East Sussex · Fire damper testing
Fire damper testing in Broad Street, East Sussex
Fire damper testing across Broad Street and nearby, booked around your opening hours and finished with a written report and pictures.
- Dampers affected by leaks or condensation
- Gaps in the fire damper test log
- Dust or grease build-up on damper blades
The process
We start by comparing what we find with the survey or your photos. Anything unexpected is raised with you before we go further. After that, the work takes a couple of hours for a few dampers, and a day or more across a big site. A few pictures of the system help us make the most of a visit to a place like Broad Street.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
Before we arrive
- Arrange a key holder or contact on site
- Let us know when the site is closed or quiet
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Get a fixed quote
To get a fixed quote, call us on 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. We typically come back within one working day.
Advice
About our fire damper testing in Broad Street
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Broad Street. If there’s a damper register or a set of drawings, share it with us, and we will plan the visit around the building’s hours. The work covers wall and floor dampers, offices and schools and motorised smoke dampers, and people most often call us about corroded dampers in damp risers and plant rooms and motorised smoke dampers due for testing.
Testing in a small place like Broad Street is planned around the journey and access, and the test itself is the same as in any city building.
A written report with photos follows every visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Broad Street (TN36)
- Wider area
- East Sussex
- Records
- Written report with photos
- Quotes
- A fixed quote up front
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
How we price fire damper testing
The quote reflects the site in front of us. We consider:
- Working hours and out-of-hours timing
- How many systems or sites are involved
- The size of the system
- Access, including roofs, risers and ceiling voids
The cost depends on the size of the system, the condition it’s in and access to every part of it. You get a fixed price before work begins, so there are no surprises.
Helping us quote
To speed up the quote, please include:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The postcode and the type of business
- Any access panels or hatches you can see
- Photos showing the whole system and its surroundings
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, and then give you a fixed quote. To start, phone us on 0345 646 2711, or send details by email.
Honest limits
Some problems need a different service or another trade:
- Signing off a building’s overall fire safety
- Fire-stopping gaps around the duct where it passes through the wall
- Fire risk assessments, which need a fire risk assessor
If you’re not sure, just call us on 0345 646 2711 or drop us a line and we will give you a straight answer.
Parts of the system we cover
- Wall and floor dampers
- Offices and schools
- Riser dampers
- Hospitals and care homes
- Fusible link fire dampers
- Motorised smoke dampers
What fire damper testing looks like in Broad Street
Broad Street is within about 3 miles of the coast. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. Broad Street’s nearest hospital, Conquest Hospital, is about 4.3 miles south-west. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. The fire and rescue service for Broad Street is East Sussex Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
The nearest hospital, Conquest Hospital, is about 4.3 miles south-west; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Lamb House is about 4.1 miles north-east), finding every damper is the first job. A school like Icklesham Church of England Primary School can have any dampers tested over half-term without disturbing lessons.
Broad Street is about 5 miles north-east of Hastings, in East Sussex. We carry out fire damper testing for commercial premises of every kind in Broad Street and the rest of East Sussex. Broad Street is one of 289 places in East Sussex we cover for fire damper testing. Maidstone is in our area too, about 25 miles from Broad Street.
All of TN36 is covered for fire damper testing, from the main roads to the quietest streets. Neighbouring places we cover for fire damper testing include Icklesham (1 mile east), Udimore (1 mile north), Cock Marling (2 miles north-east), Three Oaks (2 miles south-west) and Broadland Row (2 miles north-west). Within a short drive, we also cover Hastings (5 miles south-west), Bexhill-on-Sea (9 miles south-west), St Leonards (6 miles south-west), Hastings Old Town (5 miles south-west), Belmont (5 miles south-west) and Hollington (5 miles south-west).
Local landmarks in Broad Street
For rail, the closest station is Doleham station, roughly 1.8 miles west of the centre. A little further out are Camber Castle (3.7 miles east) and Winchelsea Court Hall Museum (2.5 miles east). Not far away are Flatropers Wood.
What your team can do, and what needs us
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, which is where we come in.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That is our job.
Managing agents and facilities teams in Broad Street
Records are where multi-site compliance often slips. Every visit ends with a dated report and photos, ready to show insurers, fire officers or EHOs.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
Why it’s worth doing now in Broad Street
Testing every year builds a history for each damper so repeat problems show up early. If the same damper keeps giving trouble, the record shows it before it becomes a failure. Rural sites can’t always move to another kitchen or room when something fails.
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all play a part.
Why us?
- In business since 2009
- A fixed price before any work starts
- CHAS and SafeContractor accredited, with ISO 9001
- A single point of contact for sites across the South East and London
Read how cleaning jobs are priced and our accreditations and certificates.
How the job changes from site to site
Offices and retail
Fit-outs and tenant changes are hard on dampers. Testing after a fit-out shows whether anything was disturbed.
Ceiling voids and risers
Damp plant areas are hard on dampers. Signs of corrosion or water are recorded so the cause can be tackled.
FAQs for Broad Street
Can sea air affect fire damper testing in Broad Street?
It can, as Broad Street is within about 3 miles of the sea, where salt in the air is hard on metal. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
Which fire authority looks after Broad Street?
That’s East Sussex Fire and Rescue Service. If a fire safety officer audits the building, they may ask for the latest damper test records.
How often should fire dampers be tested?
BESA’s guidance is a test on installation and at least once a year after that. Your fire risk assessment may call for some dampers to be tested more often.
Can you test motorised smoke dampers?
Yes, alongside fire damper drop testing. Smoke and fire dampers are reported together, so you have one record.
Do you have a 24/7 line?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
How much notice should we give?
Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
How do you deal with dampers that can’t be reached?
It’s noted as inaccessible rather than skipped. With an access panel fitted, it can be tested on a return visit.
Do you test dampers in the evening or at weekends?
Yes. We work evenings, overnight and weekends, so offices, shops and schools can carry on as normal. Tell us the hours that suit and we’ll plan around them.