Surrey · Fire damper testing
Fire damper testing in Peasmarsh, Surrey
Fire damper testing for Peasmarsh and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Rusted damper blades and springs
- Fire dampers nobody can get to
- Fire dampers with no recent test record
Fire damper testing in Peasmarsh
A drop test is simple in principle: the blade is released, checked for a full close and reset. We test dampers for sites in Peasmarsh and the rest of Surrey, logging each one so the record builds year on year. The work covers fusible link fire dampers, hospitals and care homes and wall and floor dampers, and common reasons people get in touch are dampers hidden with no access panel or hatch and blades that jam part-way when released.
Somewhere as small as Peasmarsh, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
The paperwork matters as much as the work. Each visit is written up with photos, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Place
- Peasmarsh (GU3)
- Region
- Surrey
- Reporting
- Report and pictures after the visit
- Price
- A fixed price before we start
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Fire dampers in Peasmarsh buildings
Food Standards Agency data includes about 7 schools, colleges and universities and about 9 care, childcare and hospital premises within roughly a mile and a half of the centre of Peasmarsh. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Peasmarsh’s nearest hospital, Farnham Road Hospital, is about 1.9 miles north. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Peasmarsh is covered by Surrey Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
If you manage a historic building in the area (Loseley Park is about 1.1 miles north-west), dampers fitted during conversions can be hard to reach and need recording. Farnham Road Hospital, about 1.9 miles north of Peasmarsh, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Peasmarsh is about 3 miles south of Guildford, in Surrey. Whatever kind of site you run in Peasmarsh, fire damper testing is something we can help with. We can work out of hours so the site keeps running. Peasmarsh is one of 395 places in Surrey where we work for commercial clients.
Here we cover the GU3 postcode area for fire damper testing. Whether your site is on James Road, Oakdene Road and Unstead Wood or anywhere close by, we can help. If your site is just outside Peasmarsh, we cover Broadford (1 mile north-east), Artington (1 mile north), Shalford (1 mile north-east), East Shalford (1 mile north-east) and Chilworth (2 miles east). Further out, we also cover Guildford (3 miles north), Woking (7 miles north), Camberley (11 miles north-west), Farnham (9 miles west), Egham (15 miles north) and Walton-on-Thames (14 miles north-east).
Landmarks near Peasmarsh
Locally, jobs take us to businesses close to The Queen Victoria pub, Shalford Mill and Shalford Infant School, among other places. Peasmarsh’s nearest station is Shalford station, about 0.8 miles north-east. Well-known places in the area include Surrey Police Museum (1 mile north) and Farnham Road Hospital (1.9 miles north). Open spaces near Peasmarsh include St Catherine's Hill and Farncombe Wood.
Multi-site and managed buildings
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Each site gets its own report and pictures, so records stay tidy.
Records are where multi-site compliance often slips. Each visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
Do you need fire damper testing in Peasmarsh?
Buildings in Peasmarsh change owners, tenants and maintenance contractors over the years, and damper records often get lost along the way. With no register, it’s hard to say how many dampers exist, let alone when they were tested.
Common reasons sites call us include:
- Dirty dampers that may not close
- Fire dampers that haven’t been tested for over a year
- Motorised smoke dampers due for testing
- Dampers affected by leaks or condensation
If you manage a school site such as Broadwater School, any fire dampers can be tested in the holidays.
Questions to ask before you book
- What happens if part of the system can’t be accessed
- If the quote is a fixed price or an estimate
- Exactly which parts of the system are covered
- Proof of insurance
Part by part
Offices and retail
Each new fit-out brings a risk of damaged or covered dampers. A test after the works shows the dampers still close.
Smoke dampers
A smoke damper is opened and closed by a motor, not a link. We test them through their controls and check each blade travels fully.
Aftercare tips
No system stays clean for ever, but care slows the build-up. A few tips:
- Act on failed dampers rather than leaving them on file
- Diary the annual test well ahead
- Report leaks or condensation near ductwork quickly
- Never wedge or tie a damper open
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. File it with your fire safety log so it’s to hand for assessors and insurers.
Deal with leaks and condensation near dampers quickly. Corrosion is a common reason blades stick.
What affects the quote in Peasmarsh
You’ll get a fixed price before we start. It takes into account:
- The scale of the work
- Where the site is and how we reach it
- Whether it’s a one-off visit or part of a schedule
- The number of sites or systems
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before any work starts.
Asking for a quote
Photos let us diagnose from a distance. The most useful are:
- Photos showing the whole system and its surroundings
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Your opening hours and when the area is out of use
- Any previous report or certificate
Every quote begins with a look at the system, either from photos and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.
What staff can safely do
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
What happens on the day
A visit follows the same order every time: sheeting and protection first, isolate whatever needs isolating, carry out the fire damper testing, tidy up and hand over the paperwork. On site, the work takes from an hour or two in a small building to several visits on a large estate. Seeing the system in pictures first means the trip to Peasmarsh can be planned properly.
- First we check the schedule and the last set of results.
- We locate every damper and note any we cannot reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Mention any parking or loading restrictions
- Dig out any earlier paperwork for the system
- Let us know when the site is closed or quiet
Ask for a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Advice
Your questions about fire damper testing in Peasmarsh
Do you test dampers in schools in Peasmarsh during the holidays?
Yes. The holidays are the usual time for school work. The FSA’s register shows about 7 schools and colleges with food registrations within roughly a mile and a half of Peasmarsh. Tell us your holiday dates and we will book the visit for when the site is empty.
Can you work in Peasmarsh outside opening hours?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Peasmarsh needn’t be disturbed. When you phone us on 0345 646 2711, or email photos, mention when the site is quiet.
Do we lose a day’s trading?
Not usually. Visits are timed for when the area is closed, such as overnight or at a weekend, so you keep your normal hours.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t legislation, but it’s the standard people check against.
How much notice do you need?
Book as early as you can for planned work, particularly if your next visit is nearly due. Emergencies are different, because our line is open 24/7.
What accreditations do you have?
We hold CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
What information do you need?
The site address, the type of premises and your opening hours, plus pictures of the system and your last certificate or report if you have one.
What if a fire damper will not close?
Failed dampers are reported and we can quote to repair or replace them. Once fixed, the damper is drop tested again and the record updated.