West Sussex · Fire damper testing
Colworth fire damper testing
Fire damper testing for Colworth, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Corroded dampers in damp risers and plant rooms
- Dust or grease build-up on damper blades
- Gaps in the fire damper test log
What staff can safely do
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
Fire damper testing in Colworth, done properly
Plenty of buildings have dampers nobody has looked at since they were fitted. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We locate and test the dampers we can reach and record the ones we cannot, so you know where the gaps are. Common call-outs are for smoke dampers that need testing through their controls and gaps in the fire damper test log, on fusible link fire dampers, wall and floor dampers and offices and schools.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Colworth (PO20)
- Wider area
- West Sussex
- Records
- Report and pictures after the visit
- Price
- Fixed quote, typically within a working day
- Hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Why deal with it now?
Putting testing off does not change whether the dampers will close; it just means you do not know. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. It’s worth booking a check, because nobody sees inside a duct day to day.
Working hours, access and the scale of the site can all change the price. We take each of them into account, and the price is fixed before we start.
Why choose Duct Doctor in Colworth
- Out-of-hours work and a 24/7 emergency line
- Fixed quotes, usually within one working day
- Full insurance on every job
- We diagnose before we treat
Common questions in Colworth
Do you do school damper testing in Colworth in the summer holidays?
Yes. The holidays are the usual time for school work. The FSA’s register shows about 4 schools and colleges with food registrations within roughly a mile and a half of Colworth. Tell us your holiday dates and we will book the visit for when the site is empty.
Can you get to a site in Colworth?
Yes, Colworth is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Which kinds of sites do you work on?
Commercial premises of every kind: kitchens, offices, schools, healthcare, retail, leisure and food production. Work is timed around how each site runs.
How much time does a damper test visit need?
As a guide, it takes a morning or an afternoon for a small number of dampers, longer where there are many. The number of dampers and how they’re reached decide the rest.
Does the law say we must follow TR19?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Can you test motorised smoke dampers?
Yes. We operate each smoke damper from its controls and check it opens and closes fully. Where a controls contractor needs to be involved, we arrange it with you.
Who has the legal duty for fire safety?
That depends on who controls the premises. Under the Fire Safety Order 2005, it’s the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
Can one contract cover all our sites?
Yes. Send the list of sites and the work at each and you’ll get one fixed quote.
What a clean will not put right
We will not sell you work that doesn’t address the problem, so these are the things it will not cover:
- Deciding where dampers should be fitted
- Control wiring problems outside the damper itself
- Dampers that were never installed where they’re needed
If you are not sure, just give us a ring on 0345 646 2711, or email photos and we will give you a straight answer before booking.
Parts of the system we cover
- Motorised smoke dampers
- Hospitals and care homes
- Wall and floor dampers
- Offices and schools
- Riser dampers
- Fusible link fire dampers
What happens on the day
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. From there, it takes anything from a couple of hours for a handful of dampers to a full day for a large building. Rural roads and tight entrances are worth telling us about before a visit to Colworth.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Dampers are located one by one and reached through their access panels.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- We report on every damper, with faults and suggested remedials set out.
Preparing for the visit
- Clear the space around the work
- Allow time for equipment near the work to be turned off and cool down
- Mention any locked doors, roof access or ceiling voids
Getting a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
More services for Colworth
Different parts, different methods
Fusible link fire dampers
A damaged or painted link can stop a damper doing its job. Each link is looked at as part of the test and note anything that isn’t right.
Ceiling voids and risers
Many dampers sit above suspended ceilings. We lift tiles where necessary and put them back as we found them.
Fire damper testing around Colworth
Colworth is within about 3 miles of the coast. Near the sea, we look closely for rust on dampers serving intakes and louvres. Food Standards Agency data includes about 4 schools, colleges and universities within about 1.5 miles of central Colworth. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. For Colworth, the closest hospital is Bognor Regis War Memorial Hospital, roughly 2.2 miles south-east. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
Bognor Regis War Memorial Hospital, about 2.2 miles south-east of Colworth, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests. If you manage a school site such as Bartons Primary School, any fire dampers can be tested in the holidays. Historic houses near Colworth, with Goodwood House about 4 miles north-west, are a reminder that older buildings can hold dampers in unexpected places.
Colworth is about 2 miles north of Bognor Regis, in West Sussex. Across the PO20 area, we can carry out fire damper testing at your premises. Across West Sussex, we cover 371 places, and Colworth is one of them. Portsmouth is in our area too, about 16 miles from Colworth.
Work in PO20 is surveyed, quoted and booked the same way as anywhere else. Neighbouring places we cover for fire damper testing include Merston (1 mile west), Oving (2 miles north-west), Lagness (2 miles south-west), Runcton (2 miles west) and Shopwyke (2 miles north-west). Larger places within reach include Worthing (13 miles east), Chichester (4 miles north-west), Selsey (7 miles south-west), Littlehampton (8 miles east), Emsworth (10 miles west) and Rustington (9 miles east).
Near you in Colworth
Locally, jobs take us to businesses close to The Regis School and The Brooks Local Nature Reserve and the streets around them. The nearest railway station is Bognor Regis station, about 2.5 miles south-east. Nearby you’ll also find Bognor Regis Museum (2.7 miles south-east) and Tote Copse Castle (1.3 miles north-east).
What affects the quote in Colworth
Before we fix a price, we need to know a few things. We look at:
- Working hours and out-of-hours timing
- What state the system is in
- How many systems or sites are involved
- The size of the system
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at, and you’ll get one fixed quote.
Asking for a quote
A few details help us quote accurately. When you get in touch, it helps to send:
- Close-ups of filters, grilles, hatches or access panels
- Wide pictures of the system and the area around it
- The paperwork from the last visit, if you have it
- The site address and the type of premises
Need a price for fire damper testing? Please call 0345 646 2711, or email photos with a few details about the site. We’ll talk you through the work and give you a fixed quote before you commit to anything.
Managing agents and facilities teams in Colworth
Facilities teams in offices, schools and healthcare sites book us too across West Sussex. Work can be phased by floor, building or site to keep disruption down.
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with pictures.