Surrey · Fire damper testing
Fire Damper Testing in Margery
Fire damper testing across Margery and nearby, timed so the site keeps working and signed off in writing with pictures.
- Dampers that stick or won’t close fully
- Fire dampers nobody can get to
- Fire dampers that haven’t been tested for over a year
Fire damper testing in Margery
For every damper, we record where it is, whether it passed and the state it’s in. Passes are reset and left ready to work, and any that fail are listed with the reason. You end up with a clear record to keep with your fire safety documents. If you are dealing with fire dampers nobody can get to and rusted damper blades and springs, we can help, from fusible link fire dampers, wall and floor dampers and offices and schools onwards.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, and the dampers in them are easily forgotten. A first test typically starts with finding them all.
Nothing is signed off by word of mouth: a written report, dated and illustrated with photos, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Margery (KT20)
- Wider area
- Surrey
- Reporting
- Written report with photos
- Price
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
What your team can do, and what needs us
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Keeping the system healthy
Simple habits between visits make a real difference. We recommend:
- Close off damper faults promptly
- Never wedge or tie a damper open
- Tell contractors where dampers are before they start work
- Don’t let hatches get painted shut or boarded over
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s to hand for assessors and insurers.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
Margery questions
Do you work at weekends in Margery?
Yes, out-of-hours work is a big part of what we do. That way a site in Margery does not have to lose a day’s trading. Tell us your opening hours when you ask for a quote.
Who is the fire and rescue service for Margery?
Surrey Fire and Rescue Service is the fire and rescue service for Margery. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
How often do fire dampers need drop testing?
At least once a year, under BESA guidance, plus a test when the damper is first installed. Your fire risk assessment may call for some dampers to be tested more often.
Where does the waste go?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. None of it is left on site.
Do you certify fire dampers?
You get a test report recording every damper we tested, showing where it is, whether it passed and what we found. It belongs in your fire safety log.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Can you price the work without visiting?
In many cases, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Where we can’t see enough, we arrange a survey.
How much does fire damper testing cost in Margery?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before any work starts.
What a clean won’t put right
Some problems need a different service or another trade:
- Fire risk assessments, which need a fire risk assessor
- Ductwork crossing a fire wall with no damper fitted
- Gaps in the wall or floor around the damper
If in doubt, call 0345 646 2711 or drop us a line and we will say what we think before booking.
What the work covers
- Riser dampers
- Motorised smoke dampers
- Wall and floor dampers
- Fusible link fire dampers
- Offices and schools
- Hospitals and care homes
Fire damper testing around Margery
Going by the FSA’s register, there are about 5 schools, colleges and universities and about 4 hospitals, care homes and childcare premises serving food within about 1.5 miles of central Margery. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. About 3.4 miles south-east of Margery is East Surrey Hospital, the nearest hospital. Hospitals are a good example of a building with fire dampers across many floors and departments. Fire safety in Margery falls to Surrey Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Site managers at schools such as Kingswood Primary School usually find the summer break the easiest time for ceiling work like damper testing.
Margery is about 2 miles north of Reigate, in Surrey. Every kind of commercial site in Margery, we can take on fire damper testing. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. 395 places in Surrey are on our list, from busy centres to quieter spots. There’s also a page for Guildford, about 16 miles away.
Fire damper testing in KT20 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Manor Lane, Margery Lane and Mint Lane or anywhere close by, we can help. Other places close to Margery include Mogador (1 mile west), Lower Kingswood (1 mile north-west), Reigate (2 miles south), Kingswood (2 miles north) and Walton on the Hill (2 miles north-west). We also work in nearby towns such as Epsom (6 miles north-west), Horley (6 miles south), Ewell (7 miles north), Walton-on-Thames (12 miles north-west), Caterham (5 miles east) and Dorking (6 miles west).
Landmarks near Margery
We work in commercial kitchens and buildings around Reigate Manor Hotel, Reigate College and Castle Grounds and the streets around them. The nearest railway station is Reigate station, roughly 1.4 miles south of the centre. A little further out are East Surrey Hospital (3.4 miles south-east) and The Belfry (2.1 miles south-east). For a walk, there’s Colley Hill and Reigate Heath.
The process
Your staff do not need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Afterwards, the area is left tidy and the written report follows. A quick note on how to find the site and where to park makes a visit to Margery run smoothly.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
How to prepare
- Mention any locked doors, roof access or ceiling voids
- Let us know when the site is closed or quiet
- Tell us about site rules, permits or sign-in
Ask for a quote
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from photos or a survey, and then send you a fixed quote. To start, ring 0345 646 2711, or send details by email.
Related advice
For landlords and multi-site operators
We also work for facilities teams across offices, schools and healthcare across Surrey. Work can be phased by floor, building or site around the people who use them.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Signs you need fire damper testing in Margery
Links and springs age like any other part. Damaged or painted links and weak springs mean the blade may stop short, and that only becomes clear during a drop test.
Any of these means the system needs a check-up:
- Gaps in the fire damper test log
- Dirty dampers that may not close
- Dampers that cannot be reached without an access panel
- Fire dampers with no recent test record
Hospitals such as East Surrey Hospital, about 3.4 miles south-east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Margery, the same annual testing applies.
What to look for in a quote
- When the next visit should be, and why
- What’s included in the scope, part by part
- Whether inaccessible sections are listed on the report
- What paperwork you get at the end
What the work involves, part by part
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. Testing goes floor by floor so nothing is missed.
Access panels
If we cannot reach a damper, it goes on the report as inaccessible. We can fit access panels so it’s tested next time.