Surrey · Fire damper testing
Broadford fire damper testing
Fire damper testing in Broadford, surveyed first and signed off with a written report and pictures. Call for a fixed quote.
- Dust or grease build-up on damper blades
- Smoke dampers that need testing through their controls
- Dampers flagged on a fire risk assessment
How we handle fire damper testing in Broadford
Ductwork can carry fire and smoke between compartments, and the damper is what stops it. That depends entirely on the blade closing all the way. Regular drop testing is how that gets checked for the dampers in your building. If you’re dealing with dampers flagged on a fire risk assessment and missing or out-of-date damper records, we can help, from fusible link fire dampers, wall and floor dampers and motorised smoke dampers onwards.
Testing in a small place like Broadford is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Duct Doctor has been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
- Location
- Broadford (GU4)
- Region
- Surrey
- Reporting
- Photo report after every visit
- Price
- A fixed quote up front
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
What fire damper testing looks like in Broadford
The FSA’s food hygiene register lists about 16 schools, colleges and universities and about 8 care, childcare and hospital premises with registered kitchens or food service in and around Broadford, up to about a mile and a half out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Broadford sits within the area of Surrey Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. For Broadford, the closest hospital is Farnham Road Hospital, roughly 1.7 miles north. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
A school like Shalford Infant School can have any dampers tested over half-term without disturbing lessons. If you manage a care home or clinic near Broadford, the testing that a hospital like Farnham Road Hospital (about 1.7 miles north) relies on applies to your dampers too.
Broadford is about 2 miles south of Guildford, in Surrey. For fire damper testing in and around Broadford, please ring 0345 646 2711 or drop us a line for a fixed quote. Our area covers London and the South East, Broadford included. We cover 395 places across Surrey, from busy centres to quieter spots.
All of GU4 is covered for fire damper testing, from busy streets to back roads. We also cover Shalford (1 mile east), Peasmarsh (1 mile south-west), Artington (1 mile north-west), East Shalford (1 mile north-east) and Chilworth (2 miles east). We also work in nearby towns such as Woking (7 miles north), Camberley (11 miles north-west), Farnham (10 miles west), Egham (15 miles north), Walton-on-Thames (14 miles north-east) and Dorking (11 miles east).
Landmarks near Broadford
Typical jobs here are in premises near Shalford Mill, St Catherine's School and The Queen Victoria pub. There’s a railway station in Broadford itself: Shalford station. Well-known places in the area include Farnham Road Hospital (1.7 miles north) and Guildford Castle (1.5 miles north). Not far away are Pewley Down and Lower Lake.
Places near Broadford
More services for Broadford
How the visit works
Everything the job needs comes with us, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes a morning or an afternoon for a small number of dampers, longer where there are many. Rural roads and tight entrances are worth telling us about before a visit to Broadford.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Mention any parking or loading restrictions
- Allow time for equipment near the work to be turned off and cool down
- Let us know how we reach the system, including roofs, risers and plant rooms
How to get a quote
Want a quote for fire damper testing? Please call us on 0345 646 2711 or use the quote form with a few details about the site. We’ll talk you through the work and give you a fixed quote before anything is booked.
Advice
Questions from Broadford
Which fire authority looks after Broadford?
Surrey Fire and Rescue Service is the fire and rescue service for Broadford. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Do you work in villages like Broadford?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
How do you deal with dampers that cannot be reached?
We record it as not tested and explain why. We can fit an access panel so it’s tested on the next visit.
Who has the duty to keep fire dampers working?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005, such as the employer, owner, landlord or managing agent. They must keep fire safety measures, including dampers, in working order.
Who is the responsible person?
In the words of the Fire Safety Order 2005, it’s the responsible person. That is generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. If you’re not sure, check your lease and fire risk assessment.
What accreditations do you have?
We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
What if a fire damper will not close?
The failure goes on the report, along with what caused it, whether that is a stuck blade, rust or a damaged link. Remedials are offered, either a repair or a replacement damper, and test it again afterwards.
Do you survey before quoting?
Yes. Photos often do the job, and larger or hidden systems get a visit.
Part by part
Smoke dampers
A smoke damper that doesn’t respond to its controls is recorded as a fault, with a note of what we found.
Access panels
A damper can only be tested if it can be reached. That usually means an access panel in the duct, plus a way through the ceiling or wall.
How we price fire damper testing
The diagnosis comes before the price. We look at:
- The condition we find in the survey
- The number of sites or systems
- When the work can happen, such as evenings, overnight or weekends
- How big the system is
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
Helping us quote
A few details help us quote accurately. When you get in touch, it helps to send:
- The paperwork from the last visit, if you have it
- The times we could work without disrupting the site
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Where the site is and what kind of site it is
Some systems can be priced from photos; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
What staff can safely do
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, next to our reports.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Multi-site and managed buildings
For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
Keeping the system healthy
Simple habits between visits make a real difference. Our advice:
- File every damper report where your assessor can find it
- Report leaks or condensation near ductwork quickly
- Keep ceiling hatches and duct panels easy to open
- Brief other trades about dampers in ceilings and risers
If we couldn’t get to a damper, the report says so and why, such as no access panel or a blocked hatch. Access panels can be fitted so those dampers are tested on the next visit.
Keeping to at least annual testing stops small faults turning into failed dampers. A blade that’s just starting to stick is easier to deal with than a seized one.
What we are called out for in Broadford
Buildings in Broadford change owners, tenants and maintenance contractors over the years, and the damper records don’t always go with them. Without a register, nobody knows how many dampers there are or when they were last tested.
What we are most often called out for:
- Damper actions from a fire risk assessment
- Missing or out-of-date damper records
- Corroded dampers in damp risers and plant rooms
- Fire dampers with no recent test record
If you look after a building near Shalford station with a fire risk assessment due, a damper test with a full record is worth having first.
What your quote should include
- Proof of insurance
- Whether inaccessible sections are listed on the report
- What paperwork you get at the end
- Whether the quote is based on a survey or pictures