Surrey · Fire damper testing
Fire damper testing in Runfold, Surrey
Fire damper testing across Runfold and nearby, timed so the site keeps working and signed off in writing with pictures.
- Fire dampers that haven’t been tested for over a year
- Dampers flagged on a fire risk assessment
- Corroded dampers in damp risers and plant rooms
Multi-site and managed buildings
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with photos.
We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed quote.
Fire damper testing in Runfold, done properly
Some dampers haven’t been tested since the day they went in. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We find what we can, test what we can reach and list anything we cannot get to, so you know where the gaps are. If you have dust or grease build-up on damper blades and corroded dampers in damp risers and plant rooms, we can put it right, from hospitals and care homes, offices and schools and motorised smoke dampers onwards.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, where the dampers are easy to overlook. A first test normally starts with finding them all.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Location
- Runfold (GU10, GU9)
- Region
- Surrey
- Records
- Photo report after every visit
- Quote
- A fixed price before work begins
- Hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Runfold: your questions answered
Do you work overnight in Runfold?
Yes, nights and weekends are routine for us. The site is handed back ready to open. When you phone us on 0345 646 2711 or drop us a line, mention when the site is quiet.
Who enforces fire safety at workplaces in Runfold?
It’s Surrey Fire and Rescue Service, which covers Runfold. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
How do you deal with dampers that cannot be reached?
Any damper we can’t reach is listed on the report so nothing is quietly missed. An access panel tends to solve it, and we can quote to fit one.
Can you look after several sites?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Each site gets its own report and pictures.
Will we get a certificate for the dampers?
You get a test report recording every damper we tested, with its location, its result and any faults. Keep it with your fire safety records.
Is TR19 a legal requirement?
Not in itself. Insurers, fire officers and EHOs look to TR19® as the benchmark, and many insurers ask for proof of cleaning to it. The law behind it is the Fire Safety Order 2005 in England and Wales.
What does fire damper testing cost?
The cost depends on the size of the system, its condition, access and timing. Call for a fixed quote and we will typically reply within one working day.
Is Runfold in your area?
Yes. We cover Runfold and the rest of Surrey, as part of our work across South East England and London. To book, give us a ring on 0345 646 2711 or use the quote form.
Places near Runfold
More services for Runfold
Fire damper testing in Runfold: local notes
The FSA’s food hygiene register lists about 4 schools, colleges and universities and about 7 caring premises (care homes, nurseries and hospitals) with registered kitchens or food service within about 1.5 miles of central Runfold. If any of them has ducted ventilation, its dampers need an annual drop test at least. Runfold, about 35 miles from central London, is within our usual area. Evening, overnight and weekend visits are all possible. Surrey Fire and Rescue Service covers Runfold. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
For schools like South Farnham School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Runfold is about 2 miles east of Farnham, in Surrey. From the centre of Runfold to the outskirts, fire damper testing is available to all kinds of commercial premises, from a single unit to a large public building. Our Surrey coverage runs to 395 places, and Runfold is one of them. We also work in Guildford, around 8 miles away.
Fire damper testing in GU10 and GU9 is surveyed, quoted and booked the same way as anywhere else. We cover sites on Greenacres, Crooksbury Road and Compton Way and the roads around them. We also cover the places around Runfold: Compton (1 mile west), The Sands (1 mile east), Sandy Cross (1 mile north-east), Badshot Lea (1 mile north) and Seale (2 miles north-east). Within a short drive, we also cover Guildford (8 miles east), Woking (11 miles north-east), Camberley (9 miles north), Frimley (7 miles north), Haslemere (9 miles south) and Cranleigh (13 miles east).
Near you in Runfold
We work in commercial kitchens and buildings around Crooksbury Hill. Runfold’s nearest station is Farnham station, roughly 1.7 miles west. A little further out are Farnham Castle (2.2 miles west) and Museum of Farnham (2.2 miles west). For a walk, there’s Culverswell Hill and Aunt's Pool.
Different parts, different methods
Schools, hospitals and care homes
Where residents can’t easily get out, holding fire and smoke back matters even more. Annual damper testing is part of keeping that in place.
Fusible link fire dampers
A damaged or painted link can stop a damper doing its job. Each link is looked at as part of the test and any problems go on the report.
How it works
We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. A few photos of the system help us make the most of a visit to a place like Runfold.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Tell us about site rules, permits or sign-in
- Let us know how we reach the system, including roofs, risers and plant rooms
- Clear loose items from the work area
How to get a quote
We don’t publish a price list, because every site is different. Instead, we look at your site first, from photos or a survey, then send a fixed quote. To get going, phone us on 0345 646 2711, or email photos.
Related advice
What fire damper testing cannot fix
We will always give you a straight diagnosis, so here’s what fire damper testing won’t do:
- Control wiring problems outside the damper itself
- Designing the building’s fire compartments
- Missing dampers that a designer needs to specify
If you are not sure, just call us on 0345 646 2711 or email us and we’ll give you a straight answer before you book.
What we work on in Runfold
- Offices and schools
- Riser dampers
- Hospitals and care homes
- Motorised smoke dampers
- Wall and floor dampers
- Fusible link fire dampers
Do you need fire damper testing in Runfold?
Over time, dust builds up on the blade, the runners and the spring. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
Signs it’s time to call us include:
- Smoke dampers that need testing through their controls
- Dust or grease build-up on damper blades
- Fire dampers with no recent test record
- Fire dampers that fail to drop shut
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Farnham Castle is about 2.2 miles west), finding every damper is the first job.
Before you book anyone
- Which accreditations they hold, and whether you can check them
- Whether the work can be done while the site is closed
- Whether VAT is included
- Whether the figure could change on the day
Aftercare tips
So the system stays in good health:
- Book the next test before the year runs out
- Keep damper test reports with the fire safety log
- Keep ceiling hatches and duct panels easy to open
- Tell contractors where dampers are before they start work
Pass the report to whoever keeps your fire risk assessment up to date, so the assessment reflects where the dampers stand. Faults on the report are worth closing off quickly.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Corrosion is a common reason blades stick.
Why act early in Runfold
Leaving damper testing for another year does not make the dampers any more likely to work. BESA guidance is to test at least annually, and a skipped year leaves a hole in your records as well. It’s simpler to plan the work at Runfold now than to arrange it in a hurry later.
The cost depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before we start, so you know where you stand.
Why Runfold businesses choose us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Survey first, then a fixed quote
- Evenings, overnight and weekends, plus 24/7 emergency callout
- A fixed price before any work starts