Surrey · Fire damper testing
Fire and smoke damper testing in Horne
Fire damper drop testing and smoke damper testing, with a record for each damper for commercial sites in Horne and across Surrey. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- Fire dampers with no recent test record
- Damper actions from a fire risk assessment
- Dirty dampers that may not close
Fire damper testing for kitchens and businesses in Horne
Wherever a duct crosses a fire-resisting wall or floor, there should be a fire damper inside it. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. A drop test shows that the damper still does that when it matters, and every result is written down, damper by damper. Common call-outs are for smoke dampers that need testing through their controls and dampers clogged with dust or grease, on fusible link fire dampers, hospitals and care homes and offices and schools.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
The paperwork matters as much as the work. Each visit is written up with pictures, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Location
- Horne (RH6)
- Region
- Surrey
- Reporting
- Report and photos after the visit
- Price
- A fixed price before work begins
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Fire dampers in Horne buildings
Horne is about 22 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible. Horne sits within the area of Surrey Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage a care home or clinic near Horne, the testing that a hospital like East Surrey Hospital (about 4.2 miles north-west) relies on applies to your dampers too.
Horne is about 4 miles east of Horley, in Surrey. If you need fire damper testing in Horne, it’s easy to get a fixed quote: please call us on 0345 646 2711, or send details by email. Our area covers London and the South East, including Horne. 395 places in Surrey are on our list, from busy centres to quieter spots. London is in our area too, around 22 miles away.
Here we cover the RH6 postcode area for fire damper testing. If you need fire damper testing at premises on Church Road and Whitewood Lane or anywhere close by, our technicians can take on the work. If your site is just outside Horne, we cover Whitewood (1 mile north-east), Blindley Heath (1 mile north-east), Newchapel (2 miles south-east), Lingfield Common (3 miles east) and Domewood (3 miles south). Within a short drive, we also cover Epsom (13 miles north-west), Horley (4 miles west), Redhill (5 miles north-west), Ewell (14 miles north-west), Reigate (6 miles north-west) and Caterham (7 miles north).
Near you in Horne
Locally, jobs take us to businesses close to The Jolly Farmer pub, among other places. The closest station to Horne is Godstone station, roughly 2.6 miles north-east of the centre. Well-known places in the area include East Surrey Hospital (4.2 miles north-west) and Bletchingley Castle (3.8 miles north). Not far away are Bay Pond and Hedgecourt Lake.
Signs you need fire damper testing in Horne
Buildings in Horne change owners, tenants and maintenance contractors over the years, and damper records often get lost along the way. With no register, it’s hard to say how many dampers exist, let alone when they were tested.
Any of these means the system needs a check-up:
- Fire damper items raised by an assessor
- Fire dampers that haven’t been tested for over a year
- Corroded dampers in damp risers and plant rooms
- Missing or out-of-date damper records
Every damper we test around Horne gets its own entry in the report, with photos.
What your quote should include
- Whether the figure could change on the day
- What paperwork you get at the end
- Whether a survey comes first
- How VAT is shown on the quote
Also in Horne
Fixed quotes for fire damper testing in Horne
Your quote is based on your site. We consider:
- The condition of the system
- The scale of the work
- The times the site is available
- Any permits to work or inductions
We do not list prices on the website, because the cost depends on the site in front of us. For a fixed quote, call us on 0345 646 2711, or send details by email, and we will talk you through it.
What we need to know
To speed up the quote, send us:
- Photos showing the whole system and its surroundings
- Detail shots of panels, filters and grilles
- The site address and the type of premises
- Any previous report or certificate
Every quote begins with a look at the system, from your photos and details or, where that isn’t enough, a survey on site. Then we send a fixed price so you know the cost before work begins.
What we do, step by step
Everything the job needs comes with us, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. The visit takes a morning or an afternoon for a small number of dampers, longer where there are many. Somewhere as small as Horne, the date and timings are agreed with you well before the day.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we cannot reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Before we arrive
- Tell us the best time to work, such as after service or at a weekend
- Allow time for equipment near the work to be turned off and cool down
- Make sure someone can let us in and lock up afterwards
Get a fixed quote
If you need fire damper testing in Horne, give us a ring on 0345 646 2711 or email us. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. We normally send a fixed quote within one working day.
Read more
What fire damper testing cannot fix
An honest diagnosis matters more to us than a booking, so here’s what fire damper testing will not do:
- Sign-off of the whole building’s fire safety
- Fire-stopping gaps around the duct where it passes through the wall
- Deciding where dampers should be fitted
If you are not sure, just phone us on 0345 646 2711 or email us and we will give you a straight answer.
Parts of the system we cover
- Fusible link fire dampers
- Offices and schools
- Riser dampers
- Hospitals and care homes
- Motorised smoke dampers
- Wall and floor dampers
What happens if it’s left?
When something goes wrong, people ask what checks were in place. Damper test records are part of that answer, and they only exist if the testing happened. Planning a trip to Horne ahead is easier for everyone than a rushed one.
One small site or a whole estate, we price it on the same basis: the work involved, the access and the timing. You’ll have a fixed price before any work starts.
Why book with us
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Trading since 2009
- Work around your opening hours, with 24/7 emergency cover
- CHAS and SafeContractor accredited, with ISO 9001
How the job changes from site to site
Offices and retail
In shared buildings, some dampers sit inside tenants’ space. Access to each area is planned with whoever manages the building.
Smoke dampers
Smoke dampers are motorised and run by a control system. We test them through their controls and check each blade travels fully.
In-house cleaning or a specialist?
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
Your questions about fire damper testing in Horne
Can you get to a site in Horne?
Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.
Who enforces fire safety at workplaces in Horne?
That’s Surrey Fire and Rescue Service. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
What is TR19?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t law, but it’s the benchmark.
Can you price the work without visiting?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Where we cannot see enough, we arrange a survey.
What does fire damper testing cost?
It depends on the site, so we quote each one individually. For a quote, give us a ring on 0345 646 2711, or send details by email with the site type, opening hours and a few photos.
Who is the responsible person?
The law calls them the responsible person. It’s normally the employer, or whoever controls the building, and where several people have control, each can have duties. Your lease and fire risk assessment should make it clear.
Can we book visits on a schedule?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.
What accreditations do you have?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.