Kent · Fire damper testing
Fire damper testing in Sittingbourne, Kent
For fire damper drop testing and smoke damper testing, with a record for each damper in Sittingbourne, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Smoke dampers with no recent test
- Dampers clogged with dust or grease
- Corroded dampers in damp risers and plant rooms
Fire damper testing for kitchens and businesses in Sittingbourne
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we can’t get to, so you know where the gaps are. If you have smoke dampers with no recent test and fire dampers nobody can get to, we can help.
Many buildings in a town like Sittingbourne have only a few dampers, but each one can seize if it’s never tested. Dust, grease and corrosion are the usual reasons a blade will not drop.
We’ve been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
- Where
- Sittingbourne (ME10, ME9)
- Wider area
- Kent
- Reporting
- Report and pictures after the visit
- Quote
- A fixed price before any work starts
- When we work
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
When something else is needed
We’d rather tell you now than book work that will not help, so these are the things it won’t cover:
- Holes around ductwork in fire-resisting walls
- Missing dampers that a designer needs to specify
- Deciding where dampers should be fitted
If you are not sure, just ring 0345 646 2711, or send details by email and we will give you a straight answer before booking.
What the work covers
- Motorised smoke dampers
- Fusible link fire dampers
- Riser dampers
- Offices and schools
- Wall and floor dampers
- Hospitals and care homes
Staff cleaning versus specialist work
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
What affects the quote in Sittingbourne
The price is fixed before any work begins. It takes into account:
- Access, including roofs, risers and ceiling voids
- The scale of the work
- The number of sites or systems
- When the work can happen, such as evenings, overnight or weekends
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you are not sure what’s needed, call 0345 646 2711 or email us for straight advice and a fixed quote.
What we need to know
You do not need the technical terms. It helps if you can send:
- Close-ups of filters, grilles, hatches or access panels
- Photos showing the whole system and its surroundings
- How we’d reach plant on a roof or in a plant room
- The paperwork from the last visit, if you have it
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
What happens on the day
A visit follows the same order every time: protect the area, make the system safe, carry out the fire damper testing, clear away and hand over the paperwork. On site, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. We arrive in Sittingbourne once you’ve closed and leave the site ready for the morning.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Getting ready for the visit
- Tell us the best time to work, such as after service or at a weekend
- Arrange a key holder or contact on site
- Mention any sign-in, permit or induction we need
Get a fixed quote
Here’s what helps us quote: the address, the type of site and when it’s open, pictures of the system and any previous report or certificate. Then call us on 0345 646 2711, or send details by email.
Related advice
Different parts, different methods
Access panels
Over time, hatches and panels get covered up. Letting us know where they are speeds the visit up.
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. Heat melts the link and the blade falls shut across the duct. We release the blade, check it closes fully and reset it.
Multi-site and managed buildings
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
Facilities teams in offices, schools and healthcare sites book us too in Sittingbourne and across Kent. Work can be phased by floor, building or site to keep disruption down.
Towns and villages near Sittingbourne
Also in Sittingbourne
Leave it or put it right?
Putting testing off doesn’t change whether the dampers will close; it just means you don’t know. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. Whatever the system, dirt and wear only get worse.
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote and give you a fixed price before any work starts.
What you get with us
- Survey first, then a fixed quote
- Fully insured
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- One contact for all your sites in London and the South East
Read our cost guide or how to check a contractor.
Fire damper testing around Sittingbourne
Sittingbourne lies within about 2 miles of the sea. Salt air speeds up corrosion, and corrosion is one of the things that can stop a fire damper closing. There are about 24 schools, colleges and universities, about 32 hospitals, care homes and childcare premises and about 3 hotels and guest houses on the FSA’s food hygiene register within roughly a mile and a half of the centre of Sittingbourne. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Fire safety in Sittingbourne falls to Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
If you manage a school site such as Borden Grammar School, any fire dampers can be tested in the holidays. For managed buildings around Sittingbourne station, damper testing can be booked out of hours so tenants aren’t disturbed.
Sittingbourne is about 37 miles east of London, in Kent. Whatever kind of site you run in Sittingbourne, fire damper testing is something we can help with. We can work out of hours so the site keeps running. Sittingbourne is one of 922 towns, villages and districts in Kent where we work for fire damper testing. Maidstone is in our area too, around 10 miles away.
Fire damper testing in ME10 and ME9 is surveyed, quoted and booked the same way as anywhere else. We cover sites on High Street, Roman Square and Moonstone Square and nearby roads. You will find Sittingbourne on the A2 and A249, which makes it straightforward for our technicians to reach for fire damper testing. If your site is just outside Sittingbourne, we cover Murston (1 mile east), Milton Regis (1 mile north-east), Kemsley (1 mile north), Howt Green (1 mile north-west) and Heart's Delight (1 mile south-west). Larger places within reach include Maidstone (10 miles south-west), Ashford (15 miles south), Whitstable (13 miles east), Faversham (7 miles east), Minster (6 miles north-east) and Kings Hill (15 miles west). Being one of Kent’s larger places, Sittingbourne has a wide mix of commercial premises, and we cover all of them for fire damper testing.
What’s near Sittingbourne
Around Sittingbourne, our work takes us to kitchens and buildings near Milton Court Primary Academy, The Golden Hope pub and Milton Creek Country Park and the streets around them. Sittingbourne has its own railway station: Sittingbourne station. Well-known places in the area include Bayford Court (within half a mile east) and Court Hall Museum (less than half a mile north).
FAQs for Sittingbourne
Which fire authority looks after Sittingbourne?
Kent Fire and Rescue Service is the fire and rescue service for Sittingbourne. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Does being near the coast affect fire damper testing in Sittingbourne?
Yes, to a degree: at about 2 miles from the coast, Sittingbourne gets salt-laden air that corrodes metal faster. Corrosion is one of the things that can stop a damper closing, so it’s noted at every test.
Are you insured?
Yes. We’re fully insured, and we can share the details when you need them.
Can you come out in an emergency?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
How far ahead should we book?
It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not law, but it’s the benchmark.
Who is responsible for fire damper testing?
It sits with the building’s responsible person. That’s often the employer, owner, landlord, facilities manager or managing agent. Our part is the testing and the records that show it’s been done.
Which sectors do you work in?
Commercial premises of every kind: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. We fit the work around how the site operates.