Hampshire · Fire damper testing
Wells-in-the-Field fire damper testing
We cover Wells-in-the-Field for fire damper testing. Fixed quotes, work around your opening hours and photo reports on every job.
- Fire dampers with no recent test record
- Motorised smoke dampers due for testing
- Dampers that stick or will not close fully
What fire damper testing looks like in Wells-in-the-Field
Food Standards Agency data includes about 4 schools, colleges and universities and about 4 hospitals, care homes and childcare premises across Wells-in-the-Field and its immediate surroundings (about a mile and a half). If any of them has ducted ventilation, its dampers need an annual drop test at least. Wells-in-the-Field is covered by Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. We cover Wells-in-the-Field, about 56 miles from central London, as part of our work across London and the South East. We work evenings, overnight and at weekends, so the visit fits around the site.
Every damper we test around Wells-in-the-Field gets its own entry in the report, with photos.
Wells-in-the-Field is about 7 miles east of Andover, in Hampshire. Across the RG28 area, we cover fire damper testing for commercial sites. Wells-in-the-Field is one of 683 towns, villages and districts in Hampshire we cover for fire damper testing. You can also see our page for Reading, about 21 miles away.
Fire damper testing in RG28 is surveyed, quoted and booked the same way as anywhere else. That includes premises on Priory Lane and London Road and nearby roads. Neighbouring places we cover for fire damper testing include Freefolk (1 mile east), Whitchurch (1 mile west), Cole Henley (2 miles north), Firgo (2 miles south-west) and Hurstbourne Priors (3 miles south-west). Further out, we also cover Basingstoke (9 miles east), Winchester (12 miles south), Andover (7 miles west), Tadley (11 miles north-east), Hyde (11 miles south) and Popley (11 miles east).
Landmarks near Wells-in-the-Field
Typical jobs here are in premises near Testbourne Community School and Railway Hotel. The nearest railway station is Whitchurch (Hampshire) station, about 1.1 miles west.
Fire damper testing in Wells-in-the-Field, done properly
Wherever a duct crosses a fire-resisting wall or floor, there should be a fire damper inside it. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. Drop testing proves that this still happens, and we record the result for every damper we test. The work covers hospitals and care homes, riser dampers and motorised smoke dampers, and common reasons people get in touch are dampers hidden with no access panel or hatch and buildings with no damper register.
For a building in or near Wells-in-the-Field, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
Think of the report as the system’s health record: dated, with photos, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.
- Location
- Wells-in-the-Field (RG28)
- Wider area
- Hampshire
- Records
- Written report with pictures
- Quote
- Fixed quote, normally within a working day
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Managing agents and facilities teams in Wells-in-the-Field
Multi-site operators often want one contractor and one number. We cover South East England and London, so visits at different addresses can be planned together and kept to a regular schedule.
Whether it’s one building or many, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.
Your questions about fire damper testing in Wells-in-the-Field
Do you work overnight in Wells-in-the-Field?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Wells-in-the-Field needn’t be disturbed. Let us know the hours you’re closed and we will book within them.
Do you do school damper testing in Wells-in-the-Field in the summer holidays?
Yes, out-of-term visits are normal for schools. The FSA’s register shows about 4 schools and colleges with food registrations within roughly a mile and a half of Wells-in-the-Field. You can phone us on 0345 646 2711 or drop us a line with the dates the site is empty.
What if a fire damper will not close?
We note the failure and what we found. A repair or a replacement can follow as a remedial job with a fresh test at the end.
Can you look after several sites?
Yes. Our area covers London and the South East, so we can schedule a run of sites as one programme. Every site has its own report.
What happens to dampers you can’t get to?
We do not leave it off the report; we note it as not reached. With an access panel fitted, it can be tested on a return visit.
How much notice should we give?
For planned work, earlier is better, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
Which kinds of sites do you work on?
Commercial premises of every kind: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
Is TR19 a legal requirement?
Not in itself. Insurers, fire officers and EHOs look to TR19® as the benchmark, and many insurance policies ask for proof of TR19® cleaning. The legal duty sits in the Regulatory Reform (Fire Safety) Order 2005 in England and Wales.
In-house cleaning or a specialist?
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Do you need fire damper testing in Wells-in-the-Field?
Corrosion is another common cause of failure. Water leaks, condensation and damp plant areas attack the casing, blade and spring, and the damper can seize quietly where no one sees it.
It’s time to book a visit if you see:
- Dampers hidden with no access panel or hatch
- Motorised smoke dampers due for testing
- Fire dampers that haven’t been tested for over a year
- Buildings with no damper register
For schools like Whitchurch Church of England Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What to look for in a quote
- Proof of insurance
- What records you’ll receive afterwards
- How areas they cannot reach will be recorded
- When the next visit should be, and why
What we do, step by step
We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. If you can send pictures, we can arrive in Wells-in-the-Field knowing what to expect.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Before we arrive
- Mention any sign-in, permit or induction we need
- Let us know about parking and loading
- Make sure someone can let us in and lock up afterwards
Ask for a quote
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Advice
Different parts, different methods
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. Heat melts the link and the blade falls shut across the duct. Testing means dropping the blade, checking the full close and resetting it.
Ceiling voids and risers
Damp plant areas are hard on dampers. We note any rust or water damage on the report so the cause can be tackled.
When it’s something else
To be straight with you, some problems need a different fix:
- Sign-off of the whole building’s fire safety
- Deciding where dampers should be fitted
- Ductwork crossing a fire wall with no damper fitted
If in doubt, call 0345 646 2711, or email photos and we’ll say what we think.
Where we work
- Hospitals and care homes
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
- Wall and floor dampers
- Offices and schools
Nearby places to Wells-in-the-Field
Also in Wells-in-the-Field
Looking after it afterwards
Think of this as the after-treatment advice, in brief:
- Close off damper faults promptly
- File every damper report where your assessor can find it
- Book the next test before the year runs out
- Don’t let anything obstruct a damper’s blade
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. File it with your fire safety log so it’s ready when your assessor or insurer asks.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.