Hampshire · Fire damper testing
Fire and smoke damper testing in Thedden
Need fire damper testing in Thedden? We diagnose first, fix the price and book the work around your hours, then sign off with a report and photos.
- Blades that jam part-way when released
- Dampers overdue for their annual drop test
- Dampers that cannot be reached without an access panel
Managing agents and facilities teams in Thedden
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
Whether it’s one building or many, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with photos.
Fire damper testing in Thedden
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. The work covers motorised smoke dampers, wall and floor dampers and riser dampers, and people most often call us about dampers that stick or won’t close fully and smoke dampers that need testing through their controls.
For a building in or near Thedden, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Every visit ends with a written report and photos, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Thedden (GU34)
- Region
- Hampshire
- Records
- Written report with photos
- Quote
- Fixed quote, usually within a working day
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Updated
- 30 October 2026
When something else is needed
We will not sell you work that does not address the problem, so here are the limits:
- Designing the building’s fire compartments
- Fire alarm or control system faults behind a smoke damper
- Signing off a building’s overall fire safety
If in doubt, call us on 0345 646 2711 or drop us a line and we’ll say what we think before booking.
Parts of the system we cover
- Offices and schools
- Motorised smoke dampers
- Riser dampers
- Wall and floor dampers
- Fusible link fire dampers
- Hospitals and care homes
Aftercare tips
How long the results last depends on use and care. We suggest:
- Close off damper faults promptly
- Keep ceiling hatches and duct panels easy to open
- Update the register when ductwork changes
- Store test records alongside the fire risk assessment
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Outstanding faults should be dealt with, not left on file.
The simplest way to avoid failures is to test on time, every year. Faults caught early are easier to fix.
What happens on the day
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. The visit takes a few hours for a single floor, with bigger buildings phased over more than one visit. If the van will struggle with a lane or gateway near Thedden, let us know and we will plan around it.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
How to prepare
- Find the previous report, if there is one
- Plan for cooking equipment or plant to be off before we arrive
- Tell us the best time to work, such as after service or at a weekend
Getting a quote
To get a fixed quote, phone us on 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. You’ll usually have a quote within one working day.
Advice
In-house cleaning or a specialist?
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Signs you need fire damper testing in Thedden
Dampers are hidden above ceilings, inside risers and behind boxing. If there’s no hatch to reach them, they slip off everyone’s list, and anything nobody can get to goes untested.
Most sites get in touch after spotting one of these:
- Dampers that can’t be reached without an access panel
- Fire dampers that haven’t been tested for over a year
- Corroded dampers in damp risers and plant rooms
- Blades that jam part-way when released
School buildings such as Amery Hill School are usually tested in the holidays, wherever they have dampers.
What your quote should include
- Whether the figure could change on the day
- What records you will receive afterwards
- When they can work, and whether that’s outside your opening hours
- Whether the whole system is included, or only the parts that are easy to reach
Thedden buildings and fire safety
We cover Thedden, about 47 miles from central London, as part of our work across London and the South East. The visit is fixed around your opening hours, not ours. Thedden is covered by Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
If you manage a care home or clinic near Thedden, the testing that a hospital like Alton Community Hospital (about 1.6 miles east) relies on applies to your dampers too. If you manage a historic building in the area (Bentworth Hall is about 1 mile west), dampers fitted during conversions can be hard to reach and need recording.
Thedden is about 2 miles west of Alton, in Hampshire. Whatever kind of site you run in Thedden, fire damper testing is something we can help with. We can work out of hours so the site keeps running. We cover 683 places across Hampshire, from busy centres to quieter spots. We also work in Reading, about 21 miles from Thedden.
Postcode districts we cover here for fire damper testing: GU34. We also cover the places around Thedden: Beech (1 mile south-east), Wivelrod (1 mile south-west), Bentworth (1 mile north-west), Holt End (1 mile west) and New Copse (2 miles west). Further out, we also cover Basingstoke (9 miles north), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (13 miles north-east) and Petersfield (10 miles south).
Landmarks near Thedden
The nearest railway station is Alton station, about 2.6 miles east of the centre. Well-known places in the area include Alton Community Hospital (1.6 miles east) and Barton Castle (3.9 miles west). For a walk, there’s King's Hill.
What else we do in Thedden
What the work involves, part by part
Smoke dampers
If a smoke damper will not operate when signalled, it goes on the report as a failure, with a note of what we found.
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Regular damper testing supports that.
Your questions about fire damper testing in Thedden
Can you come to Thedden after we close?
Yes, we can come after you close and finish before you open. The work in Thedden can fit around your hours. Just call 0345 646 2711 or use the quote form with your opening times and we will plan around them.
Can you get to a site in Thedden?
Yes. Villages and rural sites across the South East are part of our work, Thedden included. Photos of the system and directions to the site help us plan the visit.
How often does BESA say fire dampers should be tested?
At least once a year, under BESA guidance, plus a test when the damper is first installed. Some sites choose to test more often where the risk is higher.
How do you keep the site clean during the work?
By covering it before any work starts. The work is kept contained and leave the area clean.
How long will damper testing take?
Expect it to take anything from a couple of hours for a handful of dampers to a full day for a large building. How easily we can reach the dampers makes the most difference, and we will give you an idea when we quote.
Who has the duty to keep fire dampers working?
It sits with the building’s responsible person. That’s often the employer, owner, landlord, facilities manager or managing agent. Our part is the testing and the records that show it’s been done.
Who is the responsible person?
The law calls them the responsible person. That’s generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. Your lease and fire risk assessment should make it clear.
Do you offer emergency callouts?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.