Kent · Fire damper testing
Danaway fire damper testing
Fire damper testing for Danaway, with a survey first and a report with pictures at the end. Call for a fixed quote.
- Damper actions from a fire risk assessment
- Dampers clogged with dust or grease
- Fire dampers that haven’t been tested for over a year
In-house cleaning or a specialist?
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Fire damper testing in Danaway
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. If you have fire dampers that fail to drop shut and dampers that can’t be reached without an access panel, we can help.
Somewhere as small as Danaway, fire dampers are normally found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
Nothing is signed off by word of mouth: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Danaway (ME9)
- Wider area
- Kent
- Records
- Photo report after each visit
- Price
- A fixed quote up front
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
For landlords and multi-site operators
Facilities teams in offices, schools and healthcare sites book us too across Kent. Work can be phased by floor, building or site to keep disruption down.
Records are where multi-site compliance often slips. Every visit ends with a dated report and photos, ready to show insurers, fire officers or EHOs.
What the work involves, part by part
Smoke dampers
Smoke dampers are motorised and run by a control system. Testing means operating them from the controls to confirm the blade moves all the way.
Schools, hospitals and care homes
Where residents cannot easily get out, holding fire and smoke back matters even more. Annual damper testing is part of keeping that in place.
Fire damper testing in Danaway: local notes
Going by the FSA’s register, there are about 3 schools, colleges and universities and about 6 hospitals, care homes and childcare premises serving food within about 1.5 miles of central Danaway. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Danaway sits within the area of Kent Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. Danaway is about 35 miles from central London, well within the area we cover across London and the South East. Visits are booked around your hours, evenings and weekends included.
Drop testing in and around Danaway means releasing each blade, watching it close and resetting it.
Danaway is about 3 miles west of Sittingbourne, in Kent. Whatever kind of site you run in Danaway, fire damper testing is something we can help with. We can work out of hours so trading is not interrupted. Danaway is one of 922 towns, villages and districts in Kent where we work for commercial clients. We also work in Maidstone, around 8 miles away.
Postcode districts we cover here for fire damper testing: ME9. Streets in the area include Westfield Gardens, Oak Close and Wormdale Hill, and we cover them all for fire damper testing. Other places close to Danaway include Oad Street (1 mile south-east), Chestnut Street (1 mile north-east), Newington (1 mile north), Keycol (1 mile north-east) and Bobbing (1 mile north-east). Further out, we also cover Maidstone (8 miles south-west), Sittingbourne (3 miles east), Gravesend (14 miles north-west), Whitstable (15 miles east), Faversham (9 miles east) and Minster (8 miles north-east).
Local landmarks in Danaway
Typical jobs here are in premises near Westlands School and Plough & Harrow pub and the streets around them. The nearest railway station is Newington station, roughly 1.2 miles north. Well-known places in the area include Bayford Court (3 miles east) and Court Hall Museum (2.7 miles east). Green spaces nearby include Detling Hill.
Places near Danaway
Other services in Danaway
Why it’s worth doing now in Danaway
Fire risk assessors and insurers may ask to see damper test records. A current report on file means you can answer right away when the question comes. If the system at a site near Danaway fails, there may be nowhere nearby to move to.
The cost depends on the size of the system, what state it’s in and how easy it is to reach. You get a fixed price before we start, so there are no surprises.
Why us?
- Fully insured
- CHAS and SafeContractor accredited, with ISO 9001
- Fixed quotes, usually within one working day
- In business since 2009
Read what affects the cost or our accreditations.
What affects the quote in Danaway
Every site gets its own quote. These are the things that affect it:
- The times the site is available
- One-off work versus a regular cycle
- Site requirements such as sign-in and permits
- The scale of the work
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we’ll go through it with you.
Asking for a quote
What to send for a quote:
- The paperwork from the last visit, if you have it
- The site address and the type of premises
- When the site is open and when it’s quiet
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
If you need fire damper testing in Danaway, give us a ring on 0345 646 2711, or send details by email. Let us know the site type and the opening hours, and send photos or your last report if you can. We normally send a fixed quote within one working day.
FAQs for Danaway
Who enforces fire safety at workplaces in Danaway?
That’s Kent Fire and Rescue Service. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Do you do school damper testing in Danaway in the summer holidays?
Yes, holiday work suits schools best. Food Standards Agency records list about 3 schools, colleges and universities with registered kitchens within about a mile and a half of Danaway. You can call us on 0345 646 2711 or send us an email with the dates the site is empty.
What if a damper has no access panel?
We record it as not tested and explain why. Access panels can be installed so the damper can be tested next time.
Will we have to shut during the visit?
Not normally. Out-of-hours visits keep the disruption down. Larger jobs can be phased over several visits to keep things running.
Who is the responsible person?
The Fire Safety Order 2005 calls them the responsible person: normally the employer or whoever controls the premises. Landlords, facilities managers and managing agents can also hold responsibility.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before we start, and waste is contained as we go. Before we leave, we tidy up and clean down.
Can you come out in an emergency?
Yes, day and night, every day of the year. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
What types of premises do you cover?
All kinds of commercial and public premises: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
How it works
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool before work begins, and floors and nearby surfaces are sheeted. The work itself takes a few hours for a single floor, with bigger buildings phased over more than one visit. Rural roads and tight entrances are worth telling us about before a visit to Danaway.
- First we look at any damper register, drawings or earlier test reports.
- We find every damper and open it up through the access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Getting ready for the visit
- Clear the space around the work
- Mention any locked doors, roof access or ceiling voids
- Make sure equipment near the work can be switched off and left to cool
How to get a quote
To get a fixed quote, give us a ring on 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. We typically come back within one working day.
Related advice
Do you need fire damper testing in Danaway?
Over time, dust builds up on the blade, the runners and the spring. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
Keep an eye out for any of the following:
- Fire dampers that fail to drop shut
- Fire dampers nobody can get to
- Dampers flagged on a fire risk assessment
- Fire dampers that haven’t been tested for over a year
Site managers at schools such as Borden Church of England Primary School usually find the summer break the easiest time for ceiling work like damper testing.
What your quote should include
- What insurance they carry
- What records you will receive afterwards
- What happens if part of the system can’t be accessed
- Which accreditations they hold, and whether you can check them