West Sussex · Fire damper testing
Fire damper inspection in Lyminster
Fire damper testing for Lyminster, with a survey first and a report with photos at the end. Call for a fixed quote.
- Dirty dampers that may not close
- Buildings with no damper register
- Dampers flagged on a fire risk assessment
Fire damper testing in Lyminster, done properly
We’re often asked to take on annual damper testing by the people who look after buildings in and around Lyminster. If there’s a damper register or a set of drawings, share it with us, and we will plan the visit around the building’s hours. If you have gaps in the fire damper test log and rusted damper blades and springs, we can put it right.
For a building in or near Lyminster, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
Insurers, fire officers and environmental health officers all look at records. That is why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Where
- Lyminster (BN17)
- Wider area
- West Sussex
- Reporting
- Photo report after each visit
- Price
- A fixed price before we start
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Keeping the system healthy
Here’s the after-treatment advice, short and simple:
- Keep cables and fixings away from damper blades
- File every damper report where your assessor can find it
- Add new dampers to the register as they’re fitted
- Get remedials done soon after a failed test
After testing, you get a report listing each of the fire and smoke dampers we tested, with its location and its result. Keep it with the building’s fire safety records so it’s ready when your assessor or insurer asks.
A simple register of every damper helps a great deal: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
Common questions in Lyminster
Do you test dampers in schools in Lyminster during the holidays?
Yes, and it’s the easiest time to do it. The FSA’s register shows about 10 schools and colleges with food registrations within roughly a mile and a half of Lyminster. Just call 0345 646 2711 or send us an email with your term dates and we’ll plan around them.
Can you work in Lyminster outside opening hours?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Let us know the hours you are closed and we will book within them.
How often should fire dampers be tested?
BESA guidance is that fire dampers are tested on completion of installation and at least annually after that. Spring-operated dampers need annual testing as a minimum.
Is Lyminster in your area?
Yes. Our area takes in London and the counties of South East England, Lyminster included.
Can you fix fire dampers that fail?
Failed dampers are reported and we can quote to repair or replace them. After the repair, we test it again so the record shows a pass.
What information do you need?
Only a few details: where it is, what kind of site, when it’s open and the access. Photos and any previous paperwork make it quicker. Then phone us on 0345 646 2711 or drop us a line.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
What about areas you cannot get to?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, and we can quote to improve the access.
Multi-site and managed buildings
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
What affects the quote in Lyminster
We quote each job individually. These are the things that affect it:
- The size of the system
- Site rules, permits and inductions
- The number of sites or systems
- The condition of the system
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re unsure, phone us on 0345 646 2711, or send details by email for straight advice and a fixed quote.
What to send for a quote
There’s no need for technical detail. It helps if you can send:
- Any previous report or certificate
- When the site is open and when it’s quiet
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Need a price for fire damper testing? Please call us on 0345 646 2711 or use the quote form with a few details about the site. We’ll talk you through the work and send you a fixed quote before you commit to anything.
Part by part
Access panels
Where there’s no access panel, we record the damper as not tested and say why. We can fit access panels so it’s tested next time.
Offices and retail
Fit-outs and tenant changes are hard on dampers. A test after the works shows the dampers still close.
What we do, step by step
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. On site, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Photos of the system and how to reach it help us plan a visit to Lyminster.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Dampers are located one by one and reached through their access panels.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Preparing for the visit
- Find the previous report, if there is one
- Tell us about site rules, permits or sign-in
- Let us know about parking and loading
How to get a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before any work starts.
Advice
Fire damper testing around Lyminster
Lyminster is within about 2 miles of the coast. Corrosion is a known cause of damper failure, and coastal air adds to the risk near intakes and louvres. The FSA’s food hygiene register lists about 10 schools, colleges and universities, about 21 caring premises (care homes, nurseries and hospitals) and about 12 hotels and guest houses with registered kitchens or food service in and around Lyminster, up to about a mile and a half out. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. Lyminster is covered by West Sussex Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage a school site such as Lyminster Primary School, any fire dampers can be tested in the holidays. If you manage a care home or clinic near Lyminster, the testing that a hospital like Arundel and District Hospital (about 1.9 miles north-west) relies on applies to your dampers too.
Lyminster is about 1 mile north-west of Littlehampton, in West Sussex. From the centre of Lyminster to the outskirts, we cover fire damper testing for every kind of premises, from a single unit to a large public building. Our West Sussex coverage runs to 371 places, Lyminster among them. Brighton is in our area too, around 18 miles away.
Every address in BN17 is within our area for fire damper testing, from busy streets to back roads. Streets in the area include Arundel Drive, Old Mead Road and Lyminster Road, and we cover them all for fire damper testing. Other places close to Lyminster include Wick (1 mile south), Toddington (1 mile south-east), Crossbush (1 mile north-east), Tortington (1 mile west) and Littlehampton (1 mile south-east). We also work in nearby towns such as Worthing (6 miles east), Bognor Regis (7 miles south-west), Chichester (10 miles west), Selsey (12 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (10 miles east).
Near you in Lyminster
Around Lyminster, our work takes us to kitchens and buildings near The 6 Bells Public House, The Littlehampton Academy and Littlehampton College and the streets around them. Lyminster’s nearest station is Arundel station, about 1.3 miles north. Nearby you’ll also find Arundel and District Hospital (1.9 miles north-west) and Rustington Museum (2.3 miles south-east). Not far away are Highdown Hill and WWT Arundel.
Why it’s worth doing now in Lyminster
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. In a place like Lyminster, ductwork and fans are easy to forget until something goes wrong.
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote, and the price is fixed before any work starts.
Why us?
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- One number for every site across the South East and London
- Photo reports with every job
- Accredited under CHAS and SafeContractor, with ISO 9001
See how cleaning jobs are priced and our accreditations and certificates.
Do you need fire damper testing in Lyminster?
Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
These are the problems we see most often:
- Fire dampers nobody can get to
- Rusted damper blades and springs
- Fire dampers that fail to drop shut
- Dirty dampers that may not close
If you manage a historic building in the area (Ecclesden Manor is about 3.3 miles east), dampers fitted during conversions can be hard to reach and need recording.
Comparing quotes
- Whether the price is fixed
- How they set the interval to the next visit
- What hours they’ll be on site
- How VAT is shown on the quote