East Sussex · Fire damper testing
Salehurst fire damper testing
Our technicians work in Salehurst on fire damper testing. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Rusted damper blades and springs
- Fire dampers nobody can get to
- Fire dampers that fail to drop shut
Managing agents and facilities teams in Salehurst
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we will come back with a fixed quote.
Facilities teams in offices, schools and healthcare sites book us too across East Sussex. Work can be phased by floor, building or site to keep disruption down.
Fire damper testing in Salehurst
Smoke dampers work differently from fire dampers. A smoke damper is driven by a motor and responds to signals from its controls, so we test them by operating them through those controls and confirming every blade travels fully and comes back. Common call-outs are for dust or grease build-up on damper blades and corroded dampers in damp risers and plant rooms, across motorised smoke dampers, wall and floor dampers and fusible link fire dampers.
Testing in a small place like Salehurst is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
The paperwork matters as much as the work. You get a written report with pictures after every visit, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Where
- Salehurst (TN32)
- Region
- East Sussex
- Records
- Photo report after every visit
- Quotes
- A fixed quote up front
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Places near Salehurst
Also in Salehurst
What fire damper testing cannot fix
Fire damper testing cannot fix everything, and we’ll tell you before work begins. It does not solve:
- Fire risk assessments, which need a fire risk assessor
- Fire-stopping gaps around the duct where it passes through the wall
- Ductwork crossing a fire wall with no damper fitted
Not sure which it is? You can phone us on 0345 646 2711 or send us an email and we will tell you honestly before you book.
What we work on in Salehurst
- Offices and schools
- Hospitals and care homes
- Fusible link fire dampers
- Wall and floor dampers
- Motorised smoke dampers
- Riser dampers
What staff can safely do
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
Part by part
Access panels
Where there’s no access panel, we record the damper as not tested and say why. We can fit access panels so it’s tested next time.
Offices and retail
Multi-let buildings may have dampers inside tenant areas. We agree access with the managing agent before the visit.
FAQs for Salehurst
Who is the fire and rescue service for Salehurst?
East Sussex Fire and Rescue Service is the fire and rescue service for Salehurst. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Will you come out to Salehurst?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How much notice should we give?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.
Which kinds of sites do you work on?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
What information do you need?
Some photos and a quick description of the system plus the address and your hours. If we need more, we will ask.
Do you carry out smoke damper testing?
Yes. Every smoke damper is driven through its controls and checked for full movement. Where a controls contractor needs to be involved, we arrange it with you.
Do we need to close while you work?
Not normally. Visits are timed for when the area is closed, such as overnight or at a weekend, so you keep your normal hours.
Fire damper testing in Salehurst: local notes
At about 43 miles from central London, Salehurst sits well inside the area we cover. A survey and a fixed quote come first, then the visit at a time that suits you. Fire safety in Salehurst falls to East Sussex Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
Healthcare buildings such as Ticehurst House Hospital (about 5.6 miles north-west) rely on fire compartments, and the dampers in them need testing at least annually. A school like Salehurst Church of England Primary School can have any dampers tested over half-term without disturbing lessons.
Salehurst is about 9 miles north of Hastings, in East Sussex. From the centre of Salehurst to the outskirts, we cover fire damper testing for every kind of premises, from small sites to large estates. Salehurst is one of 289 towns, villages and districts in East Sussex we cover for commercial clients. You can also see our page for Maidstone, about 19 miles away.
All of TN32 is covered for fire damper testing, from the main roads to the quietest streets. If your site is just outside Salehurst, we cover Northbridge Street (1 mile west), Robertsbridge (1 mile south-west), John's Cross (2 miles south), Mountfield (3 miles south) and Oxley's Green (4 miles south-west). Larger places within reach include Hastings (9 miles south), Bexhill-on-Sea (10 miles south), Hailsham (13 miles south-west), Crowborough (15 miles west), St Leonards (10 miles south) and Hastings Old Town (10 miles south-east).
What’s near Salehurst
Typical jobs here are in premises near The Salehurst Halt Public House and Robertsbridge Community College, among other places. Salehurst’s nearest station is Robertsbridge station, about 1 mile south-west of the centre. Other landmarks nearby include Ticehurst House Hospital (5.6 miles north-west).
How it works
Every visit runs to the same pattern: protect the area, make the system safe, do the work, tidy up and leave you the report. On site, the work takes a couple of hours for a few dampers, and a day or more across a big site. If you can send photos, we can arrive in Salehurst knowing what to expect.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Have your last certificate or report to hand
- Let us know about parking and loading
Ask for a quote
If you need fire damper testing in Salehurst, call 0345 646 2711, or send details by email. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. A fixed quote normally follows within one working day.
Read more
What we are called out for in Salehurst
Corrosion is another common cause of failure. Condensation, leaks and damp plant rooms corrode the parts that need to move, and the damper can seize quietly where no one sees it.
Most sites get in touch after spotting one of these:
- Motorised smoke dampers due for testing
- Gaps in the fire damper test log
- Fire dampers that haven’t been tested for over a year
- Dust or grease build-up on damper blades
Historic houses near Salehurst, with Durhamford Manor about 3.7 miles south, are a reminder that older buildings can hold dampers in unexpected places.
Questions to ask before booking
- How areas they can’t reach will be recorded
- Which accreditations they hold, and whether you can check them
- How they set the interval to the next visit
- How VAT is shown on the quote
How we price fire damper testing
A fixed price needs a few facts first. We look at:
- How big the system is
- How many systems or sites are involved
- Whether it’s a one-off visit or part of a schedule
- Parking and loading at the site
The cost depends on how big the system is, the condition it’s in and access to every part of it. You get a fixed price before any work starts, so you know where you stand.
What we need to know
Photos let us diagnose from a distance. The most useful are:
- The paperwork from the last visit, if you have it
- The site address and the type of premises
- When the site is open and when it’s quiet
- The roof, plant room or outside wall the system runs to
For a fixed quote, ring 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We normally come back within one working day.