West Sussex · Fire damper testing
Fire Damper Testing in Crossbush
Fire damper testing for Crossbush, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Dampers affected by leaks or condensation
- Missing or out-of-date damper records
- Motorised smoke dampers due for testing
Fire damper testing for kitchens and businesses in Crossbush
Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. Most are held open by a fusible link that melts at a set temperature, letting the blade drop and close the duct. Drop testing proves that this still happens, and we record the result for every damper we test. The work covers hospitals and care homes, riser dampers and motorised smoke dampers, and people most often call us about fire dampers that haven’t been tested for over a year and gaps in the fire damper test log.
For a building in or near Crossbush, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Crossbush (BN18)
- Region
- West Sussex
- Records
- Written report with pictures
- Quotes
- A fixed price before any work starts
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Multi-site and managed buildings
Whether it’s one building or many, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with pictures.
Records are where multi-site compliance often slips. Each visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
Fixed quotes for fire damper testing in Crossbush
A fixed price needs a few facts first. We check:
- What state the system is in
- Working hours and out-of-hours timing
- Any permits to work or inductions
- How easy every part is to reach
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we will explain each part.
Helping us quote
Photos let us diagnose from a distance. Try to include:
- When the site is open and when it’s quiet
- The roof, plant room or outside wall the system runs to
- Any previous report or certificate
- Any access panels or hatches you can see
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. Then we send a fixed price, before any work starts.
Also near Crossbush
More services for Crossbush
Different parts, different methods
Fusible link fire dampers
Spring-operated fire dampers need testing at least once a year. A weak spring or a sticking blade shows up when the damper is dropped.
Offices and retail
Offices and shops often have dampers above ceilings that are rarely opened. Testing can be done outside opening hours to keep disruption down.
In-house cleaning or a specialist?
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.
Keeping the system healthy
So the system stays in good health:
- Get remedials done soon after a failed test
- Report leaks or condensation near ductwork quickly
- Warn anyone working in ceiling voids about the dampers
- Keep the damper register up to date after any building work
After testing, you get a report listing each of the fire and smoke dampers we tested, with its location and its result. File it with your fire safety log so it’s to hand for assessors and insurers.
Keeping to at least annual testing stops small faults turning into failed dampers. A blade that is just starting to stick is easier to deal with than a seized one.
When something else is needed
Not every problem is solved by fire damper testing, and we’d rather say so up front. It does not solve:
- Fire risk assessments, which need a fire risk assessor
- Missing dampers that a designer needs to specify
- Approving the building’s fire strategy
Not sure which it is? You can ring 0345 646 2711 or drop us a line and we’ll tell you honestly.
Parts of the system we cover
- Wall and floor dampers
- Offices and schools
- Fusible link fire dampers
- Motorised smoke dampers
- Riser dampers
- Hospitals and care homes
Fire damper testing in Crossbush: local notes
At about 3 miles from the coast, Crossbush is close enough for sea air to matter. A damper that has corroded can stay open when it should close, which is why coastal sites are worth testing carefully. There are about 9 hotels, B&Bs and guest houses on the FSA’s food hygiene register in and around Crossbush, up to about a mile and a half out. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Arundel and District Hospital is the nearest hospital, about 1.5 miles north-west of Crossbush. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.
A school like The Littlehampton Academy can have any dampers tested over half-term without disturbing lessons. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Ecclesden Manor is about 3 miles east), finding every damper is the first job. For buildings around Arundel station with ducted ventilation, any fire dampers need an annual test at least.
Crossbush is about 2 miles north of Littlehampton, in West Sussex. Whatever kind of site you run in Crossbush, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. 371 places in West Sussex are on our list, large and small. Our Brighton page covers sites nearby (18 miles or so).
Work in BN18 follows the same survey, fixed quote and written report as everywhere else we cover. Close by, we work in Warningcamp (1 mile north-east), Poling (1 mile south-east), Lyminster (1 mile south-west), Arundel (1 mile north-west) and Toddington (1 mile south). Within a short drive, we also cover Worthing (6 miles east), Bognor Regis (8 miles south-west), Chichester (11 miles west), Selsey (13 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (9 miles east).
What’s near Crossbush
Crossbush’s nearest station is Arundel station, roughly 0.5 miles north-west of the centre. Nearby you’ll also find Lyminster Siege Castle (0.5 miles north) and Rustington Museum (2.8 miles south-east). Not far away are WWT Arundel and Highdown Hill.
What we do, step by step
At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and the same goes into the written report. The visit takes a few hours for a single floor, with bigger buildings phased over more than one visit. Photos of the system and how to reach it help us plan a visit to Crossbush.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Each damper is located and reached through its access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
How to prepare
- Plan for cooking equipment or plant to be off before we arrive
- Move anything stored near the system
- Have your last certificate or report to hand
How to get a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
Read more
FAQs for Crossbush
Can you get to a site in Crossbush?
Yes. Villages and rural sites across the South East are part of our work, Crossbush included. Let us know about access, parking and anything unusual about getting there when you book.
Does the sea air around Crossbush make a difference to fire damper testing?
It can. Being within about 3 miles of the sea means more corrosion on metalwork in Crossbush than inland. We pay particular attention to dampers near louvres and intakes, where salt air reaches.
What accreditations do you have?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
How often does BESA say fire dampers should be tested?
At least once a year, under BESA guidance, plus a test when the damper is first installed. Your fire risk assessment may call for some dampers to be tested more often.
What happens if you can’t reach some of it?
Anything we can’t reach goes on the report, with a note of where it is, and we tell you what would make it reachable, for example new access panels.
Do you have a 24/7 line?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
Is TR19 cleaning required by law?
No. TR19® itself is not law; it’s a BESA specification. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
What does TR19 mean?
BESA’s ventilation hygiene specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.