West Sussex · Fire damper testing
Fire damper testing in Kent Street, West Sussex
Fire damper testing for Kent Street, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Buildings with no damper register
- Fire damper items raised by an assessor
- Smoke dampers that need testing through their controls
Fire damper testing in Kent Street
Ductwork can carry fire and smoke between compartments, and the damper is what stops it. A damper only does its job if the blade can drop fully. Annual drop testing is how you know in each part of the building. We are often asked to deal with dampers flagged on a fire risk assessment and corroded dampers in damp risers and plant rooms, on offices and schools, wall and floor dampers and hospitals and care homes.
Somewhere as small as Kent Street, fire dampers are usually found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
The paperwork matters as much as the work. Each visit is written up with pictures, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Location
- Kent Street (RH13)
- Region
- West Sussex
- Paperwork
- Report and photos after the visit
- Quote
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Between visits
How long the results last depends on use and care. We suggest:
- Close off damper faults promptly
- Store test records alongside the fire risk assessment
- Add new dampers to the register as they’re fitted
- Keep an eye out for damp around dampers
Share the results with your fire risk assessor so their assessment matches what was found. Faults on the report are worth closing off quickly.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
Multi-site and managed buildings
We also work for facilities teams across offices, schools and healthcare across West Sussex. Larger estates can be phased building by building around the people who use them.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
What we’re called out for in Kent Street
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either can stop the blade dropping fully.
What we’re most often called out for:
- Damper actions from a fire risk assessment
- Gaps in the fire damper test log
- Dampers overdue for their annual drop test
- Smoke dampers with no recent test
The Dene Hospital, about 3.8 miles east of Kent Street, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
What your quote should include
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Exactly which parts of the system are covered
- What hours they’ll be on site
- Whether the quote shows VAT
When something else is needed
We’ll always give you a straight diagnosis, so here’s what fire damper testing won’t do:
- Fire alarm or control system faults behind a smoke damper
- Fire-stopping gaps around the duct where it passes through the wall
- Signing off a building’s overall fire safety
Not sure which it is? You can phone us on 0345 646 2711, or send details by email and we’ll tell you honestly before booking.
What the work covers
- Hospitals and care homes
- Offices and schools
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
Towns and villages near Kent Street
Other services in Kent Street
Fixed quotes for fire damper testing in Kent Street
The diagnosis comes before the price. The main factors are:
- The number of sites or systems
- Where the site is and how we reach it
- Site requirements such as sign-in and permits
- One-off work versus a regular cycle
When the work has to happen, how we reach it and how big the site is all affect the cost. We take each of them into account, and the price is fixed before work begins.
Asking for a quote
What to send for a quote:
- The site address and the type of premises
- Photos showing the whole system and its surroundings
- Detail shots of panels, filters and grilles
- Your last certificate, test record or report
Need a price for fire damper testing? Please ring 0345 646 2711 or send us an email with a few details about the site. We’ll talk you through the work and give you a fixed quote before anything is booked.
What happens on the day
Protection comes first: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes from an hour or two in a small building to several visits on a large estate, and the area is cleaned down before we leave. Somewhere as small as Kent Street, the date and timings are agreed with you well before the day.
- First we check the schedule and the last set of results.
- We locate every damper and note any we cannot reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
How to prepare
- Plan for cooking equipment or plant to be off before we arrive
- Dig out any earlier paperwork for the system
- Clear loose items from the work area
Get a fixed quote
To get a fixed quote, call us on 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will typically have a quote within one working day.
Advice
FAQs for Kent Street
Can you work in Kent Street outside opening hours?
Yes, we can come after you close and finish before you open. It means the site in Kent Street keeps running as normal. When you give us a ring on 0345 646 2711 or use the quote form, mention when the site is quiet.
Who is the fire and rescue service for Kent Street?
It’s West Sussex Fire and Rescue Service, which covers Kent Street. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Do you cover Kent Street?
Yes. We cover Kent Street and across West Sussex, as part of our work across South East England and London. To book, call us on 0345 646 2711, or email photos.
How much does fire damper testing cost in Kent Street?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before we start.
What do you do with what you remove?
We take it away when we go. During the work, it’s contained so the area stays clean.
Do you have insurance?
Yes. We are fully insured, and the details are available on request.
How long will damper testing take?
Testing takes a couple of hours for a few dampers, and a day or more across a big site. Bigger sites can be phased, so phone us on 0345 646 2711, or send details by email for a quote.
Is a quote from photos possible?
Typically, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we usually come back within one working day. If pictures aren’t enough, we will survey first.
What fire damper testing looks like in Kent Street
Kent Street is covered by West Sussex Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty. About 37 miles out from central London, Kent Street is part of the South East area we work across. The visit is fixed around your opening hours, not ours.
For buildings in and around Kent Street, every damper is drop tested, reset and recorded.
Kent Street is about 5 miles west of Burgess Hill, in West Sussex. Every kind of commercial site in Kent Street, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. Our area takes in 371 places across West Sussex, large and small. There’s also a page for Brighton, roughly 11 miles from Kent Street.
Our technicians cover all of the RH13 postcode area for fire damper testing and the streets around it. We also cover Wineham (1 mile south-east), Cowfold (1 mile north-west), Twineham Green (2 miles east), Shermanbury (2 miles south-west) and Twineham (2 miles south-east). Larger places within reach include Crawley (10 miles north), Horsham (7 miles north-west), Worthing (12 miles south-west), Haywards Heath (7 miles east), Burgess Hill (5 miles east) and East Grinstead (15 miles north-east).
Local landmarks in Kent Street
Nearby you will also find The Dene Hospital (3.8 miles east). Not far away are Knepp Wildland.
How the job changes from site to site
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. Signs of corrosion or water are recorded so the cause can be tackled.
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Annual damper testing is part of keeping that in place.