Hampshire · Fire damper testing
Sandleheath fire damper testing
We cover Sandleheath for fire damper testing. Fixed quotes, work around your opening hours and photo reports as standard.
- Dampers affected by leaks or condensation
- Fire dampers nobody can get to
- Dampers overdue for their annual drop test
Fire damper testing for kitchens and businesses in Sandleheath
BESA guidance is that fire dampers should be tested by a competent person when they’re installed and at least annually after that. Spring-operated dampers need testing every year as a minimum. Our job is to do the testing and hand you the paperwork that shows it. Common call-outs are for fire dampers that fail to drop shut and corroded dampers in damp risers and plant rooms, across motorised smoke dampers, riser dampers and hospitals and care homes.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. A first test typically starts with finding them all.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Place
- Sandleheath (SP6)
- Region
- Hampshire
- Paperwork
- Written report with photos
- Quotes
- Fixed quote, usually within a working day
- Hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Leave it or put it right?
Faults found early are often simpler to put right. Years of corrosion and dirt can mean the whole damper needs replacing instead. Somewhere as small as Sandleheath, losing a kitchen or building to a fault is felt by everyone who uses it.
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before work begins.
Why book with us
- CHAS, SafeContractor and ISO 9001
- One contact for all your sites in London and the South East
- Trading since 2009
- A fixed price before any work starts
What the work involves, part by part
Fusible link fire dampers
The link has to be in good order for the damper to work. We check its condition during the test and note anything that is not right.
Smoke dampers
Because they’re linked to controls, smoke damper tests can need some coordination. We agree the arrangements with you in advance.
When something else is needed
We will always give you a straight diagnosis, so here’s what fire damper testing will not do:
- Fire-stopping gaps around the duct where it passes through the wall
- Faults in the alarm or building controls that signal smoke dampers
- Deciding where dampers should be fitted
Not sure which it is? You can call us on 0345 646 2711 or drop us a line and we’ll tell you honestly.
Parts of the system we cover
- Wall and floor dampers
- Fusible link fire dampers
- Offices and schools
- Motorised smoke dampers
- Riser dampers
- Hospitals and care homes
What staff can safely do
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, they should report it rather than try to fix it. We can diagnose it and quote.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.
What we do, step by step
Every visit runs to the same pattern: protect the area, make the system safe, do the work, tidy up and leave you the report. On site, the work takes a couple of hours for a few dampers, and a day or more across a big site. For a village or hamlet like Sandleheath, tell us about narrow lanes, gates and parking when you book.
- We start with whatever records exist: registers, drawings or old reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- You get a report listing each damper, its result and any remedials needed.
How to prepare
- Mention any sign-in, permit or induction we need
- Arrange a key holder or contact on site
- Mention any parking or loading restrictions
How to get a quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.
Read more
Sandleheath buildings and fire safety
Food Standards Agency data includes about 4 hospitals, care homes and childcare premises within roughly a mile and a half of the centre of Sandleheath. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. Sandleheath sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
Historic houses near Sandleheath, with Breamore House about 3.1 miles north-east, are a reminder that older buildings can hold dampers in unexpected places. School buildings such as The Burgate School and Sixth Form are normally tested in the holidays, wherever they have dampers.
Sandleheath is in Hampshire. For fire damper testing in and around Sandleheath, please ring 0345 646 2711 or email us for a fixed quote. Our area covers London and the South East, Sandleheath included. Across Hampshire, we cover 683 places, Sandleheath among them. There’s also a page for Southampton, roughly 19 miles from Sandleheath.
Here we cover the SP6 postcode area for fire damper testing. That includes premises on Elms Close, Main Road and Old Brickyard Road and the roads around them. Neighbouring places we cover for fire damper testing include Ashford (1 mile east), Alderholt (1 mile south), Damerham (1 mile north-west), Rockbourne (2 miles north) and Broxhill (2 miles south-west). We also work in nearby towns such as Totton (14 miles east), Romsey (15 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south-east) and Ashley (14 miles south-east).
Near you in Sandleheath
Nearby you’ll also find Fordingbridge Museum (1.5 miles east) and Godshill Castle Hill (2.7 miles east). The countryside around Sandleheath includes Blashford Lakes.
Sandleheath questions
Who is the fire and rescue service for Sandleheath?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Sandleheath. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Will you come out to Sandleheath?
Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.
What if a fire damper won’t close?
The failure goes on the report, along with what caused it, such as a sticking blade, corrosion or a damaged link. Remedials are offered, either a repair or a replacement damper, and test it again afterwards.
How long will damper testing take?
Testing takes from an hour or two in a small building to several visits on a large estate. Large buildings can be split over several visits, and you can phone us on 0345 646 2711 or email us to talk it through.
Can you come out in an emergency?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
How much does fire damper testing cost?
We do not publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before work begins.
What does TR19 mean?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Can one contract cover all our sites?
Yes. We work across South East England and London, so we can schedule a run of sites on one programme. Each site gets its own report and photos.
Looking after it afterwards
Aftercare is simple, and it helps at the next visit:
- Tell contractors where dampers are before they start work
- Get remedials done soon after a failed test
- Add new dampers to the register as they’re fitted
- Make sure access panels stay clear and usable
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. If a damper has been disturbed, have it tested again.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Corrosion is a common reason blades stick.
What affects the quote in Sandleheath
Sites vary more than people expect. The main factors:
- The scale of the work
- One-off work versus a regular cycle
- When the work can happen, such as evenings, overnight or weekends
- Access, including roofs, risers and ceiling voids
Several systems or sites on one quote can make for a more efficient booking. Tell us about everything you’d like looked at, and you will get one fixed quote.
Helping us quote
When you call or email, these details help:
- The site address and the type of premises
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- When the site is open and when it’s quiet
- A few general shots of the system
To get a fixed quote, give us a ring on 0345 646 2711, or email photos and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will typically have a quote within one working day.