Kent · Fire damper testing
Fire damper testing in Marshborough, Kent
Looking for fire damper testing in Marshborough? We survey first, send you a fixed quote and work around your opening hours, then sign off with a report and pictures.
- Smoke dampers that need testing through their controls
- Fire dampers with no recent test record
- Dampers clogged with dust or grease
In-house cleaning or a specialist?
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. That’s our job.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Fire damper testing in Marshborough, done properly
Smoke dampers work differently from fire dampers. Smoke dampers are motorised and are opened and closed by a control system, so we test them by operating them through those controls and checking that each blade moves fully and returns. Common call-outs are for dust or grease build-up on damper blades and fire dampers with no recent test record, across wall and floor dampers, hospitals and care homes and riser dampers.
Testing in a small place like Marshborough is planned around the journey and access, and the test itself is the same as in any city building.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Marshborough (CT13)
- Wider area
- Kent
- Records
- Written report with photos
- Quotes
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Towns and villages near Marshborough
What else we do in Marshborough
What fire damper testing cannot fix
We’ll always give you a straight diagnosis, so here’s what fire damper testing will not do:
- Sign-off of the whole building’s fire safety
- Holes around ductwork in fire-resisting walls
- Designing the building’s fire compartments
If in doubt, ring 0345 646 2711 or use the quote form and we will say what we think.
What the work covers
- Motorised smoke dampers
- Fusible link fire dampers
- Riser dampers
- Wall and floor dampers
- Offices and schools
- Hospitals and care homes
How we price fire damper testing
The price is fixed before any work begins. It’s based on:
- The times the site is available
- Where the site is and how we reach it
- Site rules, permits and inductions
- The condition of the system
The price reflects the work, not guesswork. That is why every job is surveyed first, and the price is agreed before work begins.
What we need to know
Photos let us diagnose from a distance. The most useful are:
- The site address and the type of premises
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Your last certificate, test record or report
To help us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Once you have those, call 0345 646 2711, or email photos.
Fire dampers in Marshborough buildings
Food Standards Agency records list about 5 care, childcare and hospital premises registered as food businesses in and around Marshborough, up to about a mile and a half out. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Marshborough is covered by Kent Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage a historic building in the area (Goodnestone Park is about 3.7 miles south-west), dampers fitted during conversions can be hard to reach and need recording.
Marshborough is about 5 miles north-west of Deal, in Kent. Sites in Marshborough get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Across Kent, we cover 922 places, Marshborough among them. You can also see our page for Maidstone, roughly 34 miles from Marshborough.
Our technicians cover all of CT13 for fire damper testing and the streets around it. Neighbouring places we cover for fire damper testing include Woodnesborough (1 mile south-east), East Street (1 mile north), Statenborough (1 mile south-east), Felderland (2 miles south-east) and Sandwich (2 miles east). Further out, we also cover Canterbury (10 miles west), Margate (8 miles north-east), Dover (9 miles south), Folkestone (14 miles south-west), Ramsgate (7 miles north-east) and Broadstairs (8 miles north-east).
Near you in Marshborough
Typical jobs here are in premises near Ham Fen, among other places. Marshborough’s nearest station is Sandwich station, roughly 1.7 miles east of the centre. Other landmarks nearby include White Mill (1.3 miles north-east) and Sandown Castle (4.8 miles south-east). The countryside around Marshborough includes Monk's Wall nature reserve.
How the visit works
At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and it goes on the report too. All told, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. We agree a date with you, plan the drive to Marshborough and turn up when the site is quiet.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
How to prepare
- Mention any locked doors, roof access or ceiling voids
- Name a contact who can let us in at the agreed time
- Let us know when the site is closed or quiet
Ask for a quote
There’s no standard price list, because no two systems are the same. We look at your system first, from photos or on a visit, and then send you a fixed quote. To start, ring 0345 646 2711 or send us an email.
Advice
Looking after it afterwards
Think of this as the after-treatment advice, short and simple:
- Act on failed dampers rather than leaving them on file
- Tell contractors where dampers are before they start work
- Store test records alongside the fire risk assessment
- Keep the damper register up to date after any building work
After testing, you get a report listing each of the fire and smoke dampers we tested, with its location and its result. File it with your fire safety log so it’s to hand for assessors and insurers.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Corrosion is a common reason blades stick.
FAQs for Marshborough
Is Marshborough within the area you cover?
Yes, we work in villages as well as towns, and Marshborough is covered. A survey first, from pictures or a visit, means we arrive with the right kit.
Who enforces fire safety at workplaces in Marshborough?
It’s Kent Fire and Rescue Service, which covers Marshborough. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Can testing be done without disrupting the building?
Yes. We can test in the evening, overnight or at the weekend, which helps where ceilings cannot be opened during the day. In occupied care settings, we agree the order of work with staff.
Which accreditations do you hold?
We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
Do we lose a day’s trading?
Not typically. We need the work area to ourselves while we are on site, so we book a time when it would be closed anyway.
Can you come out in an emergency?
Yes, 24/7. Office hours are Monday to Friday, 8am to 6pm, with the emergency line covering every other hour.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Is TR19 cleaning required by law?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and many insurers can refuse or reduce a claim without proof of cleaning.
What we are called out for in Marshborough
Dust settles on damper blades, runners and springs over the years. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
It’s time to book a visit if you see:
- Missing or out-of-date damper records
- Fire dampers with no recent test record
- Fire dampers nobody can get to
- Dirty dampers that may not close
Site managers at schools such as Sandwich Technology School normally find the summer break the easiest time for ceiling work like damper testing.
Comparing quotes
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether the quote shows VAT
- Whether inaccessible sections are listed on the report
- What paperwork you get at the end
Part by part
Smoke dampers
Smoke dampers are motorised and run by a control system. Testing means operating them from the controls and check each blade travels fully.
Ceiling voids and risers
Damp plant areas are hard on dampers. We note any rust or water damage on the report so it can be dealt with.