Surrey · Fire damper testing
Fire and smoke damper testing in Walliswood
Fire damper drop testing and smoke damper testing, with a record for each damper for commercial sites in Walliswood and across Surrey. CHAS, SafeContractor and ISO 9001, and fully insured.
- Dirty dampers that may not close
- Buildings with no damper register
- Smoke dampers that need testing through their controls
Fire damper testing in Walliswood, done properly
The point of testing is to find dampers that fail. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper, so the fault does not just sit on a list. The work covers offices and schools, motorised smoke dampers and hospitals and care homes, and the jobs we see most are motorised smoke dampers due for testing and dampers overdue for their annual drop test.
Somewhere as small as Walliswood, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
Every visit ends with a written report and photos, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Walliswood (RH5)
- Region
- Surrey
- Reporting
- Report and photos after the visit
- Quotes
- A fixed price before work begins
- Hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Common questions in Walliswood
Can you work in Walliswood outside opening hours?
Yes. We work evenings, overnight and at weekends. It means the site in Walliswood keeps running as normal. Tell us your opening hours when you ask for a quote.
Which fire authority looks after Walliswood?
Walliswood is in the area of Surrey Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
What is TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not law, but it’s the benchmark.
What happens to the waste?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it doesn’t spread.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Can you look after several sites?
Yes. One number covers all your sites in our area, and visits can be set on a regular cycle.
Can you price the work without visiting?
Typically, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we typically come back within one working day. If photos are not enough, we will survey first.
Can you set up regular visits?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.
Places near Walliswood
More services for Walliswood
How the visit works
On the day, we arrive at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool first, and floors and nearby surfaces are sheeted. On site, it takes a few hours for a single floor, with bigger buildings phased over more than one visit. We agree a date with you, plan the drive to Walliswood and turn up when the site is quiet.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we can’t reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Before we arrive
- Have your last certificate or report to hand
- Clear loose items from the work area
- Tell us the best time to work, such as after service or at a weekend
Ask for a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.
Read more
Staff cleaning versus specialist work
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, which is where we come in.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Why deal with it now?
After any fire, one of the first questions is what maintenance had been done. Damper test records are part of that answer, and they only exist if the testing happened. In a place like Walliswood, ductwork and fans are easy to forget until something goes wrong.
Combining work into one visit or one programme often makes better use of the time. Tell us about everything you’d like looked at and we will price it together.
Why book with us
- Photo reports with every job
- Fixed quotes, usually within one working day
- We are fully insured
- One number for every site across the South East and London
Take a look at what affects the cost or our accreditations and certificates.
When it’s something else
A few issues sit outside what this work can do:
- Fire alarm or control system faults behind a smoke damper
- Ductwork crossing a fire wall with no damper fitted
- Fire risk assessments, which need a fire risk assessor
If in doubt, phone us on 0345 646 2711 or use the quote form and we will say what we think.
What we work on in Walliswood
- Motorised smoke dampers
- Hospitals and care homes
- Fusible link fire dampers
- Riser dampers
- Offices and schools
- Wall and floor dampers
Walliswood buildings and fire safety
Walliswood, about 29 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you. Surrey Fire and Rescue Service covers Walliswood. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
For buildings in and around Walliswood, every damper is drop tested, reset and recorded.
Walliswood is about 6 miles north-west of Horsham, in Surrey. Whether your site is in the middle of Walliswood or further out, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. 395 places in Surrey are on our list, from busy centres to quieter spots. Our Guildford page covers sites nearby, about 11 miles away.
Fire damper testing in RH5 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Horsham Road, Standon Lane and Oakfields or a nearby road, we can help. Neighbouring places we cover for fire damper testing include Mayes Green (1 mile north), Ewhurst Green (2 miles north-west), Ellen's Green (2 miles south-west), Ewhurst (2 miles north-west) and Cranleigh (4 miles west). Larger places within reach include Guildford (11 miles north-west), Woking (15 miles north-west), Epsom (15 miles north), Horley (11 miles east), Redhill (12 miles north-east) and Reigate (11 miles north-east).
Around Walliswood
We work in commercial kitchens and buildings around Wallis Wood and The Scarlett Arms Public House, among other places. For rail, the closest station is Ockley station, about 3.1 miles north-east of the centre. Nearby you’ll also find Abinger Castle (4.8 miles north) and Horsham Hospital (5.5 miles south-east). Open spaces near Walliswood include Vann Lake and Leith Hill.
Common problems we fix in Walliswood
Other trades work around dampers all the time. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
The symptoms we’re asked about most include:
- Gaps in the fire damper test log
- Dampers that cannot be reached without an access panel
- Dampers flagged on a fire risk assessment
- Dampers overdue for their annual drop test
The nearest hospital, Horsham Hospital, is about 5.5 miles south-east; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly.
Before you book anyone
- What happens if part of the system can’t be accessed
- Whether the price is fixed
- When the next visit should be, and why
- What paperwork you get at the end
What affects the quote in Walliswood
Every site gets its own quote. This is what makes a difference:
- The scale of the work
- The condition of the system
- Travel, parking and unloading
- Site rules, permits and inductions
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you’re unsure, give us a ring on 0345 646 2711 or drop us a line and we’ll give you an honest view and a fixed quote.
Asking for a quote
Before you ask for a quote, gather:
- Your last certificate, test record or report
- Photos showing the whole system and its surroundings
- Where the site is and what kind of site it is
- Problems your staff have spotted
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Aftercare tips
So the system stays in good health:
- Store test records alongside the fire risk assessment
- Add new dampers to the register as they’re fitted
- Act on failed dampers rather than leaving them on file
- Never wedge or tie a damper open
Failed dampers are set out separately, each with the fault we found, and we can quote for remedials. After a repair, we retest the damper and update the record.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.