Hampshire · Fire damper testing
Fire damper testing in Broad Oak, Hampshire
We cover Broad Oak for fire damper drop testing and smoke damper testing, with a record for each damper. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Dampers affected by leaks or condensation
- Gaps in the fire damper test log
- Blades that jam part-way when released
What we do, step by step
When we arrive, we check the system against the survey or the photos you sent. If anything is different, we talk it through with the person on site before carrying on. From there, it takes from an hour or two in a small building to several visits on a large estate. In a small place like Broad Oak, the journey is planned ahead and the visit arranged around the site’s hours.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Dig out any earlier paperwork for the system
Ask for a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll normally have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Advice
Fire damper testing in Broad Oak, done properly
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. Spring-operated dampers need testing every year as a minimum. We carry out fire damper testing for buildings in Broad Oak and give you the records to show it’s been done. The work covers wall and floor dampers, riser dampers and offices and schools, and the jobs we see most are gaps in the fire damper test log and motorised smoke dampers due for testing.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. A first test normally starts with finding them all.
A written report with pictures follows each visit, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Location
- Broad Oak (RG29)
- Region
- Hampshire
- Paperwork
- Photo report after each visit
- Quotes
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Why deal with it now?
Sites in Broad Oak tested every year build up a history for each damper so repeat problems show up early. A damper that was slow last year and sticks this year tells you something long before it fails outright. In a place like Broad Oak, ductwork and fans are easy to forget until something goes wrong.
One small site or a whole estate, we price it on the same basis: what needs doing, how we get to it and when. You will have a fixed price before work begins.
Why book with us
- Full insurance on every job
- Photo reports with every job
- A single point of contact for sites across the South East and London
- A fixed price before any work starts
Take a look at what affects the cost and how to check a contractor.
How we price fire damper testing
We don’t publish a price list, because no two systems are the same. The quote depends on:
- Site rules, permits and inductions
- A single visit or a regular plan
- The condition we find in the survey
- Whether several sites go on one quote
What you pay reflects the actual work. That is why every job is surveyed first, and why the quote is fixed before work begins.
What to send for a quote
When you call or email, it’s useful to have:
- Where the site is and what kind of site it is
- Your last certificate, test record or report
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- When the site is open and when it’s quiet
Want a quote for fire damper testing? Please call 0345 646 2711 or drop us a line with a few details about the site. We’ll explain what we’d do and send a fixed quote before anything is booked.
When to call us in Broad Oak
Dampers are hidden above ceilings, inside risers and behind boxing. If there’s no hatch to reach them, they slip off everyone’s list, and anything nobody can get to goes untested.
It’s time to book a visit if you see:
- Dampers flagged on a fire risk assessment
- Smoke dampers with no recent test
- Rusted damper blades and springs
- Dampers that stick or will not close fully
Site managers at schools such as Mayhill Junior School normally find the summer break the easiest time for ceiling work like damper testing.
What to look for in a quote
- What happens if part of the system can’t be accessed
- How VAT is shown on the quote
- Whether the whole system is included, or only the parts that are easy to reach
- Whether a written report and pictures are included
Multi-site and managed buildings
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.
Facilities teams in offices, schools and healthcare sites book us too across Hampshire. Larger estates can be phased building by building to keep disruption down.
Broad Oak questions
Who enforces fire safety at workplaces in Broad Oak?
Broad Oak is in the area of Hampshire and Isle of Wight Fire and Rescue Service. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Will you come out to Broad Oak?
Yes. Villages and rural sites across the South East are part of our work, Broad Oak included. The journey is planned ahead, so a few details about the route help.
How long will damper testing take?
Expect it to take a couple of hours for a few dampers, and a day or more across a big site. How easily we can reach the dampers makes the most difference, and we will give you an idea when we quote.
What do you do to protect the area?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
How often do fire dampers need drop testing?
BESA guidance calls for testing by a competent person at least once a year. Dampers should also be tested when they’re first installed.
What happens if a damper fails its test?
Failed dampers are reported and we can quote to repair or replace them. Once fixed, the damper is drop tested again and the record updated.
Do you survey before quoting?
Yes. Photos often do the job, and larger or hidden systems get a visit.
Do you test dampers in the evening or at weekends?
Yes. We work evenings, overnight and weekends, so the building keeps running. We plan the visit around when the building is quietest.
Fire dampers in Broad Oak buildings
Going by the FSA’s register, there are about 3 schools, colleges and universities serving food within 1.5 miles or so of the middle of Broad Oak. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Hampshire and Isle of Wight Fire and Rescue Service covers Broad Oak. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. Fleet Community Hospital is the nearest hospital, about 3.7 miles north-east of Broad Oak. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
If you manage a care home or clinic near Broad Oak, the testing that a hospital like Fleet Community Hospital (about 3.7 miles north-east) relies on applies to your dampers too.
Broad Oak is about 4 miles west of Fleet, in Hampshire. For fire damper testing in and around Broad Oak, please give us a ring on 0345 646 2711, or email photos for a fixed quote. We work across South East England and London, including Broad Oak. Our Hampshire coverage runs to 683 places, Broad Oak among them. We also work in Reading, around 13 miles away.
Work in RG29 is surveyed, quoted and booked the same way as anywhere else. Nearby, we also carry out fire damper testing in Odiham (1 mile south-west), North Warnborough (1 mile west), Warnborough Green (2 miles west), Winchfield (2 miles north-east) and Greywell (2 miles west). We also work in nearby towns such as Basingstoke (8 miles west), Farnborough (7 miles east), Fleet (4 miles east), Aldershot (7 miles east), Alton (8 miles south) and Yateley (7 miles north-east).
Around Broad Oak
We work in commercial kitchens and buildings around The Waterwitch pub and Robert May's School and the streets around them. Broad Oak’s nearest station is Winchfield station, about 1.8 miles north of the centre. Well-known places in the area include West Green House Agricultural Museum (2.9 miles north) and Hart Shopping Centre (3.8 miles east). Open spaces near Broad Oak include Fleet Pond Nature Reserve and Tundry Hill.
What a clean won’t put right
We’d rather tell you now than book work that will not help, so these are the things it will not cover:
- Signing off a building’s overall fire safety
- Missing dampers that a designer needs to specify
- Designing the building’s fire compartments
Not sure which it is? You can call 0345 646 2711 or drop us a line and we will tell you honestly.
Where we work
- Fusible link fire dampers
- Hospitals and care homes
- Wall and floor dampers
- Offices and schools
- Motorised smoke dampers
- Riser dampers
Nearby places to Broad Oak
Other services in Broad Oak
In-house cleaning or a specialist?
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.