Oxfordshire · Fire damper testing
Fire damper inspection in Remenham Hill
We cover Remenham Hill for fire damper testing. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Fire dampers with no recent test record
- Dampers hidden with no access panel or hatch
- Fire dampers that fail to drop shut
Managing agents and facilities teams in Remenham Hill
We regularly work with managing agents. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept on a regular cycle.
Fire damper testing for kitchens and businesses in Remenham Hill
A drop test is simple in principle: the blade is released, checked for a full close and reset. We test dampers for sites in Remenham Hill and the rest of Oxfordshire, keeping a log for each damper so there’s a history to look back on. The work covers hospitals and care homes, riser dampers and offices and schools, and people most often call us about fire dampers that haven’t been tested for over a year and fire damper items raised by an assessor.
In a village or hamlet like Remenham Hill, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Remenham Hill (RG9)
- Wider area
- Oxfordshire
- Records
- Written report with photos
- Quotes
- A fixed quote up front
- Working hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Remenham Hill buildings and fire safety
The FSA’s food hygiene register lists about 3 schools, colleges and universities and about 6 caring premises (care homes, nurseries and hospitals) with registered kitchens or food service across Remenham Hill and its immediate surroundings (about a mile and a half). Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Fire safety in Remenham Hill falls to Oxfordshire Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. About 5.1 miles north-east of Remenham Hill is Marlow Community Hospital, the nearest hospital. Where patients or residents may need help to leave a building, working dampers matter all the more.
Healthcare buildings such as Marlow Community Hospital (about 5.1 miles north-east) rely on fire compartments, and the dampers in them need testing at least annually. A school like Rupert House School can have any dampers tested over half-term without disturbing lessons.
Remenham Hill is about 5 miles south-west of Marlow, in Oxfordshire. Anywhere in RG9, we can carry out fire damper testing at your premises. Our area takes in 443 places across Oxfordshire, large and small. Reading is in our area too, about 8 miles from Remenham Hill.
Postcode districts we cover here for fire damper testing: RG9. That includes premises on White Hill and Aston Lane and the roads around them. We also cover the places around Remenham Hill: Aston (1 mile north), Remenham (1 mile north-west), Mill End (1 mile north), Cockpole Green (1 mile south-east) and Medmenham (2 miles north-east). We also work in nearby towns such as Thame (15 miles north), Benson (11 miles north-west), Chinnor (11 miles north), Tilehurst (9 miles south-west), Wallingford (12 miles west) and Little Heath (9 miles south-west).
Around Remenham Hill
Typical jobs here are in premises near Gillotts School, Mill Meadows and Flower Pot Hotel. For rail, the closest station is Henley-On-Thames station, roughly 1.1 miles west of the centre. Other landmarks nearby include Frazer Nash Archives (1.1 miles south-west) and Marlow Community Hospital (5.1 miles north-east). Green spaces nearby include Weycock Hill and Hurley Chalk Pit.
What a clean won’t put right
Before you book, it helps to know what’s not included:
- Control wiring problems outside the damper itself
- Designing the building’s fire compartments
- Signing off a building’s overall fire safety
Not sure which it is? You can ring 0345 646 2711 or send us an email and we will tell you honestly before you book.
Parts of the system we cover
- Offices and schools
- Riser dampers
- Wall and floor dampers
- Motorised smoke dampers
- Hospitals and care homes
- Fusible link fire dampers
Also near Remenham Hill
What else we do in Remenham Hill
Different parts, different methods
Schools, hospitals and care homes
In schools and colleges, testing fits well into holidays and weekends, with no classes to work around.
Ceiling voids and risers
Many dampers sit above suspended ceilings. Ceiling tiles are lifted for access and replaced afterwards.
Remenham Hill: your questions answered
Can you test school fire dampers in Remenham Hill out of term?
Yes, holiday work suits schools best. Food Standards Agency records list about 3 schools, colleges and universities with registered kitchens within about a mile and a half of Remenham Hill. Tell us your holiday dates and we’ll book the visit for when the site is empty.
Who enforces fire safety at workplaces in Remenham Hill?
Remenham Hill is in the area of Oxfordshire Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
What do you need from me for a quote?
Where the site is, what it is and when it’s open, along with a few photos and any previous report.
How do you keep the site clean during the work?
We cover floors and nearby surfaces with sheeting before we start, and anything we remove is contained. At the end, the area is cleaned down.
Are you fully insured?
Yes, fully. We also hold CHAS and SafeContractor, for sites that check contractor safety.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.
Do you have a 24/7 line?
Yes, day and night, every day of the year. Office hours are Monday to Friday, 8am to 6pm, and the emergency line covers the rest.
Can you price the work without visiting?
Often, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
How it works
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. The visit takes a morning or an afternoon for a small number of dampers, longer where there are many. For a village or hamlet like Remenham Hill, tell us about narrow lanes, gates and parking when you book.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
Getting ready for the visit
- Arrange a key holder or contact on site
- Mention any parking or loading restrictions
- Clear loose items from the work area
Getting a quote
Getting a quote does not take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
Staff cleaning versus specialist work
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, they should report it rather than try to fix it. We can diagnose it and quote.
Common problems we fix in Remenham Hill
Over the life of a building, owners, tenants and contractors come and go, and the damper records do not always go with them. Without a register, nobody knows how many dampers there are or when they were last tested.
Clients typically contact us when they notice something like this:
- Blades that jam part-way when released
- Fire dampers nobody can get to
- Dust or grease build-up on damper blades
- Damper actions from a fire risk assessment
Greenlands, about 1.7 miles north, is one of the historic houses near Remenham Hill, and older buildings converted to new uses often have ventilation added later.
What to look for in a quote
- How VAT is shown on the quote
- If the quote is a fixed price or an estimate
- When the next visit should be, and why
- When they can work, and whether that’s outside your opening hours
How we price fire damper testing
A fixed price needs a few facts first. We check:
- Whether it’s a one-off visit or part of a schedule
- Site requirements such as sign-in and permits
- The size of the system
- Access, including roofs, risers and ceiling voids
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
What we need to know
To speed up the quote, please include:
- Your opening hours and when the area is out of use
- A few general shots of the system
- Your last certificate, test record or report
- Detail shots of panels, filters and grilles
Every quote begins with a look at the system, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before we start.