Greater London · Fire damper testing
Fire Damper Testing in Putney
Fire damper testing for Putney and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Dirty dampers that may not close
- Fire dampers that haven’t been tested for over a year
- Dampers affected by leaks or condensation
About our fire damper testing in Putney
For every damper, we record where it is, whether it passed and the state it’s in. Passes are reset and left ready to work, and any that fail are listed with the reason. You end up with a clear record to keep with your fire safety documents. Typical jobs include fire dampers that haven’t been tested for over a year and dampers that can’t be reached without an access panel, across hospitals and care homes, offices and schools and riser dampers.
Damper testing in London buildings is normally planned around the people in them, so it’s often done out of hours or one zone at a time. We agree access to ceilings, risers and plant rooms with the building before any work starts.
The sign-off is always in writing: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Putney (SW15, SW19, SW13)
- Region
- Greater London
- Reporting
- Report and pictures after the visit
- Quotes
- A fixed price before work begins
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
What we do, step by step
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. The visit takes a few hours for a single floor, with bigger buildings phased over more than one visit. If your building in Putney has sign-in rules, permits or key holders, mention them when you book.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Have your last certificate or report to hand
- Allow time for equipment near the work to be turned off and cool down
- Mention any parking or loading restrictions
Get a fixed quote
Some systems can be priced from pictures; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
Advice
What your team can do, and what needs us
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Landlords, agents and facilities managers
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements and we’ll come back with a fixed quote.
Multi-site operators often want one contractor and one number. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
Towns and villages near Putney
More services for Putney
Questions from Putney
Is parking a problem for work in Putney?
A loading bay, a visitor permit or off-street space near the site in Putney makes the visit easier to plan. Where restrictions apply in the day, an evening or overnight visit normally gets round them.
Can you work in Putney outside opening hours?
Yes, evening, overnight and weekend work is normal for us. It means the site in Putney keeps running as normal. Let us know the hours you’re closed and we will book within them.
What do you do with what you remove?
Anything we remove is contained as we work and taken away with us, from grease and debris to used cleaning water. None of it is left on site.
Is Putney in your area?
Yes. We cover Putney and the rest of Greater London, within our South East and London area. For a fixed quote, phone us on 0345 646 2711 or drop us a line.
Is there a survey before the work?
Yes, every time. We diagnose before we treat: the survey shows what needs doing and what access we need, and the quote is based on that.
Whose job is it to make sure fire dampers are tested?
The duty falls on the responsible person for the premises. That is often the employer, owner, landlord, facilities manager or managing agent. Our part is the testing and the records that show it’s been done.
How often does BESA say fire dampers should be tested?
At least once a year, under BESA guidance, plus a test when the damper is first installed. Your fire risk assessment may call for some dampers to be tested more often.
What is TR19?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It sets out inspection, cleaning and record keeping, and it takes a risk-based approach.
Fire damper testing around Putney
The FSA’s food hygiene register lists about 43 schools, colleges and universities, about 66 caring premises (care homes, nurseries and hospitals) and about 5 hotels and B&Bs with registered kitchens or food service across Putney and its immediate surroundings (about a mile and a half). If any of them has ducted ventilation, its dampers need an annual drop test at least. In a London building, dampers are often spread across floors and risers, and testing is typically planned out of hours. London Fire Brigade covers Putney. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
If you manage offices, shops or flats near Putney station, the ductwork in them may pass through fire-resisting walls and floors, and any dampers need testing at least once a year. If you manage a school site such as Our Lady of Victories Catholic Primary School, any fire dampers can be tested in the holidays. Historic buildings that have had ventilation added later can hide dampers in awkward places; Fulham Palace, about 0.6 miles north-east, is one of the historic houses in the area around Putney.
Putney is about 1 mile south-west of Fulham, in Greater London. Across the SW15 area, we can carry out fire damper testing at your premises. 764 places in Greater London are on our list, from busy centres to quieter spots. London is in our area too, around 6 miles away.
Fire damper testing in SW15, SW19 and SW13 follows the same survey, fixed quote and written report as everywhere else we cover. Streets in the area include Putney High Street, Upper Richmond Road and Spencer Walk, all of which we cover for fire damper testing. Putney is on the A3 and B306, which makes it straightforward for our technicians to reach for out-of-hours visits. Other places close to Putney include Roehampton (1 mile south-west), Barnes (1 mile north-west), Fulham (1 mile north-east), Mortlake (2 miles west) and Wimbledon Park (2 miles south). Within a short drive, we also cover London (6 miles north-east), City of Westminster (5 miles north-east), Marylebone (5 miles north-east), Kensington (3 miles north), St Pancras (6 miles north-east) and Shoreditch (8 miles north-east).
What’s near Putney
Around Putney, our work takes us to kitchens and buildings near Putney School of Art and Design, Bishops Park and The Railway pub. There’s a railway station in Putney itself: Putney station. A little further out are Putney Exchange (within half a mile east) and Antique Breadboard Museum (within half a mile north-east). Green spaces nearby include Henman Hill and Battersea Park Lake.
Aftercare tips
Once we’ve finished, these simple steps help:
- Update the register when ductwork changes
- Never wedge or tie a damper open
- Act on failed dampers rather than leaving them on file
- Warn anyone working in ceiling voids about the dampers
Any damper that failed is listed with the reason, and we can quote for remedials. Once the work is done, the damper is tested again and the record updated.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
When it’s something else
Fire damper testing can’t fix everything, and we’d rather say so up front. It doesn’t solve:
- Holes around ductwork in fire-resisting walls
- Sign-off of the whole building’s fire safety
- Fire alarm or control system faults behind a smoke damper
If you’re not sure, just call us on 0345 646 2711 or send us an email and we’ll give you a straight answer.
What the work covers
- Hospitals and care homes
- Riser dampers
- Wall and floor dampers
- Fusible link fire dampers
- Motorised smoke dampers
- Offices and schools
Part by part
Smoke dampers
If a smoke damper will not operate when signalled, it goes on the report as a failure, along with what we saw.
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, when ceilings can be opened without disturbing lessons.
Why it’s worth doing now in Putney
When something goes wrong, people ask what checks were in place. A damper test log helps show the responsible person kept on top of things, and they only exist if the testing happened. For a site in Putney, fitting the work in overnight now is far easier than closing at short notice later.
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you’re unsure, call 0345 646 2711 or use the quote form and we will give you an honest view and a fixed quote.
Why choose Duct Doctor in Putney
- Survey first, then a fixed quote
- Evenings, overnight and weekends, plus 24/7 emergency callout
- In business since 2009
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at our cost guide and our accreditations and certificates.