Hampshire · Fire damper testing

Hamble-le-Rice fire damper testing

Our technicians work in Hamble-le-Rice on fire damper testing. Fixed quotes, work around your opening hours and photo reports as standard.

  • Dampers affected by leaks or condensation
  • Dampers flagged on a fire risk assessment
  • Gaps in the fire damper test log

Fire damper testing across Hamble-le-Rice

Leave it or put it right?

Leaving damper testing for another year doesn’t make the dampers any more likely to work. The guidance from BESA is at least once a year, so a missed year leaves a gap in the record too. Booking ahead lets us plan the trip to Hamble-le-Rice at a time that suits you.

What you pay reflects the actual work. That’s why we survey first, from pictures or on site, and why the quote is fixed before work begins.

What you get with us

  • Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
  • Out-of-hours work and a 24/7 emergency line
  • Ventilation hygiene specialists since 2009
  • We diagnose before we treat

See our cost guide and our accreditations and certificates.

How we handle fire damper testing in Hamble-le-Rice

Ductwork can carry fire and smoke between compartments, and the damper is what stops it. That depends entirely on the blade closing all the way. Regular drop testing is how that gets checked in each part of the building. We are often asked to deal with dampers clogged with dust or grease and motorised smoke dampers due for testing, across motorised smoke dampers, riser dampers and hospitals and care homes.

Around a place like Hamble-le-Rice, dampers tend to be in schools, care homes, surgeries and hotels rather than big offices. The law on keeping them working does not change with the size of the place.

For insurers and inspectors, the record counts. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.

Location
Hamble-le-Rice (SO31)
Region
Hampshire
Reporting
Written report with pictures
Quote
A fixed quote up front
Hours
Nights, weekends or holidays to suit you
Telephone
0345 646 2711
Last updated
30 October 2026
The Duct Doctor team standing beside their branded white and blue vans

What the work involves, part by part

Smoke dampers

Testing smoke dampers sometimes needs input from whoever looks after the control system. We agree the arrangements with you in advance.

Ceiling voids and risers

Many dampers sit above suspended ceilings. We lift tiles where needed and put them back as we found them.

What affects the cost of fire damper testing

Every site gets its own quote. This is what makes a difference:

  • The size of the system
  • How easy every part is to reach
  • Parking and loading at the site
  • Whether several sites go on one quote

Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered and we’ll price it together.

What we need to know

What to send for a quote:

  • Wide pictures of the system and the area around it
  • Any symptoms, from odd noises to smells or leaks
  • Where the site is and what kind of site it is
  • Your opening hours and when the area is out of use

We do not publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then send you a fixed quote. To start, give us a ring on 0345 646 2711, or email photos.

In-house cleaning or a specialist?

A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.

Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, which is where we come in.

Common questions in Hamble-le-Rice

Is fire damper testing any different in a coastal place like Hamble-le-Rice?

Yes, to a degree: at about 1 mile from the coast, Hamble-le-Rice gets salt-laden air that corrodes metal faster. Corrosion is one of the things that can stop a damper closing, so it’s noted at every test.

Can fire dampers in schools around Hamble-le-Rice be tested in the holidays?

Yes, and it’s the easiest time to do it. The FSA’s register shows about 3 schools and colleges with food registrations within roughly a mile and a half of Hamble-le-Rice. Just call us on 0345 646 2711 or email us with your term dates and we will plan around them.

What does fire damper testing cost?

We don’t publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before any work starts.

Whose job is it to make sure fire dampers are tested?

The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.

Can we book visits on a schedule?

Yes, of course. Send details of the systems and how they’re used, and we will suggest a schedule and quote for it.

Is a quote from photos possible?

Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, then a fixed quote.

Does the law say we must follow TR19?

No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and without records, many insurers may refuse or reduce a claim.

What does TR19 mean?

It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It sets out inspection, cleaning and record keeping, and it takes a risk-based approach.

How the visit works

When we arrive, we check the system against the survey or the photos you sent. Anything unexpected is raised with you before we go further. After that, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. We plan the journey to Hamble-le-Rice and bring what the job is likely to need.

  1. First we look at any damper register, drawings or earlier test reports.
  2. We find every damper and open it up through the access panel.
  3. Fire dampers are drop tested and smoke dampers are run through their controls.
  4. Each one that passes is reset, ready to work.
  5. The results go into a report, with failed dampers and remedials listed.

Preparing for the visit

  • Let us know about permits to work or site inductions
  • Allow time for equipment near the work to be turned off and cool down
  • Clear loose items from the work area

Getting a quote

Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.

Ask for a quote

Read more

What a clean won’t put right

We will always give you a straight diagnosis, so here’s what this work cannot put right:

  • Designing the building’s fire compartments
  • Fire-stopping gaps around the duct where it passes through the wall
  • Dampers that were never installed where they’re needed

If in doubt, call us on 0345 646 2711 or email us and we’ll say what we think.

What the work covers

  • Wall and floor dampers
  • Riser dampers
  • Hospitals and care homes
  • Fusible link fire dampers
  • Offices and schools
  • Motorised smoke dampers

Fire damper testing around Hamble-le-Rice

Hamble-le-Rice is within about 1 mile of the coast. A damper that has corroded can stay open when it should close, which is why coastal sites are worth testing carefully. Food Standards Agency records list about 3 schools, colleges and universities and about 8 care, childcare and hospital premises registered as food businesses across Hamble-le-Rice and its immediate surroundings (about a mile and a half). If any of them has ducted ventilation, its dampers need an annual drop test at least. Hamble-le-Rice’s nearest hospital, Coldeast, is about 1.9 miles east. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.

Medieval Merchant's House, about 4.4 miles north-west, is one of the historic houses near Hamble-le-Rice, and older buildings converted to new uses often have ventilation added later. If you manage offices, shops or flats near Hamble station, the ductwork in them may pass through fire-resisting walls and floors, and any dampers need testing at least once a year.

Hamble-le-Rice is about 3 miles east of Hythe, in Hampshire. Sites in Hamble-le-Rice get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with photos. Hamble-le-Rice is one of 683 towns, villages and districts in Hampshire we cover for fire damper testing.

Fire damper testing in SO31 is surveyed, quoted and booked the same way as anywhere else. If you need fire damper testing at premises on High Street, College Close and Deanfield Close or anywhere close by, we can help. With the B3397 close by, Hamble-le-Rice is easy for our technicians to reach for fire damper testing. We also cover the places around Hamble-le-Rice: Hound (1 mile north-west), Butlocks Heath (1 mile north-west), Netley (2 miles north-west), Bursledon (2 miles north) and Old Netley (2 miles north). We also work in nearby towns such as Winchester (14 miles north), Gosport (8 miles south-east), Havant (15 miles east), Eastleigh (7 miles north), Fareham (6 miles east) and Horndean (14 miles east).

What’s near Hamble-le-Rice

In Hamble-le-Rice, that means kitchens and buildings near The Hamble School, Hamble Common and Ye Old White Harte Public House and the streets around them. For rail, the closest station is Hamble station, roughly 0.8 miles north of the centre. Other landmarks nearby include Coldeast (1.9 miles east) and St Andrew's Castle (0.6 miles south-east). Green spaces nearby include Mercury Marshes.

Map of Hamble-le-Rice © OpenStreetMap contributors

What we are called out for in Hamble-le-Rice

Over time, dust builds up on the blade, the runners and the spring. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.

Most sites get in touch after spotting one of these:

  • Rusted damper blades and springs
  • Gaps in the fire damper test log
  • Dampers clogged with dust or grease
  • Dampers flagged on a fire risk assessment

A school like Hamble Primary School can have any dampers tested over half-term without disturbing lessons.

Before booking anyone

  • Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
  • Whether VAT is included
  • If the quote is a fixed price or an estimate
  • What records you will receive afterwards

Our hiring checklist

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London