Hampshire · Fire damper testing

Fire damper testing in Stone, Hampshire

Specialist fire damper testing for Stone: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.

  • Rusted damper blades and springs
  • Fire damper items raised by an assessor
  • Buildings with no damper register

Fire damper testing in Stone

What happens on the day

There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Afterwards, the area is left tidy and the written report follows. We agree a date with you, plan the drive to Stone and turn up when the site is quiet.

  1. First we check the schedule and the last set of results.
  2. Each damper is found and checked for access.
  3. Fire dampers are drop tested, and smoke dampers are tested through their controls.
  4. Dampers that pass are reset, and failures are logged with what we found.
  5. The report sets out the results, and we can quote to repair or replace failed dampers.

Preparing for the visit

  • Clear loose items from the work area
  • Name a contact who can let us in at the agreed time
  • Mention any parking or loading restrictions

How to get a quote

To get a fixed quote, give us a ring on 0345 646 2711 or email us and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. You’ll typically have a quote within one working day.

Get a quick quote

Read more

Fire damper testing in Stone

Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and confirming every blade travels fully and comes back. We are often asked to deal with dampers that stick or won’t close fully and dirty dampers that may not close, across offices and schools, fusible link fire dampers and motorised smoke dampers.

In a village or hamlet like Stone, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.

The report is your system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.

Five Duct Doctor technicians in navy uniforms with the company vans
Where
Stone (SO45)
Region
Hampshire
Records
Report and photos after the visit
Quotes
A fixed quote up front
When we work
Out of hours as standard, 24/7 emergency line
Call
0345 646 2711
Reviewed
30 October 2026

Looking after it afterwards

No system stays clean for ever, but care slows the build-up. Our tips:

  • Keep to at least yearly testing
  • Keep an eye out for damp around dampers
  • Keep ceiling hatches and duct panels easy to open
  • Brief other trades about dampers in ceilings and risers

Any damper that failed is listed with the reason, and we can quote for remedials. After a repair, we retest the damper and update the record.

A simple register of every damper helps a great deal: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.

What we are called out for in Stone

Building work often happens right next to dampers. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.

Clients normally contact us after spotting one of these:

  • Dampers affected by leaks or condensation
  • Missing or out-of-date damper records
  • Dampers that stick or will not close fully
  • Dampers flagged on a fire risk assessment

If you manage a historic building in the area (Beaulieu Palace House is about 4.4 miles north-west), dampers fitted during conversions can be hard to reach and need recording.

Questions to ask before you book

  • How VAT is shown on the quote
  • What’s included in the scope, part by part
  • Whether the figure could change on the day
  • Proof of accreditation you can verify

Choosing a duct cleaning contractor

When something else is needed

To be straight with you, there are a few things this work will not fix:

  • Designing the building’s fire compartments
  • Fire alarm or control system faults behind a smoke damper
  • Missing dampers that a designer needs to specify

If in doubt, ring 0345 646 2711 or use the quote form and we will say what we think.

Where we work

  • Motorised smoke dampers
  • Hospitals and care homes
  • Offices and schools
  • Fusible link fire dampers
  • Riser dampers
  • Wall and floor dampers

Landlords, agents and facilities managers

For anyone managing more than one site, we can schedule visits across all of them on one quote. Each site gets its own report and pictures, so records stay tidy.

Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.

Fire damper testing in Stone: local notes

Stone lies within about 1 mile of the sea. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. Stone sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.

Drop testing in and around Stone means releasing each blade, watching it close and resetting it.

Stone is about 3 miles north-west of Cowes, in Hampshire. Anywhere in SO45, we can take on fire damper testing. We cover 683 places across Hampshire, from busy centres to quieter spots. For sites nearby, see our Southampton page (9 miles or so).

Work in SO45 follows the same survey, fixed quote and written report as everywhere else we cover. Other places close to Stone include Gurnard (3 miles south-east), Cowes (3 miles south-east), Rew Street (4 miles south), Northwood (4 miles south-east) and Great Thorness (4 miles south). We also work in nearby towns such as Gosport (9 miles east), Eastleigh (12 miles north), Fareham (8 miles north-east), Totton (11 miles north-west), Chandler's Ford (13 miles north) and Hedge End (9 miles north).

What’s near Stone

Well-known places in the area include Calshot Castle (2.8 miles north-east) and Sir Max Aitken Museum (3.3 miles south-east). The countryside around Stone includes Mill Hill.

Map of Stone © OpenStreetMap contributors

Part by part

Fusible link fire dampers

The link has to be in good order for the damper to work. Each link is looked at as part of the test and note anything that isn’t right.

Schools, hospitals and care homes

Where residents can’t easily get out, holding fire and smoke back matters even more. Regular damper testing supports that.

Questions from Stone

Which fire and rescue service is responsible for Stone?

It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Stone. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.

Do you work overnight in Stone?

Yes, nights and weekends are routine for us. The site is handed back ready to open. Just call 0345 646 2711 or send us an email with your opening times and we’ll plan around them.

What does fire damper testing cost?

It depends on the site, so we quote each one individually. For a quote, call 0345 646 2711 or use the quote form with the site type, opening hours and a few photos.

Do you have a 24/7 line?

Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we will talk you through the next steps.

What accreditations do you have?

Our accreditations are CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.

What happens to dampers you cannot get to?

It’s noted as inaccessible rather than skipped. With an access panel fitted, it can be tested on a return visit.

What does TR19 mean?

TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.

Do you work in Stone?

Yes. We work in Stone and the rest of Hampshire, within our South East and London area. For a fixed quote, give us a ring on 0345 646 2711 or send us an email.

What affects the quote in Stone

There’s no set price list, because sites vary so much. The quote depends on:

  • The size of the system
  • Whether it’s a one-off visit or part of a schedule
  • How many systems or sites are involved
  • Where the site is and how we reach it

Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.

What to send for a quote

The more you tell us, the more accurate the quote. With your enquiry, please include:

  • The site address and the type of premises
  • Problems your staff have spotted
  • Any previous report or certificate
  • Your opening hours and when the area is out of use

To help us quote: where the site is, what it is and its opening hours, a few pictures and any previous report or certificate. Once you have those, call us on 0345 646 2711 or drop us a line.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London