Hampshire · Fire damper testing
Fire Damper Testing in Rockbourne
Fire damper testing for businesses, landlords and public buildings in Rockbourne. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Rusted damper blades and springs
- Smoke dampers with no recent test
- Dirty dampers that may not close
Honest limits
We’ll always give you a straight diagnosis, so here’s what this work can’t put right:
- Holes around ductwork in fire-resisting walls
- Deciding where dampers should be fitted
- Control wiring problems outside the damper itself
Not sure which it is? You can call us on 0345 646 2711 or email us and we will tell you honestly.
What the work covers
- Hospitals and care homes
- Fusible link fire dampers
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Offices and schools
Fire damper testing for kitchens and businesses in Rockbourne
For every damper, we record where it is, whether it passed and the state it’s in. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. The work covers offices and schools, hospitals and care homes and fusible link fire dampers, and people most often call us about dampers hidden with no access panel or hatch and dampers affected by leaks or condensation.
In a village or hamlet like Rockbourne, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Rockbourne (SP6)
- Region
- Hampshire
- Reporting
- Photo report after each visit
- Price
- A fixed price before we start
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
More services for Rockbourne
What fire damper testing looks like in Rockbourne
Salisbury District Hospital is the nearest hospital, about 6 miles north of Rockbourne. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Rockbourne is covered by Hampshire and Isle of Wight Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
The nearest hospital, Salisbury District Hospital, is about 6 miles north; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly. For schools like Western Downland Church of England Aided Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Rockbourne is in Hampshire. Sites in Rockbourne get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. Across Hampshire, we cover 683 places, Rockbourne among them. There’s also a page for Southampton, roughly 20 miles from Rockbourne.
Every address in SP6 is covered for fire damper testing, from busy streets to back roads. Nearby, we also carry out fire damper testing in Whitsbury (1 mile north-east), Damerham (2 miles south), Sandleheath (2 miles south), Ashford (3 miles south-east) and Alderholt (4 miles south). Larger places within reach include Totton (15 miles east), Ringwood (9 miles south), Fordingbridge (3 miles south-east), St Leonards (9 miles south), Brockenhurst (15 miles south-east) and Poulner (8 miles south).
What’s near Rockbourne
Around Rockbourne, our work takes us to kitchens and buildings near The Cart Wheel Public House and the streets around them. A little further out are Fordingbridge Museum (3.3 miles south-east) and Godshill Castle Hill (3.5 miles south-east).
Part by part
Access panels
Access panels sometimes get painted over, screwed shut or hidden by new ceilings. Clear access makes the test quicker and less disruptive.
Smoke dampers
A smoke damper is opened and closed by a motor, not a link. We test them through their controls and check each blade travels fully.
What we do, step by step
Your staff don’t need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Before we leave, the area is tidied and the paperwork follows. If you can send photos, we can arrive in Rockbourne knowing what to expect.
- We start with whatever records exist: registers, drawings or old reports.
- Dampers are located one by one and reached through their access panels.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Let us know when the site is closed or quiet
- Make sure equipment near the work can be switched off and left to cool
- Name a contact who can let us in at the agreed time
Getting a quote
We don’t publish a price list, because every site is different. Instead, we look at your site first, from photos or a survey, then send a fixed quote. To get going, call 0345 646 2711 or use the quote form.
Advice
Multi-site and managed buildings
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
Keeping the system healthy
So the system stays in good health:
- Get remedials done soon after a failed test
- Never wedge or tie a damper open
- Update the register when ductwork changes
- Keep an eye out for damp around dampers
If we couldn’t get to a damper, the report says so and why, such as no access panel or a blocked hatch. Access panels can be fitted so those dampers are tested on the next visit.
Deal with leaks and condensation near dampers quickly. Rusted parts are one of the main reasons dampers fail to close.
What affects the quote in Rockbourne
You will get a fixed price before we start. It takes into account:
- Access, including roofs, risers and ceiling voids
- Working hours and out-of-hours timing
- The condition of the system
- One-off work versus a regular cycle
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
What to send for a quote
When you call or email, these details help:
- The site address and the type of premises
- The times we could work without disrupting the site
- Problems your staff have spotted
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Getting a quote does not take long. Call or email with a few details and you will normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Common questions in Rockbourne
Which fire and rescue service is responsible for Rockbourne?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Rockbourne. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Can you work in Rockbourne outside opening hours?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Let us know the hours you’re closed and we will book within them.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’ve been trading since 2009 and we’re fully insured.
How much does fire damper testing cost in Rockbourne?
Size, condition, access and working hours all affect the cost. Call for a fixed quote and we’ll normally reply within one working day.
Can you look after several sites?
Yes. Send the list of sites and the work at each and we will quote them together.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used, and we’ll suggest a schedule and quote for it.
What paperwork do we get after testing?
The record we give you is a report of the tests for every damper on the visit. Any failures come with a note of the remedials needed.
Who has the legal duty for fire safety?
In the words of the Fire Safety Order 2005, it’s the responsible person. That is generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. Your lease and fire risk assessment should make it clear.
Common problems we fix in Rockbourne
Other trades work around dampers all the time. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
What we’re most often called out for:
- Dampers flagged on a fire risk assessment
- Dampers clogged with dust or grease
- Blades that jam part-way when released
- Dampers hidden with no access panel or hatch
If you manage a historic building in the area (Breamore House is about 2.4 miles east), dampers fitted during conversions can be hard to reach and need recording.
What your quote should include
- If they look at the system before pricing
- Whether inaccessible sections are listed on the report
- What records you will receive afterwards
- Which accreditations they hold, and whether you can check them