Surrey · Fire damper testing
Fire damper inspection in Stanwell Moor
Specialist fire damper testing for Stanwell Moor: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Blades that jam part-way when released
- Dirty dampers that may not close
- Smoke dampers with no recent test
Fire damper testing for kitchens and businesses in Stanwell Moor
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. For spring-operated types, annual testing is the minimum. We carry out fire damper testing for buildings in Stanwell Moor and give you the records to show it’s been done. Typical jobs include fire damper items raised by an assessor and missing or out-of-date damper records, on riser dampers, fusible link fire dampers and offices and schools.
Somewhere as small as Stanwell Moor, fire dampers are normally found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
Each visit ends with a written report and pictures, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Stanwell Moor (TW19)
- Region
- Surrey
- Reporting
- Photo report after each visit
- Quote
- A fixed price before we start
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
What happens on the day
A visit follows the same order every time: sheeting and protection first, make the system safe, do the work, clear away and leave you the report. The visit itself takes from an hour or two in a small building to several visits on a large estate. If you can send pictures, we can arrive in Stanwell Moor knowing what to expect.
- First we check the schedule and the last set of results.
- We locate every damper and note any we cannot reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
How to prepare
- Let us know about permits to work or site inductions
- Mention any parking or loading restrictions
- Plan for cooking equipment or plant to be off before we arrive
Getting a quote
For fire damper testing in Stanwell Moor, ring 0345 646 2711 or email us. Tell us what kind of premises it is and when it’s open, plus photos or the previous report if they’re to hand. We usually send a fixed quote within one working day.
Read more
Between visits
Good habits slow the build-up between visits. Our tips:
- Diary the annual test well ahead
- Report leaks or condensation near ductwork quickly
- File every damper report where your assessor can find it
- Add new dampers to the register as they’re fitted
Dampers we couldn’t reach are listed with the reason, for example a missing panel or a covered hatch. Access panels can be fitted so those dampers are tested on the next visit.
Make sure every damper can be reached. If a damper has no access panel, have one fitted ahead of the next visit.
Fire damper testing in Stanwell Moor: local notes
The FSA’s food hygiene register lists about 4 hospitals, care homes and childcare premises and about 5 hotels and B&Bs with registered kitchens or food service in and around Stanwell Moor, up to about a mile and a half out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Stanwell Moor’s nearest hospital, Ashford Hospital, is about 2 miles south-east. Hospitals are a good example of a building with fire dampers across many floors and departments. Stanwell Moor is covered by Surrey Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
The nearest hospital, Ashford Hospital, is about 2 miles south-east; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly. If you manage a historic building in the area (Frogmore House is about 4.1 miles west), dampers fitted during conversions can be hard to reach and need recording.
Stanwell Moor is about 2 miles north of Staines-upon-Thames, in Surrey. Wherever you are in the TW19 postcode area, we can carry out fire damper testing at your premises. Across Surrey, we cover 395 places, and Stanwell Moor is one of them. Guildford is in our area too, about 15 miles from Stanwell Moor.
Here we cover the TW19 postcode area for fire damper testing. Local streets include Horton Road, Shellfield Close and Spout Lane, all of which we cover for fire damper testing. If your site is just outside Stanwell Moor, we cover Poyle (1 mile north-west), Horton (2 miles west), Colnbrook (2 miles north-west), Brands Hill (2 miles north-west) and Hythe End (2 miles south-west). We also work in nearby towns such as Guildford (15 miles south), Woking (11 miles south), Camberley (13 miles south-west), Epsom (13 miles south-east), Ewell (13 miles south-east) and Egham (3 miles south-west).
Landmarks near Stanwell Moor
Locally, jobs take us to businesses close to Arthur Jacob Nature Reserve, Wetherspoon Express pub and Thomas Knyvett College. The closest station to Stanwell Moor is Heathrow Terminal 5 Rail station, about 0.8 miles north-east. A little further out are Windsor Castle (4.7 miles west) and Spelthorne Museum (2.1 miles south). The countryside around Stanwell Moor includes Staines Reservoirs and St Ann's Hill.
Landlords, agents and facilities managers
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements and we’ll come back with a fixed quote.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Why deal with it now?
Until a damper has been dropped, you can’t say whether it works. A test gives you a clear answer, and we can offer remedials for any that fail, which is far easier to plan for. Rural sites cannot always move to another kitchen or room when something fails.
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote and give you a fixed price before work begins.
Why us?
- Ventilation hygiene specialists since 2009
- Out-of-hours work and a 24/7 emergency line
- Fixed quotes, normally within one working day
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Read how cleaning jobs are priced and our accreditations and certificates.
FAQs for Stanwell Moor
Can you work in Stanwell Moor outside opening hours?
Yes. We work evenings, overnight and at weekends. The work in Stanwell Moor can fit around your hours. When you phone us on 0345 646 2711 or drop us a line, mention when the site is quiet.
Who enforces fire safety at workplaces in Stanwell Moor?
It’s Surrey Fire and Rescue Service, which covers Stanwell Moor. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Whose job is it to make sure fire dampers are tested?
Under the Fire Safety Order 2005, it’s the responsible person, who might be the employer, owner, landlord, facilities manager or managing agent. They must keep fire safety measures, including dampers, in working order.
Do you survey before quoting?
Yes. We always survey first, either from photos and details you send or on a site visit. A fixed quote follows.
How do you protect the area?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. We tidy up and take our waste away before we leave.
Who is responsible for fire safety on the premises?
Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: often the employer, owner or occupier. Landlords, facilities managers and managing agents can also hold responsibility.
Is TR19 cleaning required by law?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and many insurers can refuse or reduce a claim without proof of cleaning.
How long will damper testing take?
Testing takes a couple of hours for a few dampers, and a day or more across a big site. Bigger sites can be phased, and you can call 0345 646 2711 or use the quote form to talk it through.
When it’s something else
In fairness, some problems need a different fix:
- Missing dampers that a designer needs to specify
- Approving the building’s fire strategy
- Designing the building’s fire compartments
If you’re not sure, just ring 0345 646 2711 or drop us a line and we will give you a straight answer.
What we work on in Stanwell Moor
- Hospitals and care homes
- Offices and schools
- Wall and floor dampers
- Riser dampers
- Fusible link fire dampers
- Motorised smoke dampers
Do you need fire damper testing in Stanwell Moor?
Over time, dust builds up on the blade, the runners and the spring. If the duct carries cooking vapour, a film of grease adds to it, and either one can hold the blade part-open.
Most sites get in touch when they notice something like this:
- Dust or grease build-up on damper blades
- Corroded dampers in damp risers and plant rooms
- Blades that jam part-way when released
- Smoke dampers that need testing through their controls
A school like Town Farm Primary School & Nursery can have any dampers tested over half-term without disturbing lessons.
What your quote should include
- Whether the whole system is included, or only the parts that are easy to reach
- When the next visit should be, and why
- Whether a survey comes first
- Whether the work can be done while the site is closed
What affects the quote in Stanwell Moor
The quote reflects the site in front of us. We consider:
- One-off work versus a regular cycle
- Travel, parking and unloading
- The size of the system
- Working hours and out-of-hours timing
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.
Asking for a quote
What to send for a quote:
- Detail shots of panels, filters and grilles
- Where the site is and what kind of site it is
- The roof, plant room or outside wall the system runs to
- When the site is open and when it’s quiet
To help us quote: where the site is, what it is and its opening hours, a few pictures and the last certificate or report, if there is one. Then call 0345 646 2711 or send us an email.