Surrey · Fire damper testing
Fire damper inspection in Fetcham
Looking for fire damper testing in Fetcham? We diagnose first, fix the price and book the work around your hours, then sign off with a report and photos.
- Corroded dampers in damp risers and plant rooms
- Dust or grease build-up on damper blades
- Smoke dampers with no recent test
Fire damper testing for kitchens and businesses in Fetcham
Some dampers haven’t been tested since the day they went in. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We locate and test the dampers we can reach and record the ones we cannot, so you know where the gaps are. If you’re dealing with smoke dampers that need testing through their controls and buildings with no damper register, we can put it right.
In smaller places like Fetcham, dampers are often in the ductwork serving kitchens, plant rooms and escape routes. Testing is planned around residents, pupils or guests.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Where
- Fetcham (KT22, KT23)
- Wider area
- Surrey
- Reporting
- Written report with pictures
- Price
- A fixed price before any work starts
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Do you need fire damper testing in Fetcham?
In most buildings, Fetcham included, dampers are out of sight in ceiling voids, risers and service shafts. Without an access panel nearby, they’re easy to forget, and anything nobody can get to goes untested.
Look out for these warning signs:
- Dampers flagged on a fire risk assessment
- Dust or grease build-up on damper blades
- Fire dampers that haven’t been tested for over a year
- Dampers affected by leaks or condensation
If you manage a historic building in the area (Polesden Lacey is about 2.4 miles south), dampers fitted during conversions can be hard to reach and need recording.
What to look for in a quote
- Whether the figure could change on the day
- How VAT is shown on the quote
- When the next visit should be, and why
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
Between visits
How long the results last depends on use and care. Here’s what we suggest:
- Never wedge or tie a damper open
- Report leaks or condensation near ductwork quickly
- Keep damper test reports with the fire safety log
- Keep to at least yearly testing
Share the results with your fire risk assessor, so the assessment reflects where the dampers stand. Outstanding faults should be dealt with, not left on file.
A simple register of every damper helps a great deal: location, type, last test date and result. It stops dampers getting lost as the building changes.
Your questions about fire damper testing in Fetcham
Do you work overnight in Fetcham?
Yes, nights and weekends are routine for us. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
Do you test dampers in schools in Fetcham during the holidays?
Yes, out-of-term visits are normal for schools. With about 7 schools and colleges on the FSA’s register within roughly a mile and a half of Fetcham, it pays to plan holiday dates ahead. Booking early in the term gives the best choice of holiday dates.
Will we get a certificate for the dampers?
We test, record and report, rather than certify dampers to a standard. It lists each damper, the result and any remedials needed.
Do you offer maintenance contracts?
Yes, of course. Tell us what you have and how it’s used and we’ll propose a schedule with a fixed quote.
What about areas you cannot get to?
The report shows them clearly. Often the fix is extra access, such as new panels in ductwork, and we can fit those.
Is there a survey before the work?
Yes, always. Diagnosis comes before treatment: the survey tells us what the system needs and how to reach it and the fixed quote is built on it.
What information do you need?
The site address, the type of premises and your opening hours, plus photos of the system and your last certificate or report if you have one.
Can you quote from pictures?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, and the quote follows that.
Managing agents and facilities teams in Fetcham
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Multi-site operators often want one contractor and one number. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
What happens if it’s left?
If a damper can’t close, the wall it sits in has a hole in it during a fire. Everything else about the compartment can be right and the duct still lets it down. Testing now is how you find out before it matters. Light use slows the build-up but doesn’t stop it.
The cost depends on the size of the system, the condition it’s in and how easy it is to reach. You get a fixed price before any work starts, so you know where you stand.
Why us?
- Each visit written up, with photos
- Every job surveyed first
- Ventilation hygiene specialists since 2009
- Fully insured
Take a look at how cleaning jobs are priced and our accreditations.
Fetcham buildings and fire safety
Going by the FSA’s register, there are about 7 schools, colleges and universities and about 4 caring premises (care homes, nurseries and hospitals) serving food within roughly a mile and a half of the centre of Fetcham. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Surrey Fire and Rescue Service covers Fetcham. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up. The nearest hospital to Fetcham is Headley Court, about 3.4 miles east. Where patients or residents may need help to leave a building, working dampers matter all the more.
If you manage a care home or clinic near Fetcham, the testing that a hospital like Headley Court (about 3.4 miles east) relies on applies to your dampers too. If you manage a school site such as Oakfield Junior School, any fire dampers can be tested in the holidays.
Fetcham is about 5 miles south-west of Epsom, in Surrey. Every kind of commercial site in Fetcham, we can take on fire damper testing. We can work out of hours so the site keeps running. We cover 395 places across Surrey, large and small. You can also see our page for Guildford, about 10 miles away.
Here we cover the KT22 and KT23 postcode area for fire damper testing. Local streets include The Street, Bell Lane and Gatesden Road, all of which we cover for fire damper testing. Main roads around Fetcham include the B2122, so getting to you is simple for evening and night visits. Neighbouring places we cover for fire damper testing include Great Bookham (1 mile south-west), Leatherhead (1 mile east), Mickleham (2 miles south-east), Little Bookham (2 miles south-west) and Westhumble (3 miles south). Further out, we also cover Guildford (10 miles west), Woking (10 miles west), Epsom (5 miles north-east), Horley (11 miles south-east), Redhill (9 miles south-east) and Ewell (6 miles north-east).
Near you in Fetcham
Typical jobs here are in premises near River Mole LNR, Therfield School and Yehudi Menuhin School and the streets around them. The nearest railway station is Leatherhead station, about 1.2 miles north-east of the centre. Nearby you’ll also find Headley Court (3.4 miles east) and Betchworth Castle (4.5 miles south-east). Green spaces nearby include Claremont Lake and Box Hill.
How it works
Your staff don’t need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Before we leave, the area is tidied and the paperwork follows. For a site near Fetcham, the work is booked around your opening hours, evenings and weekends included.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
Preparing for the visit
- Allow time for equipment near the work to be turned off and cool down
- Tell us about site rules, permits or sign-in
- Let us know when the site is closed or quiet
Getting a quote
If you need fire damper testing in Fetcham, give us a ring on 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, plus photos or the previous report if they’re to hand. A fixed quote typically follows within one working day.
Related advice
More services for Fetcham
How we price fire damper testing
The quote reflects the site in front of us. We consider:
- How easy every part is to reach
- How big the system is
- Site rules, permits and inductions
- Whether it’s a one-off visit or part of a schedule
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we’ll explain what it covers.
Helping us quote
Photos and a few facts are often enough to price the work. Useful things to send:
- The site address and the type of premises
- The paperwork from the last visit, if you have it
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
Getting a quote does not take long. Call or email with a few details and you’ll usually have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
What the work involves, part by part
Ceiling voids and risers
Ceiling voids are where lots of dampers end up. We lift tiles where needed and put them back as we found them.
Fusible link fire dampers
Most fire dampers are held open by a fusible link. Heat melts the link and the blade falls shut across the duct. Testing means dropping the blade, checking the full close and resetting it.