Kent · Fire damper testing

Fire Damper Testing in Throwley

Fire damper testing in Throwley from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.

  • Dust or grease build-up on damper blades
  • Dampers that stick or will not close fully
  • Fire dampers that haven’t been tested for over a year

Fire damper testing near Throwley

How we handle fire damper testing in Throwley

Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. Drop testing proves that this still happens, and we record the result for every damper we test. Typical jobs include gaps in the fire damper test log and fire damper items raised by an assessor, across wall and floor dampers, hospitals and care homes and riser dampers.

Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.

The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.

Place
Throwley (ME13)
Wider area
Kent
Paperwork
Photo report after every visit
Quote
A fixed quote up front
When we work
When your site is closed, plus a 24/7 line
Phone
0345 646 2711
Updated
30 October 2026
Before and after view down the inside of a rectangular extract duct

What fire damper testing cannot fix

A few issues sit outside what this work can do:

  • Designing the building’s fire compartments
  • Sign-off of the whole building’s fire safety
  • Dampers that were never installed where they’re needed

If you are not sure, just ring 0345 646 2711 or email us and we’ll give you a straight answer.

What the work covers

  • Offices and schools
  • Wall and floor dampers
  • Riser dampers
  • Motorised smoke dampers
  • Hospitals and care homes
  • Fusible link fire dampers

What affects the cost of fire damper testing

We quote each job individually. These are the things that affect it:

  • The scale of the work
  • Any permits to work or inductions
  • A single visit or a regular plan
  • Travel, parking and unloading

The cost depends on how big the system is, what state it’s in and how easy it is to reach. We give you a fixed price before any work starts, so there are no surprises.

What we need to know

What to send for a quote:

  • Any symptoms, from odd noises to smells or leaks
  • Your opening hours and when the area is out of use
  • Your last certificate, test record or report
  • Where the plant sits or the system leaves the building, such as a roof or outside wall

Here’s what helps us quote: the address, the type of site and when it’s open, photos of the system and any previous report or certificate. Once you have those, call 0345 646 2711 or use the quote form.

Fire damper testing around Throwley

Throwley is about 44 miles from central London, well within the area we cover across London and the South East. Visits are booked around your hours, evenings and weekends included. Kent Fire and Rescue Service covers Throwley. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.

If you manage an older building converted to a hotel or venue, like many historic houses in the area (Belmont House and Gardens is about 0.6 miles north-west), finding every damper is the first job.

Throwley is about 4 miles south of Faversham, in Kent. Every kind of commercial site in Throwley, we can take on fire damper testing. Visits can be booked for evenings, overnight or weekends so the site keeps running. 922 places in Kent are on our list, large and small. There’s also a page for Maidstone, roughly 14 miles from Throwley.

Postcode districts we cover here for fire damper testing: ME13. If your site is just outside Throwley, we cover Throwley Forstal (1 mile south), Sheldwich (1 mile north-east), Badlesmere (1 mile east), Sheldwich Lees (1 mile east) and Eastling (2 miles north-west). We also work in nearby towns such as Maidstone (14 miles west), Ashford (9 miles south), Canterbury (10 miles east), Sittingbourne (7 miles north-west), Whitstable (10 miles north-east) and Faversham (4 miles north).

Around Throwley

For rail, the closest station is Faversham station, roughly 3.6 miles north-east. Other landmarks nearby include Newnham Castle (2.7 miles north-west).

Map of Throwley © OpenStreetMap contributors

What we do, step by step

We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. After that, the work takes a morning or an afternoon for a small number of dampers, longer where there are many. A quick note on how to find the site and where to park makes a visit to Throwley run smoothly.

  1. Before the visit, we agree access, timings and any areas with restrictions.
  2. Ceiling tiles and hatches are opened and each damper’s access panel removed.
  3. We release each blade and check it shuts all the way.
  4. The damper is reset and its condition noted.
  5. We close everything up and send the results in a report.

Getting ready for the visit

  • Agree a time when the area can be out of use
  • Make sure someone can let us in and lock up afterwards
  • Tell us about site rules, permits or sign-in

Get a fixed quote

For a fixed quote, call us on 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will usually have a quote within one working day.

Get a quick quote

Read more

Questions from Throwley

Which fire service covers Throwley?

Throwley is in the area of Kent Fire and Rescue Service. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.

Do you cover smaller places like Throwley?

Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.

Is there a survey before the work?

Yes. We always survey first, from your photos and details, or with a visit where necessary. Then you get a fixed quote.

Whose job is it to make sure fire dampers are tested?

Under the Fire Safety Order 2005, it’s the responsible person, who might be the employer, owner, landlord, facilities manager or managing agent. They must keep fire safety measures, including dampers, in working order.

Does the law say we must follow TR19?

Not in itself. Insurers, fire officers and EHOs look to TR19® as the benchmark, and many insurance policies ask for proof of TR19® cleaning. The law behind it is the Fire Safety Order 2005, which applies in England and Wales.

Can you quote from pictures?

Yes, if we can see what we need. If not, a site survey comes first, and the quote follows that.

How do you keep the site clean during the work?

We cover floors and nearby surfaces with sheeting before work begins, and anything we remove is contained. Before we leave, we tidy up and clean down.

Do we need to close while you work?

Not usually. We need the work area to ourselves while we’re on site, so the visit goes in a quiet slot.

Aftercare tips

Simple habits between visits make a real difference. We recommend:

  • Don’t let anything obstruct a damper’s blade
  • Keep to at least yearly testing
  • Get remedials done soon after a failed test
  • Add new dampers to the register as they’re fitted

Put the next test in the diary within twelve months. The guidance is at least once a year, so it helps to book it before the date slips.

Deal with leaks and condensation near dampers quickly. Corrosion is a common reason blades stick.

Do you need fire damper testing in Throwley?

Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.

Common reasons sites call us are:

  • Dampers affected by leaks or condensation
  • Damper actions from a fire risk assessment
  • Dampers hidden with no access panel or hatch
  • Blades that jam part-way when released

In Throwley, each damper is dropped to prove it closes fully, then reset.

What to look for in a quote

  • When they can work, and whether that’s outside your opening hours
  • What insurance they carry
  • Proof of accreditation you can verify
  • What paperwork you get at the end

Choosing a duct cleaning contractor

What your team can do, and what needs us

When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.

In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.

How the job changes from site to site

Offices and retail

In shared buildings, some dampers sit inside tenants’ space. We agree access with the managing agent before the visit.

Ceiling voids and risers

Where ductwork runs up through a building, there are often dampers at every floor. Testing goes floor by floor so each one is accounted for.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London