Hampshire · Fire damper testing
Fire damper testing in Wallington, Hampshire
Professional fire damper testing in and around Wallington, booked around your opening hours and signed off in writing with pictures.
- Smoke dampers that need testing through their controls
- Fire damper items raised by an assessor
- Rusted damper blades and springs
Your questions about fire damper testing in Wallington
Can the work in Wallington be done at night or at weekends?
Yes, out-of-hours work is a big part of what we do. It means the site in Wallington keeps running as normal. Your opening times are the first thing we ask for.
Do you work in villages like Wallington?
Yes, we work in villages as well as towns, and Wallington is covered. The journey is planned ahead, so a few details about the route help.
What do you do to protect the area?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
Can you price the work without visiting?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, then a fixed quote.
What does fire damper testing cost?
There’s no set price, as it depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before we start.
Can you set up regular visits?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. The report from each visit recommends the next date.
Is TR19 a legal requirement?
No. TR19® itself isn’t law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
Where does the waste go?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. We do not leave it behind.
How we handle fire damper testing in Wallington
Ductwork can carry fire and smoke between compartments, and the damper is what stops it. A damper only does its job if the blade can drop fully. Annual drop testing is how you know in each part of the building. The work covers offices and schools, fusible link fire dampers and motorised smoke dampers, and the jobs we see most are dampers clogged with dust or grease and fire damper items raised by an assessor.
In a smaller place like Wallington, buildings with fire dampers are more likely to be a school, a surgery, a care home or a hotel than an office block. The law on keeping them working does not change with the size of the place.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Wallington (PO16, PO14, PO17)
- Wider area
- Hampshire
- Paperwork
- Report and pictures after the visit
- Price
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Fire dampers in Wallington buildings
Wallington is within about 1 mile of the coast. Near the sea, we look closely for rust on dampers serving intakes and louvres. Food Standards Agency data includes about 20 schools, colleges and universities, about 26 caring premises (care homes, nurseries and hospitals) and about 3 hotels, B&Bs and guest houses in Wallington and the streets around it, up to about 1.5 miles out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. About 2.3 miles north-west of Wallington is Knowle Hospital, the nearest hospital. Hospitals are a good example of a building with fire dampers across many floors and departments.
If you manage a care home or clinic near Wallington, the testing that a hospital like Knowle Hospital (about 2.3 miles north-west) relies on applies to your dampers too.
Wallington is about 1 mile east of Fareham, in Hampshire. Whether your site is in the middle of Wallington or further out, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. We cover 683 places across Hampshire, from busy centres to quieter spots.
Work in PO16, PO14 and PO17 is surveyed, quoted and booked the same way as anywhere else. Local streets include Bath Lane, Drift Road and Osborn Road, all of which we cover for fire damper testing. Wallington is on the A32, which makes it straightforward for our technicians to reach for fire damper testing. Other places close to Wallington include Fareham Common (1 mile south-west), North Fareham (1 mile north), Fareham (1 mile west), Boarhunt (2 miles north-east) and Crockerhill (2 miles north). Further out, we also cover Gosport (4 miles south), Havant (8 miles east), Eastleigh (11 miles north-west), Horndean (8 miles north-east), Totton (15 miles west) and Chandler's Ford (13 miles north-west).
Near you in Wallington
Typical jobs here are in premises near Harrison Primary School, Cams Hill School and The Golden Lion Public House. The closest station to Wallington is Fareham station, roughly 1 mile west of the centre. A little further out are Fareham Shopping Centre (under half a mile west) and Knowle Hospital (2.3 miles north-west). Open spaces near Wallington include Portsdown Hill and West of the River Alver.
Why deal with it now?
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. Booking now means the visit to Wallington is planned around you, not forced by a breakdown.
What you pay reflects the actual work. That’s why every job is surveyed first, and why the quote is fixed before we start.
Why Wallington businesses choose us
- CHAS and SafeContractor accredited, with ISO 9001
- Full insurance on every job
- Fixed quotes, normally within one working day
- In business since 2009
Take a look at our cost guide and how to check a contractor.
Also near Wallington
What else we do in Wallington
The process
Everything the job needs comes with us, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. The visit takes anything from a couple of hours for a handful of dampers to a full day for a large building. In a place like Wallington, we fit the visit around your hours.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
Preparing for the visit
- Make sure someone can let us in and lock up afterwards
- Mention any locked doors, roof access or ceiling voids
- Make sure equipment near the work can be switched off and left to cool
Ask for a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll normally have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Related advice
What your team can do, and what needs us
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Signs you need fire damper testing in Wallington
Buildings in Wallington change owners, tenants and maintenance contractors over the years, and damper records often get lost along the way. With no register, it’s hard to say how many dampers exist, let alone when they were tested.
Signs it’s time to call us include:
- Rusted damper blades and springs
- Dust or grease build-up on damper blades
- Damper actions from a fire risk assessment
- Missing or out-of-date damper records
A school like Wykeham House School can have any dampers tested over half-term without disturbing lessons.
Before you book anyone
- Whether the figure could change on the day
- What hours they’ll be on site
- Proof of insurance
- If they look at the system before pricing
Managing agents and facilities teams in Wallington
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
Records are where multi-site compliance often slips. Each visit produces a dated report with photos, so you can show an insurer or inspector what was done at each site.
Fixed quotes for fire damper testing in Wallington
The price is fixed before any work begins. It takes into account:
- Working hours and out-of-hours timing
- The condition of the system
- One-off work versus a regular cycle
- Parking and loading at the site
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all play a part.
Helping us quote
A few details help us quote accurately. When you get in touch, it helps to send:
- Photos showing the whole system and its surroundings
- When the site is open and when it’s quiet
- Your last certificate, test record or report
- Problems your staff have spotted
There’s no standard price list, because no two systems are the same. We look at your system first, from pictures or on a visit, and then give you a fixed quote. To start, call us on 0345 646 2711, or email photos.
Part by part
Fusible link fire dampers
Most fire dampers are held open by a fusible link. When the link reaches its set temperature it melts, and the blade drops to close the duct. We release the blade, check it closes fully and reset it.
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. We work through them floor by floor so each one is accounted for.