Oxfordshire · Fire damper testing
Fire Damper Testing in Chalgrove
Fire damper testing in Chalgrove from ventilation hygiene specialists trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Dampers clogged with dust or grease
- Smoke dampers that need testing through their controls
- Dampers that can’t be reached without an access panel
What affects the cost of fire damper testing
You will get a fixed price before any work starts. It’s based on:
- Whether it’s a one-off visit or part of a schedule
- Whether we need access equipment or extra panels
- How many systems or sites are involved
- Site rules, permits and inductions
A single site or a whole portfolio, the quote is built the same way: the work involved, the access and the timing. The price is fixed before any work starts.
Asking for a quote
We can often survey from photos. Try to include:
- Where the site is and what kind of site it is
- Any access panels or hatches you can see
- How we’d reach plant on a roof or in a plant room
- Any previous report or certificate
Some systems can be priced from pictures; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Fire damper testing in Chalgrove
Plenty of buildings have dampers nobody has looked at since they were fitted. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we cannot get to, so you know where the gaps are. The work covers riser dampers, wall and floor dampers and hospitals and care homes, and the jobs we see most are fire dampers nobody can get to and fire dampers with no recent test record.
A building in a smaller place like Chalgrove might have only a few dampers, and each still needs an annual drop test at least, with a record of every result.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Location
- Chalgrove (OX44)
- Wider area
- Oxfordshire
- Paperwork
- Photo report after each visit
- Price
- Fixed quote, typically within a working day
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Chalgrove: your questions answered
Do you cover smaller places like Chalgrove?
Yes. Villages and rural sites across the South East are part of our work, Chalgrove included. Photos of the system and directions to the site help us plan the visit.
Which fire and rescue service is responsible for Chalgrove?
That’s Oxfordshire Fire and Rescue Service. If a fire safety officer audits the building, they may ask for the latest damper test records.
What about areas you can’t get to?
We record them on the report, with a note of where it is, and we tell you what would make it reachable, for example new access panels.
What does TR19 mean?
A BESA specification in two main parts: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not law, but it’s the benchmark.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. We do not leave it behind.
Whose job is it to make sure fire dampers are tested?
The duty falls on the responsible person for the premises. Depending on the building, that can be the employer, owner, landlord or whoever manages it. We carry out the testing and give them the records.
Can you test motorised smoke dampers?
Yes, as well as drop testing fire dampers. The results go into the same report, so you have one record.
Do you offer maintenance contracts?
Yes, of course. Tell us what you have and how it’s used and we’ll propose a schedule with a fixed quote.
Fire damper testing around Chalgrove
The fire and rescue service for Chalgrove is Oxfordshire Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. We cover Chalgrove, about 44 miles from central London, as part of our work across London and the South East. We work evenings, overnight and at weekends, so the visit fits around the site.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Adwell House is about 4 miles north-east), finding every damper is the first job.
Chalgrove is about 7 miles south-west of Thame, in Oxfordshire. Across the OX44 area, we can carry out fire damper testing at your premises. 443 places in Oxfordshire are on our list, large and small. There’s also a page for Oxford, roughly 9 miles from Chalgrove.
We work across the OX44 postcode area for fire damper testing and the streets around it. That includes premises on High Street, Chapel Lane and The Green and the roads around them. Chalgrove is on the B480, so it’s easy for us to get to for out-of-hours visits. We also cover the places around Chalgrove: Brightwell Baldwin (2 miles south-east), Roke (2 miles south), Britwell Salome (3 miles south-east), Pyrton (3 miles east) and Watlington (3 miles south-east). Within a short drive, we also cover Oxford (9 miles north-west), Didcot (8 miles south-west), Abingdon-on-Thames (9 miles west), Thame (7 miles north-east), Henley-on-Thames (12 miles south-east) and Grove (15 miles west).
Local landmarks in Chalgrove
Typical jobs here are in premises near The Red Lion Public House and the streets around them. A little further out are Wallingford Castle (4.8 miles south) and Aston Martin Heritage Trust Museum (2.5 miles west). Not far away are Wells Farm.
What we do, step by step
Night work is normal for us. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes a few hours for a single floor, with bigger buildings phased over more than one visit. Everything the job in Chalgrove needs is worked out beforehand, from the survey.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Before we arrive
- Let us know about parking and loading
- Let us know about permits to work or site inductions
- Allow time for equipment near the work to be turned off and cool down
Ask for a quote
We don’t publish a price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, phone us on 0345 646 2711 or email us.
Read more
Multi-site and managed buildings
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
If you look after several sites, we can schedule visits across all of them on one quote. Each site gets its own report and photos, so records stay tidy.
When it’s something else
We won’t sell you work that doesn’t address the problem, so these are the things it will not cover:
- Missing dampers that a designer needs to specify
- Control wiring problems outside the damper itself
- Deciding where dampers should be fitted
Not sure which it is? You can call 0345 646 2711 or drop us a line and we’ll tell you honestly.
What the work covers
- Wall and floor dampers
- Offices and schools
- Hospitals and care homes
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
Part by part
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. Testing goes floor by floor so each one is accounted for.
Schools, hospitals and care homes
Hospitals and care homes stay occupied around the clock. We plan the order of work with the site team so care isn’t interrupted.
Common problems we fix in Chalgrove
Dust settles on damper blades, runners and springs over the years. Where the duct carries grease or cooking vapour, grease coats them too, and either one can hold the blade part-open.
Look out for these warning signs:
- Fire dampers nobody can get to
- Blades that jam part-way when released
- Buildings with no damper register
- Damper actions from a fire risk assessment
If you manage a school site such as Chalgrove Community Primary School, any fire dampers can be tested in the holidays.
Before booking anyone
- What paperwork you get at the end
- What’s included in the scope, part by part
- What happens if part of the system cannot be accessed
- How they set the interval to the next visit
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.