Kent · Fire damper testing
Fire Damper Testing in Hollingbourne
Our technicians work in Hollingbourne on fire damper testing. Fixed quotes, work around your opening hours and photo reports on every job.
- Dampers affected by leaks or condensation
- Gaps in the fire damper test log
- Fire dampers that haven’t been tested for over a year
How we handle fire damper testing in Hollingbourne
In a fire, ductwork can act as a shortcut for flame and smoke from one part of a building to the next. That depends entirely on the blade closing all the way. Annual drop testing is how you know for the dampers in your building. If you are dealing with dampers overdue for their annual drop test and dirty dampers that may not close, we can help, from hospitals and care homes, fusible link fire dampers and wall and floor dampers onwards.
For a building in or near Hollingbourne, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
The sign-off is always in writing: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Hollingbourne (ME17)
- Region
- Kent
- Records
- Written report with photos
- Quote
- A fixed price before work begins
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Different parts, different methods
Schools, hospitals and care homes
In schools and colleges, testing fits well into holidays and weekends, with no classes to work around.
Ceiling voids and risers
Damp plant areas are hard on dampers. Signs of corrosion or water are recorded so it can be dealt with.
Multi-site and managed buildings
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.
Looking after it afterwards
Simple habits between visits make a real difference. Our advice:
- Tell contractors where dampers are before they start work
- Keep the damper register up to date after any building work
- Do not let anything obstruct a damper’s blade
- Book the next test before the year runs out
Put the next test in the diary within twelve months. The guidance is at least once a year, and booking the same month each year keeps it simple.
Clean ductwork means less dust and grease reaching the dampers. Duct cleaning and damper testing can be planned side by side.
What affects the cost of fire damper testing
You’ll get a fixed price before work begins. It’s based on:
- How many systems or sites are involved
- Working hours and out-of-hours timing
- One-off work versus a regular cycle
- The size of the system
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll explain each part.
What we need to know
What to send for a quote:
- The paperwork from the last visit, if you have it
- The postcode and the type of business
- Any symptoms, from odd noises to smells or leaks
- The roof, plant room or outside wall the system runs to
Need a price for fire damper testing? Please call 0345 646 2711 or drop us a line and tell us about the site. We’ll explain what we’d do and send a fixed quote before anything is booked.
Questions from Hollingbourne
Is Hollingbourne within the area you cover?
Yes. Hollingbourne is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
Can the work in Hollingbourne be done at night or at weekends?
Yes, out-of-hours work is a big part of what we do. Your customers, staff or residents in Hollingbourne needn’t be disturbed. When you phone us on 0345 646 2711, or send details by email, mention when the site is quiet.
Can you look after several sites?
Yes. One number covers all your sites in our area, with visits on a regular schedule.
Do you certify fire dampers?
What you receive is a written report of each test, damper by damper. Failures are set out with the remedials we’d suggest.
Whose job is it to make sure fire dampers are tested?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005, who might be the employer, owner, landlord, facilities manager or managing agent. Keeping fire safety systems working, dampers included, is part of their duty.
How much notice do you need?
That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Which accreditations do you hold?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’re fully insured and have been trading since 2009.
Who has the legal duty for fire safety?
That depends on who controls the premises. Under the Fire Safety Order 2005, it’s the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
Places near Hollingbourne
Also in Hollingbourne
Fire dampers in Hollingbourne buildings
For Hollingbourne, the closest hospital is KIMS hospital, roughly 3.9 miles west. Where patients or residents may need help to leave a building, working dampers matter all the more. Hollingbourne, about 36 miles from central London, is within our usual area. The visit is fixed around your opening hours, not ours.
If you manage a historic building in the area (Leeds Castle is about 1.3 miles south-west), dampers fitted during conversions can be hard to reach and need recording. If you look after a building near Hollingbourne station with a fire risk assessment due, a damper test with a full record is worth having first.
Hollingbourne is about 5 miles east of Maidstone, in Kent. Whether your site is in the middle of Hollingbourne or further out, fire damper testing is available to all kinds of commercial premises, from a single unit to a large public building. We cover 922 places across Kent, large and small.
All of ME17 is covered for fire damper testing, from busy streets to back roads. Streets in the area include Upper Street, Pilgrims Way and Hollingbourne Hill, all of which we cover for fire damper testing. Other places close to Hollingbourne include Eyhorne Street (1 mile south-west), Broad Street (1 mile north-west), Chegworth (2 miles south), Ashbank (2 miles south-west) and Broomfield (2 miles south). Larger places within reach include Maidstone (5 miles west), Ashford (13 miles south-east), Sittingbourne (7 miles north-east), Faversham (11 miles east), Minster (13 miles north-east) and Kings Hill (10 miles west).
Near you in Hollingbourne
Locally, jobs take us to businesses close to Glyder House Sugar Loaves Public House and the streets around them. For rail, the closest station is Hollingbourne station, roughly 0.6 miles west of the centre. Nearby you will also find Laundry Museum (0.9 miles south-west) and Leeds Castle (1.3 miles south-west). Not far away are Detling Hill.
What happens on the day
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. We agree a date with you, plan the drive to Hollingbourne and turn up when the site is quiet.
- First we check the schedule and the last set of results.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Getting ready for the visit
- Find the previous report, if there is one
- Allow time for equipment near the work to be turned off and cool down
- Clear the space around the work
How to get a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Read more
Common problems we fix in Hollingbourne
Dampers are hidden above ceilings, inside risers and behind boxing. Without an access panel nearby, they’re easy to forget, and anything nobody can get to goes untested.
What we are most often called out for:
- Blades that jam part-way when released
- Dampers that can’t be reached without an access panel
- Motorised smoke dampers due for testing
- Missing or out-of-date damper records
The nearest hospital, KIMS hospital, is about 3.9 miles west; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly.
What to look for in a quote
- How they set the interval to the next visit
- What’s included in the scope, part by part
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether a written report and photos are included
What staff can safely do
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.