Greater London · Fire damper testing
Fire damper testing in Brompton, Greater London
Fire damper testing across Brompton and nearby, booked around your opening hours and finished with a written report and photos.
- Dampers overdue for their annual drop test
- Dampers affected by leaks or condensation
- Smoke dampers that need testing through their controls
Staff cleaning versus specialist work
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Fire damper testing for kitchens and businesses in Brompton
Not every damper relies on heat. Smoke dampers are motorised and are opened and closed by a control system, so we test them by operating them through those controls and confirming every blade travels fully and comes back. The work covers hospitals and care homes, offices and schools and wall and floor dampers, and the jobs we see most are dirty dampers that may not close and blades that jam part-way when released.
Plenty of London buildings have been refitted more than once, and dampers can end up hidden above new ceilings with no access panel. Locating each damper in a building in Brompton is the first part of a proper test.
Good records are part of the job. You get a written report with pictures after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Place
- Brompton (SW3, SW7, SW1X)
- Region
- Greater London
- Reporting
- Photo report after each visit
- Price
- Fixed quote, usually within a working day
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
What we’re called out for in Brompton
Links and springs age like any other part. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, and that only becomes clear during a drop test.
If you notice any of these, it’s worth a diagnosis:
- Missing or out-of-date damper records
- Corroded dampers in damp risers and plant rooms
- Dampers flagged on a fire risk assessment
- Dirty dampers that may not close
Royal Marsden Hospital, about under half a mile south-west of Brompton, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
What your quote should include
- Proof of insurance
- If they look at the system before pricing
- Whether the price is fixed
- Whether VAT is included
When something else is needed
We will not sell you work that does not address the problem, so these are the things it will not cover:
- Fire risk assessments, which need a fire risk assessor
- Ductwork crossing a fire wall with no damper fitted
- Fire alarm or control system faults behind a smoke damper
If you’re not sure, just call 0345 646 2711 or email us and we will give you a straight answer.
What the work covers
- Motorised smoke dampers
- Wall and floor dampers
- Fusible link fire dampers
- Offices and schools
- Hospitals and care homes
- Riser dampers
Different parts, different methods
Schools, hospitals and care homes
In hospitals and care homes, people are there day and night. We plan the order of work with the site team to keep disruption to a minimum.
Fusible link fire dampers
Spring-operated fire dampers need testing at least once a year. A weak spring or a sticking blade shows up when the damper is dropped.
Common questions in Brompton
Which fire authority looks after Brompton?
Brompton is in the area of London Fire Brigade. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Can you work in Brompton outside opening hours?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Brompton needn’t be disturbed. Tell us your opening hours when you ask for a quote.
What is TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t legislation, but it’s the standard people check against.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Can one contract cover all our sites?
Yes. Tell us the addresses and what each needs and we will quote them together.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’ve been trading since 2009 and we’re fully insured.
Do you work in Brompton?
Yes. We work across Greater London, Surrey, Kent, Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, and that includes Brompton.
How much does fire damper testing cost?
We don’t publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before work begins.
How the visit works
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. From there, it takes a morning or an afternoon for a small number of dampers, longer where there are many. Before any visit in Brompton, we agree where the van can stop and how equipment reaches the system.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Dampers are located one by one and reached through their access panels.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Arrange a key holder or contact on site
- Tell us the best time to work, such as after service or at a weekend
- Mention any locked doors, roof access or ceiling voids
How to get a quote
To get a fixed quote, ring 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You’ll typically have a quote within one working day.
Read more
Fire dampers in Brompton buildings
Going by the FSA’s register, there are about 67 schools, colleges and universities, about 24 care, childcare and hospital premises and about 172 hotels and B&Bs serving food in and around Brompton, up to about a mile and a half out. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. The fire and rescue service for Brompton is London Fire Brigade. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. London buildings tend to have dampers on several floors, so testing is typically done out of hours, a zone at a time.
If you look after a building near London Victoria station with a fire risk assessment due, a damper test with a full record is worth having first. For schools like Hellenic College of London, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Brompton is about 1 mile south of City of Westminster, in Greater London. Brompton gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Brompton is one of 764 towns, villages and districts in Greater London we cover for fire damper testing.
Postcode districts we cover here for fire damper testing: SW3, SW7 and SW1X. You’ll find streets such as West Road, Hans Road and Eaton Lane, and we cover them all for fire damper testing. You’ll find Brompton on the A315 and A3212, which makes it straightforward for our technicians to reach for fire damper testing. If your site is just outside Brompton, we cover Chelsea (1 mile south), Belgravia (1 mile north-east), South Kensington (1 mile south-west), Victoria (1 mile east) and Little Chelsea (1 mile south-west). Larger places within reach include London (3 miles east), St Pancras (3 miles north-east), Shoreditch (4 miles north-east), Walthamstow (9 miles north-east), Hoxton (4 miles north-east) and Whitechapel (4 miles east).
Local landmarks in Brompton
Typical jobs here are in premises near St Thomas More RC Language College, St Joseph's Catholic Primary School and Natural History Museum Library and Archives, among other places. Nearby too are Shuckburgh Arms (within half a mile south-west) and Burton’s Court (0.5 miles south). For rail, the closest station is London Victoria station, about 0.8 miles east of the centre. A little further out are Baynard's Castle (3 miles east) and Berkshire & Westminster Dragoons Museum (less than half a mile south-east). Open spaces near Brompton include Greville Place nature reserve and Serpentine.
More services for Brompton
Fixed quotes for fire damper testing in Brompton
You’ll get a fixed price before any work starts. It takes into account:
- The scale of the work
- Site rules, permits and inductions
- The number of sites or systems
- What state the system is in
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. You’ll have a fixed price before work begins.
What we need to know
Many jobs can be priced from photos and some basics. Send what you can of the following:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Any previous report or certificate
- Close-ups of filters, grilles, hatches or access panels
- Photos showing the whole system and its surroundings
Every quote begins with a look at the system, either from photos and details you send or from a site visit. Then we send a fixed price so you know the cost before we start.
Multi-site and managed buildings
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.