East Sussex · Fire damper testing
Jarvis Brook fire damper testing
Fire damper testing for Jarvis Brook, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- Dust or grease build-up on damper blades
- Fire dampers that fail to drop shut
- Fire damper items raised by an assessor
Fire damper testing in Jarvis Brook, done properly
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Jarvis Brook. If there’s a damper register or a set of drawings, share it with us, and we will plan the visit around the building’s hours. If you are dealing with blades that jam part-way when released and dust or grease build-up on damper blades, we can put it right.
Somewhere as small as Jarvis Brook, fire dampers are normally found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
Good records are part of the job. You get a written report with photos after each visit, covering the work done, any areas we couldn’t access and a recommended next date. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Location
- Jarvis Brook (TN6)
- Wider area
- East Sussex
- Paperwork
- Photo report after every visit
- Price
- A fixed price before any work starts
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
How the visit works
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Before we leave, the area is tidied and the paperwork follows. Somewhere like Jarvis Brook, lanes, gates and parking are worth mentioning in advance.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
How to prepare
- Mention any sign-in, permit or induction we need
- Tell us the best time to work, such as after service or at a weekend
- Plan for cooking equipment or plant to be off before we arrive
Get a fixed quote
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Advice
Places near Jarvis Brook
Other services in Jarvis Brook
Jarvis Brook buildings and fire safety
There are about 8 care, childcare and hospital premises on the FSA’s food hygiene register within about 1.5 miles of central Jarvis Brook. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Jarvis Brook sits within the area of East Sussex Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. About 1.3 miles west of Jarvis Brook is Crowborough War Memorial Hospital, the nearest hospital. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.
School buildings such as Jarvis Brook Primary School are typically tested in the holidays, wherever they have dampers. If you manage a care home or clinic near Jarvis Brook, the testing that a hospital like Crowborough War Memorial Hospital (about 1.3 miles west) relies on applies to your dampers too.
Jarvis Brook is about 1 mile east of Crowborough, in East Sussex. We provide fire damper testing for businesses, landlords and public buildings in Jarvis Brook and the rest of East Sussex. Our area takes in 289 places across East Sussex, large and small. There’s also a page for Brighton, about 20 miles away.
Our technicians cover all of TN6 for fire damper testing and the streets around it. Whether your site is on Western Road, Tubwell Lane and Osborne Road or anywhere close by, our technicians can take on the work. Neighbouring places we cover for fire damper testing include Crowborough (1 mile west), Steel Cross (1 mile north), Boarshead (1 mile north), Sweethaws (2 miles south-west) and Marden's Hill (3 miles north-west). Within a short drive, we also cover Lewes (14 miles south-west), Hailsham (13 miles south), Uckfield (7 miles south-west), South Malling (14 miles south-west), Heathfield (6 miles south-east) and Southover (15 miles south-west).
Landmarks near Jarvis Brook
Around Jarvis Brook, our work takes us to kitchens and buildings near Beacon Academy. There’s a railway station in Jarvis Brook itself: Crowborough station. Other landmarks nearby include Crowborough War Memorial Hospital (1.3 miles west). Open spaces near Jarvis Brook include Crowborough Country Park.
Leave it or put it right?
A damper that is stuck open gives fire and smoke a route straight through a fire-resisting wall. The rest of the compartment can be built perfectly and still be bypassed by the duct. Testing now is how you find out before it matters. Systems in rural buildings are often out of sight and out of mind.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
What you get with us
- We are fully insured
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- A single point of contact for sites across the South East and London
- CHAS, SafeContractor and ISO 9001
See what affects the cost and our accreditations.
Looking after it afterwards
Results last longer with the right care. Here’s what we suggest:
- File every damper report where your assessor can find it
- Keep cables and fixings away from damper blades
- Keep to at least yearly testing
- Get remedials done soon after a failed test
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s ready when your assessor or insurer asks.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
Common problems we fix in Jarvis Brook
Links and springs age like any other part. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, which only shows up when the damper is dropped.
Any of these means the system needs a check-up:
- Damper actions from a fire risk assessment
- Fire dampers that haven’t been tested for over a year
- Dust or grease build-up on damper blades
- Dampers affected by leaks or condensation
For managed buildings around Crowborough station, damper testing can be booked out of hours so tenants aren’t disturbed.
What to look for in a quote
- Whether the quote is based on a survey or photos
- Whether the quote shows VAT
- Whether the whole system is included, or only the parts that are easy to reach
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
Common questions in Jarvis Brook
Which fire and rescue service is responsible for Jarvis Brook?
Fire safety enforcement in Jarvis Brook is handled by East Sussex Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Will you come out to Jarvis Brook?
Yes, we work in villages as well as towns, and Jarvis Brook is covered. Let us know about access, parking and anything unusual about getting there when you book.
Do you work with multi-site operators?
Yes. Send the list of sites and the work at each and we will quote them together.
Does the law say we must follow TR19?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and without records, many insurers may refuse or reduce a claim.
Do you survey before quoting?
Yes. We always survey first, either from pictures and details you send or on a site visit. Then you get a fixed quote.
How often does BESA say fire dampers should be tested?
The guidance from BESA is at least annually, by a competent person. Dampers should also be tested when they’re first installed.
Can you quote from photos?
In many cases, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Where we can’t see enough, we arrange a survey.
Do you have a 24/7 line?
Yes, day and night, every day of the year. Office hours are Monday to Friday, 8am to 6pm, with the emergency line covering every other hour.
Managing agents and facilities teams in Jarvis Brook
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
How we price fire damper testing
Sites vary more than people expect. The main factors:
- Site requirements such as sign-in and permits
- The size of the system
- Whether it’s a one-off visit or part of a schedule
- Whether we need access equipment or extra panels
The price reflects the work, not guesswork. That is why every job is surveyed first, and why the quote is fixed before we start.
What to send for a quote
A few details help us quote accurately. When you get in touch, it helps to send:
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- The times we could work without disrupting the site
- The roof, plant room or outside wall the system runs to
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.