Surrey · Fire damper testing
Fire damper testing in Shipley Bridge, Surrey
Our technicians work in Shipley Bridge on fire damper drop testing and smoke damper testing, with a record for each damper. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Corroded dampers in damp risers and plant rooms
- Dirty dampers that may not close
- Damper actions from a fire risk assessment
Looking after it afterwards
So the system stays in good health:
- Keep to at least yearly testing
- File every damper report where your assessor can find it
- Keep cables and fixings away from damper blades
- Brief other trades about dampers in ceilings and risers
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. Anything they disturb should be checked again.
Clean ductwork means less dust and grease reaching the dampers. Duct cleaning and damper testing can be planned side by side.
Fire damper testing in Shipley Bridge
Each damper we test gets a location, a result and a note of its condition. Dampers that pass are reset and left open, ready to operate, while failures are flagged with what we found. That record belongs with the building’s fire safety paperwork. Typical jobs include dampers overdue for their annual drop test and dampers that can’t be reached without an access panel, on wall and floor dampers, offices and schools and riser dampers.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
We have been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Where
- Shipley Bridge (RH6)
- Wider area
- Surrey
- Reporting
- Photo report after every visit
- Quotes
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
What affects the cost of fire damper testing
We do not publish a price list, because no two systems are the same. What we look at:
- Site requirements such as sign-in and permits
- How many systems or sites are involved
- Access, including roofs, risers and ceiling voids
- The scale of the work
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
What to send for a quote
To speed up the quote, send us:
- Any access panels or hatches you can see
- The roof, plant room or outside wall the system runs to
- The site address and the type of premises
- Your opening hours and when the area is out of use
To help us quote: where the site is, what it is and its opening hours, pictures of the system and the last certificate or report, if there is one. Once you have those, phone us on 0345 646 2711 or use the quote form.
Why it’s worth doing now in Shipley Bridge
Putting testing off does not change whether the dampers will close; it just means you do not know. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. Planning a trip to Shipley Bridge ahead is easier for everyone than a rushed one.
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, phone us on 0345 646 2711, or send details by email and we will give you an honest view and a fixed quote.
What you get with us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- CHAS and SafeContractor accredited, with ISO 9001
- Fully insured
- One number for every site across the South East and London
See our cost guide and how to check a contractor.
Shipley Bridge buildings and fire safety
Food Standards Agency records list about 3 schools, colleges and universities, about 7 care, childcare and hospital premises and about 3 hotels and B&Bs registered as food businesses within about 1.5 miles of central Shipley Bridge. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Shipley Bridge sits within the area of Surrey Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. About 2.7 miles south-west of Shipley Bridge is Langley Green Hospital, the nearest hospital. Hospitals are a good example of a building with fire dampers across many floors and departments.
For schools like Forge Wood Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Shipley Bridge is about 2 miles south-east of Horley, in Surrey. We carry out fire damper testing for businesses, landlords and public buildings in Shipley Bridge and the rest of Surrey. Across Surrey, we cover 395 places, Shipley Bridge among them. Our Guildford page covers sites nearby, about 20 miles away.
Our technicians cover all of RH6 for fire damper testing and the roads nearby. That includes premises on Antlands Lane, Antlands Lane East and Peeks Brook Lane and the roads around them. Close by, we work in Burstow (1 mile north-east), Fernhill (1 mile north), Tinsley Green (1 mile south-west), Copthorne (1 mile south-east) and Forge Wood (1 mile south-west). Larger places within reach include Epsom (14 miles north-west), Redhill (6 miles north), Ewell (15 miles north), Reigate (7 miles north-west), Caterham (10 miles north) and Dorking (10 miles north-west).
Near you in Shipley Bridge
Around Shipley Bridge, our work takes us to kitchens and buildings near Oakwood School, Worth Park Gardens and The Gatwick School, among other places. The closest station to Shipley Bridge is Gatwick Airport station, about 1.2 miles north-west of the centre. Nearby you will also find Effingham Park Motor Museum (2.1 miles east) and County Mall (3.2 miles south-west). Not far away are Hedgecourt Lake.
Do you need fire damper testing in Shipley Bridge?
Corrosion is another common cause of failure. Condensation, leaks and damp plant rooms corrode the parts that need to move, and the damper can seize quietly where no one sees it.
Clients normally contact us when they notice one of these:
- Dampers clogged with dust or grease
- Missing or out-of-date damper records
- Dampers affected by leaks or condensation
- Dampers that stick or will not close fully
Hospitals such as Langley Green Hospital, about 2.7 miles south-west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Shipley Bridge, the same annual testing applies.
Questions to ask before you book
- How they set the interval to the next visit
- When they can work, and whether that is outside your opening hours
- Whether the quote is based on a survey or photos
- Whether they’re fully insured
When it’s something else
To be straight with you, some problems need a different fix:
- Holes around ductwork in fire-resisting walls
- Faults in the alarm or building controls that signal smoke dampers
- Signing off a building’s overall fire safety
If in doubt, phone us on 0345 646 2711 or use the quote form and we will say what we think before you book.
What the work covers
- Fusible link fire dampers
- Motorised smoke dampers
- Hospitals and care homes
- Wall and floor dampers
- Offices and schools
- Riser dampers
Also near Shipley Bridge
Also in Shipley Bridge
How it works
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes anything from a couple of hours for a handful of dampers to a full day for a large building, and we clear up before we go. We agree a date with you, plan the drive to Shipley Bridge and turn up when the site is quiet.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Before we arrive
- Let us know about permits to work or site inductions
- Tell us where we can park and unload
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Ask for a quote
If you need fire damper testing in Shipley Bridge, call 0345 646 2711, or send details by email. Let us know the site type and the opening hours, and send pictures or your last report if you can. We usually send a fixed quote within one working day.
Advice
FAQs for Shipley Bridge
Can the work in Shipley Bridge be done at night or at weekends?
Yes, we can come after you close and finish before you open. It means the site in Shipley Bridge keeps running as normal. When you call us on 0345 646 2711 or drop us a line, mention when the site is quiet.
Which fire and rescue service is responsible for Shipley Bridge?
That’s Surrey Fire and Rescue Service. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Do you work with multi-site operators?
Yes. Send the list of sites and the work at each and you will get one fixed quote.
Can you set up regular visits?
Yes, of course. Tell us what you have and how it’s used, and we will suggest a schedule and quote for it.
Where does the waste go?
It’s contained and taken away. We collect grease, debris and waste water as we go rather than letting it spread.
How long does fire damper testing take?
As a guide, it takes from an hour or two in a small building to several visits on a large estate. The number of dampers and how they’re reached decide the rest.
Is TR19 cleaning required by law?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and without records, many insurers may refuse or reduce a claim.
Is there a survey before the work?
Yes. We always survey first, either from pictures and details you send or on a site visit. A fixed quote follows.
Different parts, different methods
Ceiling voids and risers
Ceiling voids are where lots of dampers end up. Ceiling tiles are lifted for access and replaced afterwards.
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, with no classes to work around.