What staff can safely do
Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
When to call us in Breach
Filters get bent and damaged with handling. A bent filter does not seat properly, leaving gaps for grease to slip through.
Common reasons sites call us are:
- Gaps where filters have been removed
- Grease left in baffles after washing
- Poor airflow through the filters
- Grease building up behind the canopy filters
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Acrise Place is about 3.4 miles south), access may need planning.
Comparing quotes
- Whether the quote shows VAT
- Whether the figure could change on the day
- Proof of insurance
- What happens if part of the system cannot be accessed
Different parts, different methods
Baffle filters
Baffle filters use overlapping metal blades that force the air to change direction. Grease drops out as it does.
The plenum
The plenum is the space behind the filters. Grease that gets past the filters settles there.
More services for Breach
What happens if it’s left?
When filters block, extraction suffers. Heat and fumes hang in the kitchen, and the fan works harder to pull air through. A regular exchange keeps the airflow where it should be. Equipment tucked in a roof space or outbuilding near Breach rarely gets looked at unless someone books it.
What you pay reflects the actual work. That is why we survey first, from photos or on site, and the price is agreed before any work starts.
Why us?
- One contact for all your sites in London and the South East
- Fixed quotes from a survey or pictures
- Accredited under CHAS and SafeContractor, with ISO 9001
- Full insurance on every job
What grease filter exchange looks like in Breach
It’s Canterbury City council that sends environmental health officers to food businesses in Breach. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after. Breach is covered by Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Around Breach, as anywhere, we clean the parts you can’t see as well as the canopy you can.
Breach is about 5 miles north of Hawkinge, in Kent. We carry out grease filter exchange for businesses, landlords and public buildings in Breach and the rest of Kent. Across Kent, we cover 922 places, Breach among them. You can also see our page for Maidstone, about 27 miles away.
All of CT4 is within our area for grease filter exchange, from the main roads to the quietest streets. If your site is just outside Breach, we cover Lodge Lees (1 mile east), Denton (1 mile east), Wootton (2 miles south-east), Shelvin (2 miles east) and Selsted (2 miles south-east). Further out, we also cover Ashford (12 miles west), Canterbury (7 miles north-west), Dover (7 miles south-east), Folkestone (7 miles south), Whitstable (13 miles north-west) and Deal (11 miles east).
Around Breach
In Breach, that means kitchens and buildings near The Palm Tree Inn and Jumping Downs and the streets around them. For rail, the closest station is Snowdown station, about 3.6 miles north-east. For a walk, there’s Cheriton Hill.
What we do, step by step
There are three stages on the day: set-up, the treatment itself and the sign-off. Set-up means sheeting and making equipment safe, while signing off means the written report and photos. Most of the time goes on the work itself, and that takes less than an hour in most kitchens. Pictures of the system and its access let us plan the work in Breach before we set off.
- First, we check the canopies and the filters in them.
- Any damaged or missing filters are noted.
- Greasy filters are swapped for clean ones.
- The filters are checked for fit before we go.
- We tell you if the plenum or canopy needs a clean.
How to prepare
- Find the previous report, if there is one
- Tell us where we can park and unload
- Clear loose items from the work area
Get a fixed quote
Quotes are quick. Call or email with a few details and you’ll typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.