Kent · Fire damper testing
Fire damper testing in Bloodden, Kent
Fire damper drop testing and smoke damper testing, with a record for each damper for businesses, landlords and public buildings in Bloodden. CHAS, SafeContractor and ISO 9001, and fully insured.
- Dampers flagged on a fire risk assessment
- Missing or out-of-date damper records
- Smoke dampers with no recent test
Common questions in Bloodden
Can you work in Bloodden outside opening hours?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Bloodden needn’t be disturbed. When you ring 0345 646 2711 or drop us a line, mention when the site is quiet.
Can you test school fire dampers in Bloodden out of term?
Yes. The holidays are the usual time for school work. The FSA’s register shows about 3 schools and colleges with food registrations within roughly a mile and a half of Bloodden. Send us your term dates when you call 0345 646 2711, or email photos, and we’ll fit the work in.
How do you keep the site clean during the work?
We start with protection: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.
Are you accredited?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We’ve been trading since 2009 and we’re fully insured.
How do you deal with dampers that cannot be reached?
We do not leave it off the report; we note it as not reached. Once there’s a panel or a way through the ceiling, it can be tested.
Who is responsible for fire safety on the premises?
Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: often the employer, owner or occupier. Landlords, facilities managers and managing agents can also hold responsibility.
What’s TR19?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t law, but it’s the benchmark.
Do you certify fire dampers?
Our paperwork is a test report, not a certificate of compliance. It lists each damper, the result and any remedials needed.
Fire damper testing for kitchens and businesses in Bloodden
The point of testing is to find dampers that fail. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper, so the fault doesn’t just sit on a list. If you have dampers overdue for their annual drop test and motorised smoke dampers due for testing, we can put it right.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
A written report with photos follows every visit, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Bloodden (CT3)
- Wider area
- Kent
- Paperwork
- Report and pictures after the visit
- Price
- A fixed quote up front
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Honest limits
A few issues sit outside what this work can do:
- Fire-stopping gaps around the duct where it passes through the wall
- Deciding where dampers should be fitted
- Fire alarm or control system faults behind a smoke damper
If in doubt, phone us on 0345 646 2711 or drop us a line and we’ll say what we think before you book.
What the work covers
- Wall and floor dampers
- Fusible link fire dampers
- Offices and schools
- Motorised smoke dampers
- Riser dampers
- Hospitals and care homes
Landlords, agents and facilities managers
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we’ll come back with a fixed quote.
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
Towns and villages near Bloodden
Also in Bloodden
What affects the quote in Bloodden
There’s no set price list, because sites vary so much. What we look at:
- A single visit or a regular plan
- When the work can happen, such as evenings, overnight or weekends
- The scale of the work
- Any permits to work or inductions
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we will go through it with you.
What to send for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- Where the site is and what kind of site it is
- Photos showing the whole system and its surroundings
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Your opening hours and when the area is out of use
To get a fixed quote, call 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You’ll typically have a quote within one working day.
Different parts, different methods
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, with no classes to work around.
Access panels
If we cannot reach a damper, it goes on the report as inaccessible. We can fit access panels so it’s tested next time.
Bloodden buildings and fire safety
Food Standards Agency records list about 3 schools, colleges and universities and about 5 caring premises (care homes, nurseries and hospitals) registered as food businesses in and around Bloodden, up to about a mile and a half out. If any of them has ducted ventilation, its dampers need an annual drop test at least. For Bloodden, the closest hospital is St Martins Hospital, roughly 4.5 miles north-west. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have. Bloodden sits within the area of Kent Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
If you manage a care home or clinic near Bloodden, the testing that a hospital like St Martins Hospital (about 4.5 miles north-west) relies on applies to your dampers too. If you manage offices, shops or flats near Adisham station, the ductwork in them may pass through fire-resisting walls and floors, and any dampers need testing at least once a year. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Goodnestone Park is about 1.5 miles east), finding every damper is the first job.
Bloodden is about 6 miles south-east of Canterbury, in Kent. Whatever kind of site you run in Bloodden, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. Our area takes in 922 places across Kent, large and small. Our Maidstone page covers sites nearby, about 29 miles away.
Every address in CT3 is covered for fire damper testing, from busy streets to back roads. Neighbouring places we cover for fire damper testing include Adisham (1 mile north-west), Aylesham (1 mile south), Bramling (2 miles north), Bekesbourne (2 miles north-west) and Womenswold (2 miles south). Within a short drive, we also cover Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (11 miles south), Ramsgate (12 miles north-east) and Broadstairs (13 miles north-east).
Near you in Bloodden
There’s a railway station in Bloodden itself: Adisham station. Nearby you’ll also find St Martins Hospital (4.5 miles north-west).
Leave it or put it right?
Faults found early are often simpler to put right. Years of corrosion and dirt can mean the whole damper needs replacing instead. It’s simpler to plan the work at Bloodden now than to arrange it in a hurry later.
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
What you get with us
- A single point of contact for sites across the South East and London
- Accredited under CHAS and SafeContractor, with ISO 9001
- We are fully insured
- Fixed quotes, typically within one working day
Take a look at how cleaning jobs are priced and how to check a contractor.
Between visits
Once we have finished, these simple steps help:
- Brief other trades about dampers in ceilings and risers
- Do not let hatches get painted shut or boarded over
- Don’t let anything obstruct a damper’s blade
- Fix water leaks in plant rooms and risers promptly
Failed dampers are set out separately, each with the fault we found, along with an offer to repair or replace them. Once the work is done, the damper is tested again and the record updated.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. Duct cleaning and damper testing can be planned side by side.
What happens on the day
Your staff don’t need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. For a village or hamlet like Bloodden, tell us about narrow lanes, gates and parking when you book.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Clear loose items from the work area
- Mention any parking or loading restrictions
How to get a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.