Kent · Fire damper testing
Felderland fire damper testing
Specialist fire damper testing for Felderland: diagnosis first, then a fixed quote, the work and a report with photos. Ask us for a fixed quote.
- Motorised smoke dampers due for testing
- Corroded dampers in damp risers and plant rooms
- Buildings with no damper register
Fire damper testing in Felderland, done properly
Testing finds the dampers that will not close. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper rather than leaving you with a problem and no fix. Typical jobs include dampers affected by leaks or condensation and blades that jam part-way when released, on motorised smoke dampers, offices and schools and hospitals and care homes.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, and the dampers in them are easily forgotten. The first visit starts by locating each damper.
Think of the report as the system’s health record: a dated account with photos of everything we did. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Where
- Felderland (CT14)
- Wider area
- Kent
- Reporting
- Report and photos after the visit
- Quote
- A fixed price before any work starts
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Fire damper testing around Felderland
Felderland lies within about 3 miles of the sea. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. Food Standards Agency data includes about 8 hospitals, care homes and childcare premises within about 1.5 miles of central Felderland. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Felderland sits within the area of Kent Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage a historic building in the area (Goodnestone Park is about 4.7 miles west), dampers fitted during conversions can be hard to reach and need recording.
Felderland is about 4 miles north-west of Deal, in Kent. Wherever you are in the CT14 postcode area, we can take on fire damper testing. Felderland is one of 922 places in Kent we cover for commercial clients. Maidstone is in our area too, around 35 miles away.
Work in CT14 is surveyed, quoted and booked the same way as anywhere else. That includes premises on Felderland Lane, Felderland Close and Deal Road and the roads around them. Neighbouring places we cover for fire damper testing include Statenborough (1 mile west), Worth (1 mile east), Ham (1 mile south), Woodnesborough (1 mile north-west) and Sandwich (1 mile north). Within a short drive, we also cover Canterbury (11 miles west), Margate (9 miles north), Dover (8 miles south), Folkestone (14 miles south-west), Ramsgate (7 miles north-east) and Broadstairs (8 miles north-east).
What’s near Felderland
We work in commercial kitchens and buildings around The Blue Pigeons pub, Worth Primary School and Ham Fen. For rail, the closest station is Sandwich station, about 1 mile north-east of the centre. A little further out are Sandown Castle (3.3 miles south-east) and The Precinct Toy Collection (1.4 miles north). For a walk, there’s Monk's Wall nature reserve.
Places near Felderland
What else we do in Felderland
In-house cleaning or a specialist?
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
Felderland: your questions answered
Who enforces fire safety at workplaces in Felderland?
That’s Kent Fire and Rescue Service. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Can you get to a site in Felderland?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
What does fire damper testing cost?
Every site is different, so each gets its own fixed quote. For a quote, phone us on 0345 646 2711 or send us an email with the site type, opening hours and a few pictures.
Can you test motorised smoke dampers?
Yes. We test smoke dampers through their control system, as they’re motor driven. We check every blade moves fully and record the outcome.
Do you work with multi-site operators?
Yes. Send the list of sites and the work at each and you’ll get one fixed quote.
Can you quote from pictures?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, and the quote follows that.
What if a fire damper will not close?
We record the damper as failed, with the reason, whether that’s a stuck blade, rust or a damaged link. Remedials are offered, either a repair or a replacement damper, and test it again afterwards.
Who has the duty to keep fire dampers working?
It’s the responsible person, under the Fire Safety Order 2005. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.
Fixed quotes for fire damper testing in Felderland
Every site gets its own quote. These are the things that affect it:
- The size of the system
- How many systems or sites are involved
- The condition we find in the survey
- Where the site is and how we reach it
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we’ll explain each part.
What we need to know
You don’t need the technical terms. Just send:
- Problems your staff have spotted
- Where the site is and what kind of site it is
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The times we could work without disrupting the site
For a fixed quote, call 0345 646 2711 or email us and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
The process
The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes anything from a couple of hours for a handful of dampers to a full day for a large building, and the area is cleaned down before we leave. Visits to a village like Felderland are booked in advance, at a time that suits whoever runs the site.
- First we check the schedule and the last set of results.
- We locate every damper and note any we cannot reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Preparing for the visit
- Let us know when the site is closed or quiet
- Clear the space around the work
- Let us know how we reach the system, including roofs, risers and plant rooms
Ask for a quote
Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before any work starts.
Advice
Why deal with it now?
Leaving damper testing for another year does not make the dampers any more likely to work. The guidance from BESA is at least once a year, and a skipped year leaves a hole in your records as well. With notice, the visit to Felderland can be fitted around your bookings and events.
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered and we will price it together.
Why book with us
- Full insurance on every job
- Survey first, then a fixed quote
- Out-of-hours work and a 24/7 emergency line
- One number for every site across the South East and London
When to call us in Felderland
Other trades work around dampers all the time. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
Keep an eye out for these warning signs:
- Damper actions from a fire risk assessment
- Fire dampers that fail to drop shut
- Smoke dampers that need testing through their controls
- Fire dampers with no recent test record
A school like Sandwich Technology School can have any dampers tested over half-term without disturbing lessons.
Before booking anyone
- Which accreditations they hold, and whether you can check them
- What hours they’ll be on site
- What records you’ll receive afterwards
- Whether inaccessible sections are listed on the report
Different parts, different methods
Fusible link fire dampers
The link has to be in good order for the damper to work. We check its condition during the test and any problems go on the report.
Access panels
Over time, hatches and panels get covered up. Letting us know where they are speeds the visit up.
When something else is needed
We will not sell you work that does not address the problem, so these are the things it will not cover:
- Fire-stopping gaps around the duct where it passes through the wall
- Approving the building’s fire strategy
- Fire alarm or control system faults behind a smoke damper
If you are not sure, just call 0345 646 2711 or email us and we will give you a straight answer.
Where we work
- Offices and schools
- Motorised smoke dampers
- Fusible link fire dampers
- Riser dampers
- Wall and floor dampers
- Hospitals and care homes