Surrey · Fire damper testing
Fire and smoke damper testing in Pirbright
Fire damper testing across Pirbright and nearby, booked around your opening hours and finished with a written report and photos.
- Dampers that stick or won’t close fully
- Rusted damper blades and springs
- Dampers clogged with dust or grease
Fire damper testing for kitchens and businesses in Pirbright
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. Spring-operated dampers need testing every year as a minimum. Our job is to do the testing and hand you the paperwork that shows it. The work covers fusible link fire dampers, offices and schools and motorised smoke dampers, and common reasons people get in touch are corroded dampers in damp risers and plant rooms and smoke dampers with no recent test.
Testing in a small place like Pirbright is planned around the journey and access, and the test itself is the same as in any city building.
Nothing is signed off by word of mouth: a written report, dated and illustrated with photos, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Pirbright (GU24)
- Wider area
- Surrey
- Reporting
- Report and pictures after the visit
- Quotes
- Fixed quote, normally within a working day
- When we work
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Pirbright: your questions answered
Who enforces fire safety at workplaces in Pirbright?
That is Surrey Fire and Rescue Service. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Is Pirbright within the area you cover?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
What should I send you?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. Then ring 0345 646 2711 or email us.
How much does fire damper testing cost in Pirbright?
Every site is different, so each gets its own fixed quote. To get one, phone us on 0345 646 2711 or send us an email and tell us about the site and its opening hours.
Do you work with multi-site operators?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Every site has its own report.
Is TR19 cleaning required by law?
No, not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurers ask for proof of cleaning to it. The legal duty sits in the Regulatory Reform (Fire Safety) Order 2005 in England and Wales.
Can testing be done without disrupting the building?
Yes. We work evenings, overnight and weekends, so offices, shops and schools can carry on as normal. We plan the visit around when the building is quietest.
Do you look at the system first?
Yes. For many sites, pictures and a few details are enough, and larger or hidden systems get a visit.
For landlords and multi-site operators
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with photos.
We regularly work with managing agents. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
How the visit works
There are three stages on the day: getting the area ready, doing the work and signing it off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and photos. The middle part takes longest, which takes from an hour or two in a small building to several visits on a large estate. Somewhere like Pirbright, lanes, gates and parking are worth mentioning in advance.
- We start with whatever records exist: registers, drawings or old reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Dampers that close fully are reset and left open.
- The results go into a report, with failed dampers and remedials listed.
Getting ready for the visit
- Let us know when the site is closed or quiet
- Make sure someone can let us in and lock up afterwards
- Allow time for equipment near the work to be turned off and cool down
Getting a quote
If you need fire damper testing in Pirbright, ring 0345 646 2711 or email us. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. We usually send a fixed quote within one working day.
Advice
Nearby places to Pirbright
Also in Pirbright
What staff can safely do
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Why deal with it now?
Your fire risk assessor or insurer may want evidence that dampers have been tested. A current report on file means you can answer right away when someone asks. Out of sight is the usual reason a rural system goes too long without attention.
Working hours, access and the scale of the site all affect the cost. We take each of them into account, and the price is fixed before we start.
Why book with us
- Fully insured
- A single point of contact for sites across the South East and London
- CHAS and SafeContractor accredited, with ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
See how cleaning jobs are priced and our accreditations and certificates.
When to call us in Pirbright
Rust is a frequent reason a damper won’t close. Condensation, leaks and damp plant rooms corrode the parts that need to move, so a damper can seize without anyone noticing.
If you notice any of these, it’s worth a diagnosis:
- Fire dampers that haven’t been tested for over a year
- Rusted damper blades and springs
- Dampers hidden with no access panel or hatch
- Smoke dampers with no recent test
If you manage a school site such as Knowl Hill School, any fire dampers can be tested in the holidays.
Questions to ask before booking
- Exactly which parts of the system are covered
- Whether the work can be done while the site is closed
- How VAT is shown on the quote
- Whether the quote is based on a survey or photos
How the job changes from site to site
Ceiling voids and risers
Ceiling voids are where lots of dampers end up. We lift tiles where needed and put them back as we found them.
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We agree the arrangements with you in advance.
What fire damper testing cannot fix
It’s worth knowing the limits before booking:
- Missing dampers that a designer needs to specify
- Fire-stopping gaps around the duct where it passes through the wall
- Faults in the alarm or building controls that signal smoke dampers
If you’re not sure, just call 0345 646 2711 or send us an email and we will give you a straight answer.
What we work on in Pirbright
- Motorised smoke dampers
- Fusible link fire dampers
- Wall and floor dampers
- Riser dampers
- Offices and schools
- Hospitals and care homes
Pirbright buildings and fire safety
Going by the FSA’s register, there are about 3 hospitals, care homes and childcare premises serving food within about 1.5 miles of central Pirbright. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. Pirbright is covered by Surrey Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. For Pirbright, the closest hospital is Brookwood Hospital, roughly 1.9 miles north-east. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Wanborough Manor is about 4.4 miles south), finding every damper is the first job. If you look after a building near Brookwood station with a fire risk assessment due, a damper test with a full record is worth having first.
Pirbright is about 3 miles south-west of Woking, in Surrey. We provide fire damper testing for commercial premises of every kind in Pirbright and the rest of Surrey. Across Surrey, we cover 395 places, Pirbright among them.
We cover every part of the GU24 postcode area for fire damper testing and the roads nearby. If you need fire damper testing at premises on Cowbridge Meadow, Gibb's Acre and Church Lane or a nearby road, our technicians can take on the work. You will find Pirbright on the A324, which makes it straightforward for our technicians to reach for fire damper testing. Other places close to Pirbright include Stanford Common (1 mile south), Worplesdon (2 miles south-east), Willey Green (3 miles south), Fairlands (3 miles south-east) and Normandy (3 miles south). We also work in nearby towns such as Guildford (5 miles south-east), Woking (3 miles north-east), Camberley (5 miles north-west), Farnham (9 miles south-west), Egham (10 miles north-east) and Walton-on-Thames (12 miles north-east).
Local landmarks in Pirbright
Locally, jobs take us to businesses close to White Hart pub, Pirbright Village Primary School and The Winston Churchill School A Specialist Sports College. Pirbright’s nearest station is Brookwood station, about 0.8 miles north-east of the centre. Well-known places in the area include The Museum of The National Rifle Association (1.3 miles north) and Brookwood Hospital (1.9 miles north-east). For a walk, there’s Brookwood Lye.