West Sussex · Fire damper testing
Fire damper inspection in Lickfold
Our technicians work in Lickfold on fire damper testing. Fixed quotes, work around your opening hours and photo reports as standard.
- Fire dampers that fail to drop shut
- Dampers affected by leaks or condensation
- Damper actions from a fire risk assessment
Between visits
So the system stays in good health:
- Update the register when ductwork changes
- Keep to at least yearly testing
- Act on failed dampers rather than leaving them on file
- Keep ceiling hatches and duct panels easy to open
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s to hand for assessors and insurers.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.
Fire damper testing in Lickfold
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We locate and test the dampers we can reach and record the ones we can’t, so you can see exactly what still needs access. The work covers offices and schools, riser dampers and fusible link fire dampers, and people most often call us about rusted damper blades and springs and damper actions from a fire risk assessment.
Testing in a small place like Lickfold is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Where
- Lickfold (GU28)
- Region
- West Sussex
- Paperwork
- Written report with pictures
- Quote
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Lickfold buildings and fire safety
For Lickfold, the closest hospital is Midhurst Community Hospital, roughly 3.2 miles south-west. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Lickfold, about 41 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you.
Historic buildings that have had ventilation added later can hide dampers in awkward places; Cowdray House, about 3.4 miles south-west, is one of the historic houses in the area around Lickfold. Hospitals such as Midhurst Community Hospital, about 3.2 miles south-west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Lickfold, the same annual testing applies.
Lickfold is about 11 miles east of Petersfield, in West Sussex. Lickfold gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Our area takes in 371 places across West Sussex, large and small. You can also see our page for Guildford, about 16 miles away.
Fire damper testing in GU28 follows the same survey, fixed quote and written report as everywhere else we cover. Close by, we work in Lurgashall (1 mile north-east), Lodsworth (2 miles south), Northchapel (3 miles north-east), Ebernoe (3 miles east) and Ansteadbrook (4 miles north). Larger places within reach include Chichester (13 miles south), Storrington (12 miles south-east), Billingshurst (10 miles east), Portfield (13 miles south), Yapton (15 miles south) and Southwater (15 miles east).
Landmarks near Lickfold
The closest station to Lickfold is Haslemere station, roughly 4.7 miles north. Nearby you’ll also find Lodsworth Castle (3.1 miles south) and Midhurst Museum (3.6 miles south-west). The countryside around Lickfold includes Cooksbridge Meadow and Blackdown.
Nearby places to Lickfold
Also in Lickfold
In-house cleaning or a specialist?
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
When it’s something else
In fairness, there are a few things this work won’t fix:
- Designing the building’s fire compartments
- Gaps in the wall or floor around the damper
- Approving the building’s fire strategy
Not sure which it is? You can call 0345 646 2711 or drop us a line and we’ll tell you honestly.
What the work covers
- Hospitals and care homes
- Riser dampers
- Wall and floor dampers
- Motorised smoke dampers
- Offices and schools
- Fusible link fire dampers
Part by part
Access panels
Testing depends on getting to the damper. Most need an access panel in the duct and a hatch in the ceiling or wall.
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Regular damper testing supports that.
Common questions in Lickfold
Which fire and rescue service is responsible for Lickfold?
That is West Sussex Fire and Rescue Service. If a fire safety officer audits the building, they may ask for the latest damper test records.
Can the work in Lickfold be done at night or at weekends?
Yes, nights and weekends are routine for us. The work in Lickfold can fit around your hours. Tell us your opening hours when you ask for a quote.
Are you accredited?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We’re fully insured and have been trading since 2009.
Is TR19 cleaning required by law?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and many insurers can refuse or reduce a claim without proof of cleaning.
How do you deal with dampers that can’t be reached?
It goes on the report as inaccessible, with the reason. Access panels can be installed so the damper can be tested next time.
How often do fire dampers need drop testing?
BESA’s guidance is a test on installation and at least once a year after that. Some sites choose to test more often where the risk is higher.
What happens if a damper fails its test?
The failure goes on the report, along with what caused it, whether that is a stuck blade, rust or a damaged link. Remedials are offered, either a repair or a replacement damper, and test it again afterwards.
Which sectors do you work in?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
What happens if it’s left?
After any fire, one of the first questions is what maintenance had been done. Damper test records are part of that answer, and you can only produce records for tests that took place. Out of sight is the usual reason a rural system goes too long without attention.
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll go through it with you.
What you get with us
- Work around your opening hours, with 24/7 emergency cover
- Fixed quotes from a survey or pictures
- A single point of contact for sites across the South East and London
- We are fully insured
Take a look at what affects the cost and our accreditations and certificates.
What happens on the day
A visit follows the same order every time: sheeting and protection first, isolate whatever needs isolating, do the work, clear away and leave you the report. On site, the work takes a couple of hours for a few dampers, and a day or more across a big site. In a small place like Lickfold, the journey is planned ahead and the visit arranged around the site’s hours.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Preparing for the visit
- Arrange a key holder or contact on site
- Mention any locked doors, roof access or ceiling voids
- Mention any parking or loading restrictions
Get a fixed quote
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Advice
Fixed quotes for fire damper testing in Lickfold
The quote reflects the site in front of us. We consider:
- Site rules, permits and inductions
- The condition we find in the survey
- A single visit or a regular plan
- When the work can happen, such as evenings, overnight or weekends
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before we start.
What we need to know
Photos let us diagnose from a distance. The most useful are:
- Any access panels or hatches you can see
- The roof, plant room or outside wall the system runs to
- The site address and the type of premises
- Your opening hours and when the area is out of use
Getting a quote doesn’t take long. Send a few details and pictures, and we normally reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.