West Sussex · Fire damper testing
Fire damper testing in Henfield, West Sussex
Professional fire damper testing in and around Henfield, booked around your opening hours and finished with a written report and photos.
- Blades that jam part-way when released
- Fire dampers nobody can get to
- Smoke dampers with no recent test
Fire damper testing for kitchens and businesses in Henfield
Plenty of buildings have dampers nobody has looked at since they were fitted. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We locate and test the dampers we can reach and record the ones we can’t, so you can see exactly what still needs access. The work covers wall and floor dampers, motorised smoke dampers and fusible link fire dampers, and the jobs we see most are buildings with no damper register and fire damper items raised by an assessor.
A building in a smaller place like Henfield might have only a few dampers, but each one still needs drop testing at least once a year, with a record of every result.
We have been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Location
- Henfield (BN5)
- Wider area
- West Sussex
- Paperwork
- Photo report after each visit
- Price
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Fire dampers in Henfield buildings
Henfield is about 40 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible. About 5.4 miles north-east of Henfield is The Dene Hospital, the nearest hospital. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
Hospitals such as The Dene Hospital, about 5.4 miles north-east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Henfield, the same annual testing applies. School buildings such as St Peter's CofE Primary School are typically tested in the holidays, wherever they have dampers.
Henfield is about 7 miles north of Shoreham-by-Sea, in West Sussex. We carry out fire damper testing for businesses, landlords and public buildings in Henfield and the rest of West Sussex. Henfield is one of 371 towns, villages and districts in West Sussex we cover for commercial clients. There’s also a page for Brighton, about 9 miles away.
We cover every part of the BN5 postcode area for fire damper testing and the streets around it. Fire damper testing is available to premises on Upper Station Road, High Street and Lower Station Road and the roads around them. We also cover the places around Henfield: Woodmancote (2 miles south-east), Blackstone (2 miles east), Small Dole (2 miles south), Shermanbury (2 miles north) and High Cross (3 miles east). We also work in nearby towns such as Crawley (13 miles north), Horsham (9 miles north), Worthing (9 miles south-west), Haywards Heath (9 miles north-east), Burgess Hill (7 miles east) and Littlehampton (14 miles south-west).
What’s near Henfield
Around Henfield, our work takes us to kitchens and buildings near The Bell Inn. A little further out are The Dene Hospital (5.4 miles north-east) and Steyning Museum (3.7 miles south-west). The countryside around Henfield includes Woods Mill and Truleigh Hill.
More services for Henfield
How it works
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. In a smaller place like Henfield, parking is rarely the issue, but tell us about gates, roof access and opening hours.
- First we look at any damper register, drawings or earlier test reports.
- Dampers are located one by one and reached through their access panels.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
How to prepare
- Allow time for equipment near the work to be turned off and cool down
- Arrange a key holder or contact on site
- Agree a time when the area can be out of use
Get a fixed quote
Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.
Advice
What happens if it’s left?
Sites in Henfield tested every year build up a history for each damper so repeat problems show up early. If the same damper keeps giving trouble, the record shows it long before it fails outright. It’s better to plan the work at a site near Henfield than wait for a failure.
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, and a neglected system can mean more work. If you’re unsure, phone us on 0345 646 2711 or drop us a line for straight advice and a fixed quote.
Why Henfield businesses choose us
- We diagnose before we treat
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- One contact for all your sites in London and the South East
- Photo reports with every job
Take a look at what affects the cost and how to check a contractor.
What affects the quote in Henfield
You’ll get a fixed price before we start. It takes into account:
- Travel, parking and unloading
- Site requirements such as sign-in and permits
- A single visit or a regular plan
- Whether several sites go on one quote
Several systems or sites on one quote often makes better use of the time. Tell us about everything you’d like looked at and we’ll price it together.
Asking for a quote
Before you ask for a quote, gather:
- The roof, plant room or outside wall the system runs to
- Close-ups of filters, grilles, hatches or access panels
- Problems your staff have spotted
- The times we could work without disrupting the site
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. Then we send a fixed price, before we start.
Henfield: your questions answered
Do you work in villages like Henfield?
Yes. Henfield is within the area we cover across London and the South East. A survey first, from photos or a visit, means we arrive with the right kit.
Who enforces fire safety at workplaces in Henfield?
It’s West Sussex Fire and Rescue Service, which covers Henfield. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Which sectors do you work in?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
How much does fire damper testing cost in Henfield?
We don’t publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before we start.
What happens to the waste?
Anything we remove is contained as we work and taken away with us, from grease and debris to used cleaning water. We don’t leave it behind.
Who has the legal duty for fire safety?
It depends on the building. The Fire Safety Order 2005 puts the duty on the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
What does TR19 mean?
A BESA specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t legislation, but it’s the standard people check against.
What happens if you can’t reach some of it?
We never leave them off the paperwork. The report says which parts couldn’t be reached and why, along with a quote to put access in.
What staff can safely do
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
What fire damper testing cannot fix
In fairness, there are a few things this work will not fix:
- Gaps in the wall or floor around the damper
- Fire alarm or control system faults behind a smoke damper
- Designing the building’s fire compartments
Not sure which it is? You can phone us on 0345 646 2711 or send us an email and we will tell you honestly before you book.
Where we work
- Wall and floor dampers
- Offices and schools
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
- Hospitals and care homes
What the work involves, part by part
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Annual damper testing is part of keeping that in place.
Access panels
Testing depends on getting to the damper. Most need an access panel in the duct and a hatch in the ceiling or wall.
Managing agents and facilities teams in Henfield
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
For anyone managing more than one site, we can schedule visits across all of them on one quote. Each site gets its own report and pictures, so each one has its own record.