Hampshire · Fire damper testing
Firgo fire damper testing
For fire damper testing in Firgo, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Dampers affected by leaks or condensation
- Motorised smoke dampers due for testing
- Dust or grease build-up on damper blades
Fire damper testing in Firgo
Wherever a duct crosses a fire-resisting wall or floor, there should be a fire damper inside it. Most are held open by a fusible link that melts at a set temperature, letting the blade drop and close the duct. Drop testing proves that this still happens, and every result is written down, damper by damper. The work covers hospitals and care homes, offices and schools and wall and floor dampers, and the jobs we see most are buildings with no damper register and fire dampers that fail to drop shut.
For a building in or near Firgo, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Location
- Firgo (RG28)
- Wider area
- Hampshire
- Records
- Written report with pictures
- Price
- A fixed quote up front
- When we work
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Why deal with it now?
Until a damper has been dropped, you can’t say whether it works. A test gives you a clear answer, and we can offer remedials for any that fail, which is far easier to plan for. In a small place like Firgo, a system that fails can take a site out of use.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before we start.
Why Firgo businesses choose us
- One contact for all your sites in London and the South East
- In business since 2009
- Survey first, then a fixed quote
- A written report with photos after each visit
Read how cleaning jobs are priced and our accreditations and certificates.
Looking after it afterwards
Simple habits between visits make a real difference. Our advice:
- File every damper report where your assessor can find it
- Don’t let anything obstruct a damper’s blade
- Act on failed dampers rather than leaving them on file
- Keep ceiling hatches and duct panels easy to open
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Faults on the report are worth closing off quickly.
A simple register of every damper helps a great deal: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
Managing agents and facilities teams in Firgo
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
Fixed quotes for fire damper testing in Firgo
The diagnosis comes before the price. The main factors are:
- How big the system is
- Whether we need access equipment or extra panels
- The times the site is available
- Travel, parking and unloading
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before work begins, so there are no surprises.
Asking for a quote
Before you ask for a quote, gather:
- Detail shots of panels, filters and grilles
- How we’d reach plant on a roof or in a plant room
- Photos showing the whole system and its surroundings
- Any previous report or certificate
To help us quote: the address, the type of site and when it’s open, photos of the system and any previous report or certificate. Once you have those, call 0345 646 2711 or send us an email.
Towns and villages near Firgo
More services for Firgo
What happens on the day
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes anything from a couple of hours for a handful of dampers to a full day for a large building. Seeing the system in pictures first means the trip to Firgo can be planned properly.
- First we look at any damper register, drawings or earlier test reports.
- We find every damper and open it up through the access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
Preparing for the visit
- Tell us where we can park and unload
- Agree a time when the area can be out of use
- Find the previous report, if there is one
Getting a quote
If you need fire damper testing in Firgo, call us on 0345 646 2711 or send us an email. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. We typically send a fixed quote within one working day.
Related advice
Firgo questions
Can you work in Firgo outside opening hours?
Yes, evening, overnight and weekend work is normal for us. Your customers, staff or residents in Firgo needn’t be disturbed. When you call 0345 646 2711, or email photos, mention when the site is quiet.
Which fire and rescue service is responsible for Firgo?
That’s Hampshire and Isle of Wight Fire and Rescue Service. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Which kinds of sites do you work on?
Any commercial site with kitchens or ventilation, from a single café to a large school. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Who is responsible for fire damper testing?
The duty falls on the responsible person for the premises. Depending on the building, that can be the employer, owner, landlord or whoever manages it. We carry out the testing and give them the records.
Do you have insurance?
Yes. We carry full insurance and have been trading since 2009.
Can you price the work without visiting?
Yes, where the photos show enough. If not, a site survey comes first, then a fixed quote.
Will we get a certificate for the dampers?
Our paperwork is a test report, not a certificate of compliance. It lists each damper, the result and any remedials needed.
Do you look at the system first?
Yes, always. We diagnose before we treat: the survey shows what needs doing and what access we need, and the quote is based on that.
Different parts, different methods
Offices and retail
Offices and shops often have dampers above ceilings that are rarely opened. We can test in the evening, overnight or at weekends to keep disruption down.
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Annual damper testing is part of keeping that in place.
What staff can safely do
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Firgo buildings and fire safety
Firgo is covered by Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty. Firgo is about 58 miles from central London, well within the area we cover across London and the South East. The visit is fixed around your opening hours, not ours.
Every damper we test around Firgo gets its own entry in the report, with photos. A school like Testbourne Community School can have any dampers tested over half-term without disturbing lessons.
Firgo is about 6 miles east of Andover, in Hampshire. We provide fire damper testing for commercial premises of every kind in Firgo and the rest of Hampshire. Firgo is one of 683 places in Hampshire where we work for commercial clients. For sites nearby, see our Southampton page (20 miles or so).
We work across the RG28 postcode area for fire damper testing and the roads nearby. Neighbouring places we cover for fire damper testing include Hurstbourne Priors (2 miles north-west), Whitchurch (2 miles north), Wells-in-the-Field (2 miles north-east), Freefolk (3 miles north-east) and Cole Henley (4 miles north). Larger places within reach include Basingstoke (11 miles north-east), Winchester (10 miles south), Andover (6 miles west), Chandler's Ford (15 miles south), Tadley (13 miles north-east) and Hyde (9 miles south).
What’s near Firgo
The closest station to Firgo is Whitchurch (Hampshire) station, about 2.4 miles north.